author L. David Baron <>
Sat, 13 Sep 2014 06:17:36 -0700
changeset 228423 c81eb3a1336b2ab5f4e83b8b5df394dfea8be37e
parent 223560 feca845bb857e5ea6752fe6f22f710c00b826a46
child 235464 241c23570a6271abe1c3dd908d06a06dd9b66f30
permissions -rw-r--r--
Bug 977991 patch 1 - Expose variant of RulesMatching on nsHTMLCSSStyleSheet that is less work to call. r=birtles This allows nsStyleSet::RuleNodeWithReplacement to call