--- a/nsprpub/TAG-INFO
+++ b/nsprpub/TAG-INFO
@@ -1,1 +1,1 @@
-NSPR_4_8_6_BETA1
+NSPR_4_8_6_BETA2

--- a/nsprpub/config/autoconf.mk.in
+++ b/nsprpub/config/autoconf.mk.in
@@ -30,20 +30,20 @@ MOD_NAME	= @NSPR_MODNAME@
 
 MOD_MAJOR_VERSION = @MOD_MAJOR_VERSION@
 MOD_MINOR_VERSION = @MOD_MINOR_VERSION@
 MOD_PATCH_VERSION = @MOD_PATCH_VERSION@
 
 LIBNSPR		= @LIBNSPR@
 LIBPLC		= @LIBPLC@
 
-CROSS_COMPILE		= @CROSS_COMPILE@
-BUILD_OPT			= @MOZ_OPTIMIZE@
-MOZ_DEBUG			= @MOZ_DEBUG@
-MOZ_DEBUG_SYMBOLS	= @MOZ_DEBUG_SYMBOLS@
+CROSS_COMPILE	= @CROSS_COMPILE@
+MOZ_OPTIMIZE	= @MOZ_OPTIMIZE@
+MOZ_DEBUG	= @MOZ_DEBUG@
+MOZ_DEBUG_SYMBOLS = @MOZ_DEBUG_SYMBOLS@
 
 USE_CPLUS	= @USE_CPLUS@
 USE_IPV6	= @USE_IPV6@
 USE_N32		= @USE_N32@
 USE_64		= @USE_64@
 GC_LEAK_DETECTOR = @GC_LEAK_DETECTOR@
 ENABLE_STRIP	= @ENABLE_STRIP@
 

--- a/nsprpub/config/config.mk
+++ b/nsprpub/config/config.mk
@@ -43,17 +43,17 @@ NSPR_CONFIG_MK	= 1
 
 #
 # The variable definitions in this file are inputs to NSPR's
 # build system.  This file, if present, is included at the
 # beginning of config.mk.
 #
 # For example:
 #
-# BUILD_OPT=1
+# MOZ_OPTIMIZE=1
 # USE_PTHREADS=1
 # NS_USE_GCC=
 #
 ifndef topsrcdir
 topsrcdir=$(MOD_DEPTH)
 endif
 
 ifndef srcdir

--- a/nsprpub/config/prdepend.h
+++ b/nsprpub/config/prdepend.h
@@ -37,8 +37,9 @@
 
 /*
  * A dummy header file that is a dependency for all the object files.
  * Used to force a full recompilation of NSPR in Mozilla's Tinderbox
  * depend builds.  See comments in rules.mk.
  */
 
 #error "Do not include this header file."
+

--- a/nsprpub/configure
+++ b/nsprpub/configure
@@ -974,33 +974,35 @@ if test "${enable_debug+set}" = set; the
           if test -n "$enableval" -a "$enableval" != "yes"; then
               _DEBUG_FLAGS=`echo $enableval | sed -e 's|\\\ | |g'`
               _SAVE_DEBUG_FLAGS=$_DEBUG_FLAGS
           fi
       else
           MOZ_DEBUG=
       fi 
 else
-  MOZ_DEBUG=
+  MOZ_DEBUG_SYMBOLS=1
 fi
 
 
 # Check whether --enable-debug-symbols or --disable-debug-symbols was given.
 if test "${enable_debug_symbols+set}" = set; then
   enableval="$enable_debug_symbols"
    if test "$enableval" != "no"; then
           MOZ_DEBUG_SYMBOLS=1
           if test -n "$enableval" -a "$enableval" != "yes"; then
               if test -z "$_SAVE_DEBUG_FLAGS"; then
                   _DEBUG_FLAGS=`echo $enableval | sed -e 's|\\\ | |g'`
                   _SAVE_DEBUG_FLAGS=$_DEBUG_FLAGS
               else
                   { echo "configure: error: --enable-debug-symbols flags cannot be used with --enable-debug flags" 1>&2; exit 1; }
               fi
           fi
+      else
+          MOZ_DEBUG_SYMBOLS=
       fi 
 fi
 
 
 # Check whether --enable-win32-target or --disable-win32-target was given.
 if test "${enable_win32_target+set}" = set; then
   enableval="$enable_win32_target"
   OS_TARGET=`echo $enableval | tr a-z A-Z`
@@ -1172,17 +1174,17 @@ if test -z "$CXX"; then
 
     esac
 fi
 
 if test -z "$SKIP_PATH_CHECKS"; then
     # Extract the first word of "$WHOAMI whoami", so it can be a program name with args.
 set dummy $WHOAMI whoami; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1181: checking for $ac_word" >&5
+echo "configure:1183: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_WHOAMI'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$WHOAMI" in
   /*)
   ac_cv_path_WHOAMI="$WHOAMI" # Let the user override the test with a path.
   ;;
   ?:/*)			 
@@ -1243,23 +1245,23 @@ if test "$target" != "$host"; then
     echo "cross compiling from $host to $target"
     cross_compiling=yes
 
     _SAVE_CC="$CC"
     _SAVE_CFLAGS="$CFLAGS"
     _SAVE_LDFLAGS="$LDFLAGS"
 
     echo $ac_n "checking for $host compiler""... $ac_c" 1>&6
-echo "configure:1252: checking for $host compiler" >&5
+echo "configure:1254: checking for $host compiler" >&5
     for ac_prog in $HOST_CC gcc cc /usr/ucb/cc
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1258: checking for $ac_word" >&5
+echo "configure:1260: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_HOST_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$HOST_CC"; then
   ac_cv_prog_HOST_CC="$HOST_CC" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -1295,26 +1297,26 @@ test -n "$HOST_CC" || HOST_CC=""""
         HOST_LDFLAGS="$LDFLAGS"
     fi
 
     CC="$HOST_CC"
     CFLAGS="$HOST_CFLAGS"
     LDFLAGS="$HOST_LDFLAGS"
 
     echo $ac_n "checking whether the $host compiler ($HOST_CC $HOST_CFLAGS $HOST_LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1304: checking whether the $host compiler ($HOST_CC $HOST_CFLAGS $HOST_LDFLAGS) works" >&5
+echo "configure:1306: checking whether the $host compiler ($HOST_CC $HOST_CFLAGS $HOST_LDFLAGS) works" >&5
     cat > conftest.$ac_ext <<EOF
-#line 1306 "configure"
+#line 1308 "configure"
 #include "confdefs.h"
 
 int main() {
 return(0);
 ; return 0; }
 EOF
-if { (eval echo configure:1313: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1315: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_prog_host_cc_works=1 echo "$ac_t""yes" 1>&6
 else
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
   rm -rf conftest*
   { echo "configure: error: installation or configuration problem: $host compiler $HOST_CC cannot create executables." 1>&2; exit 1; } 
 fi
@@ -1333,17 +1335,17 @@ rm -f conftest*
         ;;        
     esac            
 
     for ac_prog in $CC "${target_alias}-gcc" "${target}-gcc"
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1342: checking for $ac_word" >&5
+echo "configure:1344: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -1367,17 +1369,17 @@ fi
 test -n "$CC" && break
 done
 test -n "$CC" || CC="echo"
 
     unset ac_cv_prog_CC
     # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1376: checking for $ac_word" >&5
+echo "configure:1378: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -1397,17 +1399,17 @@ if test -n "$CC"; then
 else
   echo "$ac_t""no" 1>&6
 fi
 
 if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1406: checking for $ac_word" >&5
+echo "configure:1408: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_prog_rejected=no
@@ -1448,17 +1450,17 @@ else
 fi
 
   if test -z "$CC"; then
     case "`uname -s`" in
     *win32* | *WIN32*)
       # Extract the first word of "cl", so it can be a program name with args.
 set dummy cl; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1457: checking for $ac_word" >&5
+echo "configure:1459: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -1480,33 +1482,33 @@ else
 fi
  ;;
     esac
   fi
   test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1489: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1491: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
 ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
 cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 1500 "configure"
+#line 1502 "configure"
 #include "confdefs.h"
 
 main(){return(0);}
 EOF
-if { (eval echo configure:1505: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1507: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
     ac_cv_prog_cc_cross=no
   else
     ac_cv_prog_cc_cross=yes
   fi
 else
@@ -1522,31 +1524,31 @@ ac_compile='${CC-cc} -c $CFLAGS $CPPFLAG
 ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
 if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1531: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1533: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1536: checking whether we are using GNU C" >&5
+echo "configure:1538: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.c <<EOF
 #ifdef __GNUC__
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1545: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1547: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
 fi
 fi
 
 echo "$ac_t""$ac_cv_prog_gcc" 1>&6
 
@@ -1555,17 +1557,17 @@ if test $ac_cv_prog_gcc = yes; then
 else
   GCC=
 fi
 
 ac_test_CFLAGS="${CFLAGS+set}"
 ac_save_CFLAGS="$CFLAGS"
 CFLAGS=
 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1564: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1566: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   echo 'void f(){}' > conftest.c
 if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
   ac_cv_prog_cc_g=yes
 else
   ac_cv_prog_cc_g=no
@@ -1592,17 +1594,17 @@ else
 fi
 
     if test -n "$USE_CPLUS"; then
         for ac_prog in $CXX "${target_alias}-g++" "${target}-g++"
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1601: checking for $ac_word" >&5
+echo "configure:1603: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CXX"; then
   ac_cv_prog_CXX="$CXX" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -1628,17 +1630,17 @@ done
 test -n "$CXX" || CXX="echo"
 
         unset ac_cv_prog_CXX
         for ac_prog in $CCC c++ g++ gcc CC cxx cc++ cl
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1637: checking for $ac_word" >&5
+echo "configure:1639: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CXX"; then
   ac_cv_prog_CXX="$CXX" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -1660,33 +1662,33 @@ else
 fi
 
 test -n "$CXX" && break
 done
 test -n "$CXX" || CXX="gcc"
 
 
 echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1669: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
+echo "configure:1671: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
 
 ac_ext=C
 # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
 ac_cpp='$CXXCPP $CPPFLAGS'
 ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
 ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
 cross_compiling=$ac_cv_prog_cxx_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 1680 "configure"
+#line 1682 "configure"
 #include "confdefs.h"
 
 int main(){return(0);}
 EOF
-if { (eval echo configure:1685: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1687: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cxx_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
     ac_cv_prog_cxx_cross=no
   else
     ac_cv_prog_cxx_cross=yes
   fi
 else
@@ -1702,31 +1704,31 @@ ac_compile='${CC-cc} -c $CFLAGS $CPPFLAG
 ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo "$ac_t""$ac_cv_prog_cxx_works" 1>&6
 if test $ac_cv_prog_cxx_works = no; then
   { echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1711: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1713: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6
 cross_compiling=$ac_cv_prog_cxx_cross
 
 echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6
-echo "configure:1716: checking whether we are using GNU C++" >&5
+echo "configure:1718: checking whether we are using GNU C++" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.C <<EOF
 #ifdef __GNUC__
   yes;
 #endif
 EOF
-if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1725: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1727: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gxx=yes
 else
   ac_cv_prog_gxx=no
 fi
 fi
 
 echo "$ac_t""$ac_cv_prog_gxx" 1>&6
 
@@ -1735,17 +1737,17 @@ if test $ac_cv_prog_gxx = yes; then
 else
   GXX=
 fi
 
 ac_test_CXXFLAGS="${CXXFLAGS+set}"
 ac_save_CXXFLAGS="$CXXFLAGS"
 CXXFLAGS=
 echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
-echo "configure:1744: checking whether ${CXX-g++} accepts -g" >&5
+echo "configure:1746: checking whether ${CXX-g++} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   echo 'void f(){}' > conftest.cc
 if test -z "`${CXX-g++} -g -c conftest.cc 2>&1`"; then
   ac_cv_prog_cxx_g=yes
 else
   ac_cv_prog_cxx_g=no
@@ -1780,17 +1782,17 @@ fi
         ;;
     esac
 
     for ac_prog in $RANLIB "${target_alias}-ranlib" "${target}-ranlib"
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1789: checking for $ac_word" >&5
+echo "configure:1791: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$RANLIB"; then
   ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -1815,17 +1817,17 @@ test -n "$RANLIB" && break
 done
 test -n "$RANLIB" || RANLIB="echo"
 
     for ac_prog in $AR "${target_alias}-ar" "${target}-ar"
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1824: checking for $ac_word" >&5
+echo "configure:1826: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$AR"; then
   ac_cv_prog_AR="$AR" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -1850,17 +1852,17 @@ test -n "$AR" && break
 done
 test -n "$AR" || AR="echo"
 
     for ac_prog in $AS "${target_alias}-as" "${target}-as"
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1859: checking for $ac_word" >&5
+echo "configure:1861: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$AS"; then
   ac_cv_prog_AS="$AS" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -1885,17 +1887,17 @@ test -n "$AS" && break
 done
 test -n "$AS" || AS="echo"
 
     for ac_prog in $LD "${target_alias}-ld" "${target}-ld"
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1894: checking for $ac_word" >&5
+echo "configure:1896: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$LD"; then
   ac_cv_prog_LD="$LD" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -1920,17 +1922,17 @@ test -n "$LD" && break
 done
 test -n "$LD" || LD="echo"
 
     for ac_prog in $STRIP "${target_alias}-strip" "${target}-strip"
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1929: checking for $ac_word" >&5
+echo "configure:1931: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$STRIP"; then
   ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -1955,17 +1957,17 @@ test -n "$STRIP" && break
 done
 test -n "$STRIP" || STRIP="echo"
 
     for ac_prog in $WINDRES "${target_alias}-windres" "${target}-windres"
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1964: checking for $ac_word" >&5
+echo "configure:1966: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$WINDRES"; then
   ac_cv_prog_WINDRES="$WINDRES" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -1990,17 +1992,17 @@ test -n "$WINDRES" && break
 done
 test -n "$WINDRES" || WINDRES="echo"
 
 
 else
     # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1999: checking for $ac_word" >&5
+echo "configure:2001: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -2020,17 +2022,17 @@ if test -n "$CC"; then
 else
   echo "$ac_t""no" 1>&6
 fi
 
 if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2029: checking for $ac_word" >&5
+echo "configure:2031: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_prog_rejected=no
@@ -2071,17 +2073,17 @@ else
 fi
 
   if test -z "$CC"; then
     case "`uname -s`" in
     *win32* | *WIN32*)
       # Extract the first word of "cl", so it can be a program name with args.
 set dummy cl; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2080: checking for $ac_word" >&5
+echo "configure:2082: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -2103,33 +2105,33 @@ else
 fi
  ;;
     esac
   fi
   test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:2112: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:2114: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
 ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
 cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 2123 "configure"
+#line 2125 "configure"
 #include "confdefs.h"
 
 main(){return(0);}
 EOF
-if { (eval echo configure:2128: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2130: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
     ac_cv_prog_cc_cross=no
   else
     ac_cv_prog_cc_cross=yes
   fi
 else
@@ -2145,31 +2147,31 @@ ac_compile='${CC-cc} -c $CFLAGS $CPPFLAG
 ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
 if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2154: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:2156: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:2159: checking whether we are using GNU C" >&5
+echo "configure:2161: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.c <<EOF
 #ifdef __GNUC__
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2168: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2170: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
 fi
 fi
 
 echo "$ac_t""$ac_cv_prog_gcc" 1>&6
 
@@ -2178,17 +2180,17 @@ if test $ac_cv_prog_gcc = yes; then
 else
   GCC=
 fi
 
 ac_test_CFLAGS="${CFLAGS+set}"
 ac_save_CFLAGS="$CFLAGS"
 CFLAGS=
 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2187: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:2189: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   echo 'void f(){}' > conftest.c
 if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
   ac_cv_prog_cc_g=yes
 else
   ac_cv_prog_cc_g=no
@@ -2218,17 +2220,17 @@ fi
         if test "$CC" = "cl" -a -z "$CXX"; then
             CXX=$CC
         else        
             for ac_prog in $CCC c++ g++ gcc CC cxx cc++ cl
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2227: checking for $ac_word" >&5
+echo "configure:2229: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CXX"; then
   ac_cv_prog_CXX="$CXX" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -2250,33 +2252,33 @@ else
 fi
 
 test -n "$CXX" && break
 done
 test -n "$CXX" || CXX="gcc"
 
 
 echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:2259: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
+echo "configure:2261: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
 
 ac_ext=C
 # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
 ac_cpp='$CXXCPP $CPPFLAGS'
 ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
 ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
 cross_compiling=$ac_cv_prog_cxx_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 2270 "configure"
+#line 2272 "configure"
 #include "confdefs.h"
 
 int main(){return(0);}
 EOF
-if { (eval echo configure:2275: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2277: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cxx_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
     ac_cv_prog_cxx_cross=no
   else
     ac_cv_prog_cxx_cross=yes
   fi
 else
@@ -2292,31 +2294,31 @@ ac_compile='${CC-cc} -c $CFLAGS $CPPFLAG
 ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo "$ac_t""$ac_cv_prog_cxx_works" 1>&6
 if test $ac_cv_prog_cxx_works = no; then
   { echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2301: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:2303: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6
 cross_compiling=$ac_cv_prog_cxx_cross
 
 echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6
-echo "configure:2306: checking whether we are using GNU C++" >&5
+echo "configure:2308: checking whether we are using GNU C++" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.C <<EOF
 #ifdef __GNUC__
   yes;
 #endif
 EOF
-if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:2315: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:2317: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gxx=yes
 else
   ac_cv_prog_gxx=no
 fi
 fi
 
 echo "$ac_t""$ac_cv_prog_gxx" 1>&6
 
@@ -2325,17 +2327,17 @@ if test $ac_cv_prog_gxx = yes; then
 else
   GXX=
 fi
 
 ac_test_CXXFLAGS="${CXXFLAGS+set}"
 ac_save_CXXFLAGS="$CXXFLAGS"
 CXXFLAGS=
 echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
-echo "configure:2334: checking whether ${CXX-g++} accepts -g" >&5
+echo "configure:2336: checking whether ${CXX-g++} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   echo 'void f(){}' > conftest.cc
 if test -z "`${CXX-g++} -g -c conftest.cc 2>&1`"; then
   ac_cv_prog_cxx_g=yes
 else
   ac_cv_prog_cxx_g=no
@@ -2359,72 +2361,72 @@ else
   else
     CXXFLAGS=
   fi
 fi
 
         fi
     fi
     echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:2368: checking how to run the C preprocessor" >&5
+echo "configure:2370: checking how to run the C preprocessor" >&5
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
 fi
 if test -z "$CPP"; then
 if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
     # This must be in double quotes, not single quotes, because CPP may get
   # substituted into the Makefile and "${CC-cc}" will confuse make.
   CPP="${CC-cc} -E"
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp.
   cat > conftest.$ac_ext <<EOF
-#line 2383 "configure"
+#line 2385 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2389: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2391: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
 else
   echo "$ac_err" >&5
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
   rm -rf conftest*
   CPP="${CC-cc} -E -traditional-cpp"
   cat > conftest.$ac_ext <<EOF
-#line 2400 "configure"
+#line 2402 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2406: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2408: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
 else
   echo "$ac_err" >&5
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
   rm -rf conftest*
   CPP="${CC-cc} -nologo -E"
   cat > conftest.$ac_ext <<EOF
-#line 2417 "configure"
+#line 2419 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2423: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2425: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
 else
   echo "$ac_err" >&5
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
   rm -rf conftest*
@@ -2441,17 +2443,17 @@ fi
 else
   ac_cv_prog_CPP="$CPP"
 fi
 echo "$ac_t""$CPP" 1>&6
 
     # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2450: checking for $ac_word" >&5
+echo "configure:2452: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$RANLIB"; then
   ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -2473,17 +2475,17 @@ else
   echo "$ac_t""no" 1>&6
 fi
 
     for ac_prog in as
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2482: checking for $ac_word" >&5
+echo "configure:2484: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$AS" in
   /*)
   ac_cv_path_AS="$AS" # Let the user override the test with a path.
   ;;
   ?:/*)			 
@@ -2514,17 +2516,17 @@ test -n "$AS" && break
 done
 test -n "$AS" || AS="$CC"
 
     for ac_prog in ar
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2523: checking for $ac_word" >&5
+echo "configure:2525: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$AR" in
   /*)
   ac_cv_path_AR="$AR" # Let the user override the test with a path.
   ;;
   ?:/*)			 
@@ -2555,17 +2557,17 @@ test -n "$AR" && break
 done
 test -n "$AR" || AR="echo not_ar"
 
     for ac_prog in ld link
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2564: checking for $ac_word" >&5
+echo "configure:2566: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$LD" in
   /*)
   ac_cv_path_LD="$LD" # Let the user override the test with a path.
   ;;
   ?:/*)			 
@@ -2596,17 +2598,17 @@ test -n "$LD" && break
 done
 test -n "$LD" || LD="echo not_ld"
 
     for ac_prog in strip
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2605: checking for $ac_word" >&5
+echo "configure:2607: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_STRIP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$STRIP" in
   /*)
   ac_cv_path_STRIP="$STRIP" # Let the user override the test with a path.
   ;;
   ?:/*)			 
@@ -2637,17 +2639,17 @@ test -n "$STRIP" && break
 done
 test -n "$STRIP" || STRIP="echo not_strip"
 
     for ac_prog in windres
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2646: checking for $ac_word" >&5
+echo "configure:2648: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$WINDRES" in
   /*)
   ac_cv_path_WINDRES="$WINDRES" # Let the user override the test with a path.
   ;;
   ?:/*)			 
@@ -2705,39 +2707,39 @@ esac
 
 if test "$cross_compiling"  = "yes"; then
     CROSS_COMPILE=1
 else
     CROSS_COMPILE=
 fi
 
 echo $ac_n "checking for gcc -pipe support""... $ac_c" 1>&6
-echo "configure:2714: checking for gcc -pipe support" >&5
+echo "configure:2716: checking for gcc -pipe support" >&5
 if test -n "$GNU_CC" && test -n "$GNU_CXX" && test -n "$GNU_AS"; then
     echo '#include <stdio.h>' > dummy-hello.c
     echo 'int main() { printf("Hello World\n"); return 0; }' >> dummy-hello.c
     ${CC} -S dummy-hello.c -o dummy-hello.s 2>&5
     cat dummy-hello.s | ${AS} -o dummy-hello.S - 2>&5
     if test $? = 0; then
         _res_as_stdin="yes"
     else
         _res_as_stdin="no"
     fi
     if test "$_res_as_stdin" = "yes"; then
         _SAVE_CFLAGS=$CFLAGS
         CFLAGS="$CFLAGS -pipe"
         cat > conftest.$ac_ext <<EOF
-#line 2729 "configure"
+#line 2731 "configure"
 #include "confdefs.h"
  #include <stdio.h> 
 int main() {
 printf("Hello World\n");
 ; return 0; }
 EOF
-if { (eval echo configure:2736: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2738: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   _res_gcc_pipe="yes"
 else
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
   rm -rf conftest*
   _res_gcc_pipe="no" 
 fi
@@ -2757,26 +2759,26 @@ else
     echo "$ac_t""no" 1>&6
 fi
 
 
 _SAVE_CFLAGS="$CFLAGS"
 CFLAGS="$CFLAGS -fprofile-generate -fprofile-correction"
 
 echo $ac_n "checking whether C compiler supports -fprofile-generate""... $ac_c" 1>&6
-echo "configure:2766: checking whether C compiler supports -fprofile-generate" >&5
+echo "configure:2768: checking whether C compiler supports -fprofile-generate" >&5
 cat > conftest.$ac_ext <<EOF
-#line 2768 "configure"
+#line 2770 "configure"
 #include "confdefs.h"
 
 int main() {
 return 0;
 ; return 0; }
 EOF
-if { (eval echo configure:2775: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2777: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
    PROFILE_GEN_CFLAGS="-fprofile-generate"
                  result="yes" 
 else
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
   rm -rf conftest*
   result="no"
@@ -2789,17 +2791,17 @@ if test $result = "yes"; then
    PROFILE_USE_CFLAGS="-fprofile-use -fprofile-correction -Wcoverage-mismatch -freorder-blocks-and-partition"
    PROFILE_USE_LDFLAGS="-fprofile-use"
 fi
 
 CFLAGS="$_SAVE_CFLAGS"
 
 if test "$GNU_CC"; then
     echo $ac_n "checking for visibility(hidden) attribute""... $ac_c" 1>&6
-echo "configure:2798: checking for visibility(hidden) attribute" >&5
+echo "configure:2800: checking for visibility(hidden) attribute" >&5
 if eval "test \"`echo '$''{'ac_cv_visibility_hidden'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.c <<EOF
         int foo __attribute__ ((visibility ("hidden"))) = 1;
 EOF
         ac_cv_visibility_hidden=no
         if ${CC-cc} -Werror -S conftest.c -o conftest.s >/dev/null 2>&1; then
@@ -2813,17 +2815,17 @@ fi
 
 echo "$ac_t""$ac_cv_visibility_hidden" 1>&6
     if test "$ac_cv_visibility_hidden" = "yes"; then
         cat >> confdefs.h <<\EOF
 #define HAVE_VISIBILITY_HIDDEN_ATTRIBUTE 1
 EOF
 
         echo $ac_n "checking for visibility pragma support""... $ac_c" 1>&6
-echo "configure:2822: checking for visibility pragma support" >&5
+echo "configure:2824: checking for visibility pragma support" >&5
 if eval "test \"`echo '$''{'ac_cv_visibility_pragma'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.c <<EOF
 #pragma GCC visibility push(hidden)
             int foo_hidden = 1;
 #pragma GCC visibility push(default)
             int foo_default = 1;
@@ -2866,17 +2868,17 @@ fi # GNU_CC
 fi # SKIP_COMPILER_CHECKS
 
 if test -z "$SKIP_PATH_CHECKS"; then
     for ac_prog in perl5 perl
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2875: checking for $ac_word" >&5
+echo "configure:2877: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_PERL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$PERL" in
   /*)
   ac_cv_path_PERL="$PERL" # Let the user override the test with a path.
   ;;
   ?:/*)			 
@@ -3142,27 +3144,27 @@ EOF
 
     cat >> confdefs.h <<\EOF
 #define SYSV 1
 EOF
 
     DSO_LDOPTS='-brtl -bnortllib -bM:SRE -bnoentry -bexpall -blibpath:/usr/lib:/lib'
     ac_safe=`echo "sys/atomic_op.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for sys/atomic_op.h""... $ac_c" 1>&6
-echo "configure:3151: checking for sys/atomic_op.h" >&5
+echo "configure:3153: checking for sys/atomic_op.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3156 "configure"
+#line 3158 "configure"
 #include "confdefs.h"
 #include <sys/atomic_op.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3161: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3163: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
   eval "ac_cv_header_$ac_safe=yes"
 else
   echo "$ac_err" >&5
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
@@ -3309,36 +3311,36 @@ EOF
     PR_MD_ARCH_DIR=beos
     RESOLVE_LINK_SYMBOLS=1
     case "${target_cpu}" in
     i*86)
         _OPTIMIZE_FLAGS=-O2
         _DEBUG_FLAGS='-gdwarf-2 -O0'
         MKSHLIB='$(CCC) $(DSO_LDOPTS) -o $@'
         echo $ac_n "checking for gethostbyaddr in -lbind""... $ac_c" 1>&6
-echo "configure:3318: checking for gethostbyaddr in -lbind" >&5
+echo "configure:3320: checking for gethostbyaddr in -lbind" >&5
 ac_lib_var=`echo bind'_'gethostbyaddr | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_save_LIBS="$LIBS"
 LIBS="-lbind  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 3326 "configure"
+#line 3328 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char gethostbyaddr();
 
 int main() {
 gethostbyaddr()
 ; return 0; }
 EOF
-if { (eval echo configure:3337: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3339: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=no"
 fi
@@ -4703,27 +4705,27 @@ EOF
     if test -z "$GNU_CC"; then
         CC="$CC -std1 -ieee_with_inexact"
         if test "$OS_RELEASE" != "V2.0"; then
             CC="$CC -readonly_strings"
         fi
         _OPTIMIZE_FLAGS="$_OPTIMIZE_FLAGS -Olimit 4000"
         ac_safe=`echo "machine/builtins.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for machine/builtins.h""... $ac_c" 1>&6
-echo "configure:4712: checking for machine/builtins.h" >&5
+echo "configure:4714: checking for machine/builtins.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4717 "configure"
+#line 4719 "configure"
 #include "confdefs.h"
 #include <machine/builtins.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4722: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4724: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
   eval "ac_cv_header_$ac_safe=yes"
 else
   echo "$ac_err" >&5
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
@@ -5362,63 +5364,63 @@ if test -z "$SKIP_LIBRARY_CHECKS"; then
 
 
 
 case $target in
 *-darwin*|*-beos*|*-os2*)
     ;;
 *)
     echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
-echo "configure:5371: checking for dlopen in -ldl" >&5
+echo "configure:5373: checking for dlopen in -ldl" >&5
 ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_save_LIBS="$LIBS"
 LIBS="-ldl  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 5379 "configure"
+#line 5381 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char dlopen();
 
 int main() {
 dlopen()
 ; return 0; }
 EOF
-if { (eval echo configure:5390: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5392: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=no"
 fi
 rm -f conftest*
 LIBS="$ac_save_LIBS"
 
 fi
 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
   echo "$ac_t""yes" 1>&6
   ac_safe=`echo "dlfcn.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for dlfcn.h""... $ac_c" 1>&6
-echo "configure:5407: checking for dlfcn.h" >&5
+echo "configure:5409: checking for dlfcn.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5412 "configure"
+#line 5414 "configure"
 #include "confdefs.h"
 #include <dlfcn.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5417: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5419: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
   eval "ac_cv_header_$ac_safe=yes"
 else
   echo "$ac_err" >&5
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
@@ -5441,23 +5443,23 @@ fi
     ;;
 esac
 
 
 
 
 if test $ac_cv_prog_gcc = yes; then
     echo $ac_n "checking whether ${CC-cc} needs -traditional""... $ac_c" 1>&6
-echo "configure:5450: checking whether ${CC-cc} needs -traditional" >&5
+echo "configure:5452: checking whether ${CC-cc} needs -traditional" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc_traditional'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
     ac_pattern="Autoconf.*'x'"
   cat > conftest.$ac_ext <<EOF
-#line 5456 "configure"
+#line 5458 "configure"
 #include "confdefs.h"
 #include <sgtty.h>
 Autoconf TIOCGETP
 EOF
 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
   egrep "$ac_pattern" >/dev/null 2>&1; then
   rm -rf conftest*
   ac_cv_prog_gcc_traditional=yes
@@ -5465,17 +5467,17 @@ else
   rm -rf conftest*
   ac_cv_prog_gcc_traditional=no
 fi
 rm -f conftest*
 
 
   if test $ac_cv_prog_gcc_traditional = no; then
     cat > conftest.$ac_ext <<EOF
-#line 5474 "configure"
+#line 5476 "configure"
 #include "confdefs.h"
 #include <termio.h>
 Autoconf TCGETA
 EOF
 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
   egrep "$ac_pattern" >/dev/null 2>&1; then
   rm -rf conftest*
   ac_cv_prog_gcc_traditional=yes
@@ -5489,22 +5491,22 @@ echo "$ac_t""$ac_cv_prog_gcc_traditional
   if test $ac_cv_prog_gcc_traditional = yes; then
     CC="$CC -traditional"
   fi
 fi
 
 for ac_func in lchown strerror
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5498: checking for $ac_func" >&5
+echo "configure:5500: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5503 "configure"
+#line 5505 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
 #include <assert.h>
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char $ac_func();
@@ -5517,17 +5519,17 @@ int main() {
 #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
 choke me
 #else
 $ac_func();
 #endif
 
 ; return 0; }
 EOF
-if { (eval echo configure:5526: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5528: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=no"
 fi
@@ -5558,17 +5560,17 @@ if test "${enable_strip+set}" = set; the
 fi
 
 
 case "${target_os}" in
 hpux*)
 if test -z "$GNU_CC"; then
 
     echo $ac_n "checking for +Olit support""... $ac_c" 1>&6
-echo "configure:5567: checking for +Olit support" >&5
+echo "configure:5569: checking for +Olit support" >&5
 if eval "test \"`echo '$''{'ac_cv_hpux_usable_olit_option'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
                   ac_cv_hpux_usable_olit_option=no
         rm -f conftest*
         echo 'int main() { return 0; }' | cat > conftest.c
         ${CC-cc} ${CFLAGS} +Olit=all -o conftest conftest.c > conftest.out 2>&1
         if test $? -eq 0; then
@@ -5600,17 +5602,17 @@ darwin*)
     _HAVE_PTHREADS=1
     ;;
 wince*)
     _HAVE_PTHREADS=
     ;;
 *)
     
 echo $ac_n "checking for pthread_create in -lpthreads""... $ac_c" 1>&6
-echo "configure:5609: checking for pthread_create in -lpthreads" >&5
+echo "configure:5611: checking for pthread_create in -lpthreads" >&5
 echo "
     #include <pthread.h> 
     void *foo(void *v) { return v; } 
     int main() { 
         pthread_t t;
         if (!pthread_create(&t, 0, &foo, 0)) {
             pthread_join(t, 0);
         }
@@ -5622,17 +5624,17 @@ echo "
     rm -f dummy.c dummy${ac_exeext} ;
     if test "$_res" = "0"; then
         echo "$ac_t""yes" 1>&6
         _HAVE_PTHREADS=1 _PTHREAD_LDFLAGS="-lpthreads"
     else
         echo "$ac_t""no" 1>&6
         
 echo $ac_n "checking for pthread_create in -lpthread""... $ac_c" 1>&6
-echo "configure:5631: checking for pthread_create in -lpthread" >&5
+echo "configure:5633: checking for pthread_create in -lpthread" >&5
 echo "
     #include <pthread.h> 
     void *foo(void *v) { return v; } 
     int main() { 
         pthread_t t;
         if (!pthread_create(&t, 0, &foo, 0)) {
             pthread_join(t, 0);
         }
@@ -5644,17 +5646,17 @@ echo "
     rm -f dummy.c dummy${ac_exeext} ;
     if test "$_res" = "0"; then
         echo "$ac_t""yes" 1>&6
         _HAVE_PTHREADS=1 _PTHREAD_LDFLAGS="-lpthread"
     else
         echo "$ac_t""no" 1>&6
         
 echo $ac_n "checking for pthread_create in -lc_r""... $ac_c" 1>&6
-echo "configure:5653: checking for pthread_create in -lc_r" >&5
+echo "configure:5655: checking for pthread_create in -lc_r" >&5
 echo "
     #include <pthread.h> 
     void *foo(void *v) { return v; } 
     int main() { 
         pthread_t t;
         if (!pthread_create(&t, 0, &foo, 0)) {
             pthread_join(t, 0);
         }
@@ -5666,17 +5668,17 @@ echo "
     rm -f dummy.c dummy${ac_exeext} ;
     if test "$_res" = "0"; then
         echo "$ac_t""yes" 1>&6
         _HAVE_PTHREADS=1 _PTHREAD_LDFLAGS="-lc_r"
     else
         echo "$ac_t""no" 1>&6
         
 echo $ac_n "checking for pthread_create in -lc""... $ac_c" 1>&6
-echo "configure:5675: checking for pthread_create in -lc" >&5
+echo "configure:5677: checking for pthread_create in -lc" >&5
 echo "
     #include <pthread.h> 
     void *foo(void *v) { return v; } 
     int main() { 
         pthread_t t;
         if (!pthread_create(&t, 0, &foo, 0)) {
             pthread_join(t, 0);
         }
@@ -5798,17 +5800,17 @@ EOF
     fi
 fi
 
 
 if test -n "$USE_PTHREADS"; then
       rm -f conftest*
    ac_cv_have_dash_pthread=no
    echo $ac_n "checking whether ${CC-cc} accepts -pthread""... $ac_c" 1>&6
-echo "configure:5807: checking whether ${CC-cc} accepts -pthread" >&5
+echo "configure:5809: checking whether ${CC-cc} accepts -pthread" >&5
    echo 'int main() { return 0; }' | cat > conftest.c
    ${CC-cc} -pthread -o conftest conftest.c > conftest.out 2>&1
    if test $? -eq 0; then
 	if test -z "`egrep -i '(unrecognize|unknown)' conftest.out | grep pthread`" && test -z "`egrep -i '(error|incorrect)' conftest.out`" ; then
 	    ac_cv_have_dash_pthread=yes
 		case "$target_os" in
 	    freebsd*)
 # Freebsd doesn't use -pthread for compiles, it uses them for linking
@@ -5821,17 +5823,17 @@ echo "configure:5807: checking whether $
 	fi
     fi
     rm -f conftest*
     echo "$ac_t""$ac_cv_have_dash_pthread" 1>&6
 
 			    ac_cv_have_dash_pthreads=no
     if test "$ac_cv_have_dash_pthread" = "no"; then
 	    echo $ac_n "checking whether ${CC-cc} accepts -pthreads""... $ac_c" 1>&6
-echo "configure:5830: checking whether ${CC-cc} accepts -pthreads" >&5
+echo "configure:5832: checking whether ${CC-cc} accepts -pthreads" >&5
     	echo 'int main() { return 0; }' | cat > conftest.c
 	    ${CC-cc} -pthreads -o conftest conftest.c > conftest.out 2>&1
     	if test $? -eq 0; then
 	    	if test -z "`egrep -i '(unrecognize|unknown)' conftest.out | grep pthreads`" && test -z "`egrep -i '(error|incorrect)' conftest.out`" ; then
 			    ac_cv_have_dash_pthreads=yes
 			    CFLAGS="$CFLAGS -pthreads"
 			    CXXFLAGS="$CXXFLAGS -pthreads"
 		    fi

--- a/nsprpub/configure.in
+++ b/nsprpub/configure.in
@@ -269,31 +269,33 @@ AC_ARG_ENABLE(debug,
           MOZ_DEBUG_SYMBOLS=1
           if test -n "$enableval" -a "$enableval" != "yes"; then
               _DEBUG_FLAGS=`echo $enableval | sed -e 's|\\\ | |g'`
               _SAVE_DEBUG_FLAGS=$_DEBUG_FLAGS
           fi
       else
           MOZ_DEBUG=
       fi ],
-      MOZ_DEBUG=)
+      MOZ_DEBUG_SYMBOLS=1)
 
 AC_ARG_ENABLE(debug-symbols,
     [  --enable-debug-symbols[=DBG]    Enable debugging symbols
                                        (using compiler flags DBG)],
     [ if test "$enableval" != "no"; then
           MOZ_DEBUG_SYMBOLS=1
           if test -n "$enableval" -a "$enableval" != "yes"; then
               if test -z "$_SAVE_DEBUG_FLAGS"; then
                   _DEBUG_FLAGS=`echo $enableval | sed -e 's|\\\ | |g'`
                   _SAVE_DEBUG_FLAGS=$_DEBUG_FLAGS
               else
                   AC_MSG_ERROR([--enable-debug-symbols flags cannot be used with --enable-debug flags])
               fi
           fi
+      else
+          MOZ_DEBUG_SYMBOLS=
       fi ])
 
 AC_ARG_ENABLE(win32-target,
     [  --enable-win32-target=\$t
                           Specify win32 flavor. (WIN95 or WINNT)],
     OS_TARGET=`echo $enableval | tr a-z A-Z`)
 
 AC_ARG_ENABLE(symbian-target,

--- a/nsprpub/pr/include/prinit.h
+++ b/nsprpub/pr/include/prinit.h
@@ -58,17 +58,17 @@ PR_BEGIN_EXTERN_C
 /*
 ** NSPR's version is used to determine the likelihood that the version you
 ** used to build your component is anywhere close to being compatible with
 ** what is in the underlying library.
 **
 ** The format of the version string is
 **     "<major version>.<minor version>[.<patch level>] [<Beta>]"
 */
-#define PR_VERSION  "4.8.6 Beta"
+#define PR_VERSION  "4.8.6 Beta 2"
 #define PR_VMAJOR   4
 #define PR_VMINOR   8
 #define PR_VPATCH   6
 #define PR_BETA     PR_TRUE
 
 /*
 ** PRVersionCheck
 **

--- a/nsprpub/pr/include/prlink.h
+++ b/nsprpub/pr/include/prlink.h
@@ -44,17 +44,17 @@
 #include "prtypes.h"
 
 PR_BEGIN_EXTERN_C
 
 typedef struct PRLibrary PRLibrary;
 
 typedef struct PRStaticLinkTable {
     const char *name;
-    void (*fp)();
+    void (*fp)(void);
 } PRStaticLinkTable;
 
 /*
 ** Change the default library path to the given string. The string is
 ** copied. This call will fail if it runs out of memory.
 **
 ** The string provided as 'path' is copied. The caller can do whatever is
 ** convenient with the argument when the function is complete.
@@ -203,17 +203,17 @@ NSPR_API(void*) PR_FindSymbol(PRLibrary 
 /*
 ** Similar to PR_FindSymbol, except that the return value is a pointer to
 ** a function, and not a pointer to void. Casting between a data pointer
 ** and a function pointer is not portable according to the C standard.
 ** Any function pointer can be cast to any other function pointer.
 **
 ** This function does not modify the reference count of the library.
 */
-typedef void (*PRFuncPtr)();
+typedef void (*PRFuncPtr)(void);
 NSPR_API(PRFuncPtr) PR_FindFunctionSymbol(PRLibrary *lib, const char *name);
 
 /*
 ** Finds a symbol in one of the currently loaded libraries. Given the
 ** name of a procedure, return the address of the function that
 ** implements the procedure, and return the library that contains that
 ** symbol, or NULL if no such function can be found. This does not find
 ** symbols in the main program (the ".exe"); use PR_AddStaticLibrary to

--- a/nsprpub/pr/src/md/windows/Makefile.in
+++ b/nsprpub/pr/src/md/windows/Makefile.in
@@ -88,17 +88,17 @@ INCLUDES = -I$(dist_includedir) -I$(tops
 
 DEFINES += -D_NSPR_BUILD_
 
 include $(topsrcdir)/config/rules.mk
 
 export:: $(TARGETS)
 
 # Bug 122433 workaround: disable global optimization (-Og-) on ntio.c.
-ifdef BUILD_OPT
+ifdef MOZ_OPTIMIZE
 ifeq ($(OS_TARGET), WINNT)
 ifndef NS_USE_GCC
 $(OBJDIR)/ntio.$(OBJ_SUFFIX): ntio.c
 	@$(MAKE_OBJDIR)
 	$(CC) -Fo$@ -c $(CFLAGS) -Og- $<
 endif
 endif
 endif

--- a/nsprpub/pr/src/misc/dtoa.c
+++ b/nsprpub/pr/src/misc/dtoa.c
@@ -2473,16 +2473,19 @@ strtod
 	BCinfo bc;
 	Bigint *bb, *bb1, *bd, *bd0, *bs, *delta;
 #ifdef Avoid_Underflow
 	ULong Lsb, Lsb1;
 #endif
 #ifdef SET_INEXACT
 	int oldinexact;
 #endif
+#ifndef NO_STRTOD_BIGCOMP
+	int req_bigcomp = 0;
+#endif
 #ifdef Honor_FLT_ROUNDS /*{*/
 #ifdef Trust_FLT_ROUNDS /*{{ only define this if FLT_ROUNDS really works! */
 	bc.rounding = Flt_Rounds;
 #else /*}{*/
 	bc.rounding = 1;
 	switch(fegetround()) {
 	  case FE_TOWARDZERO:	bc.rounding = 0; break;
 	  case FE_UPWARD:	bc.rounding = 2; break;
@@ -3026,22 +3029,27 @@ strtod
 		if (bs2 > 0)
 			bs = lshift(bs, bs2);
 		delta = diff(bb, bd);
 		bc.dsign = delta->sign;
 		delta->sign = 0;
 		i = cmp(delta, bs);
 #ifndef NO_STRTOD_BIGCOMP /*{*/
 		if (bc.nd > nd && i <= 0) {
-			if (bc.dsign)
-				break;	/* Must use bigcomp(). */
+			if (bc.dsign) {
+				/* Must use bigcomp(). */
+				req_bigcomp = 1;
+				break;
+				}
 #ifdef Honor_FLT_ROUNDS
 			if (bc.rounding != 1) {
-				if (i < 0)
+				if (i < 0) {
+					req_bigcomp = 1;
 					break;
+					}
 				}
 			else
 #endif
 				i = -1;	/* Discarded digits make delta smaller. */
 			}
 #endif /*}*/
 #ifdef Honor_FLT_ROUNDS /*{*/
 		if (bc.rounding != 1) {
@@ -3460,17 +3468,17 @@ strtod
 		Bfree(delta);
 		}
 	Bfree(bb);
 	Bfree(bd);
 	Bfree(bs);
 	Bfree(bd0);
 	Bfree(delta);
 #ifndef NO_STRTOD_BIGCOMP
-	if (bc.nd > nd && bc.dsign) {
+	if (req_bigcomp) {
 		bd0 = 0;
 		bc.e0 += nz1;
 		bigcomp(&rv, s0, &bc);
 		y = word0(&rv) & Exp_mask;
 		if (y == Exp_mask)
 			goto ovfl;
 		if (y == 0 && rv.d == 0.)
 			goto undfl;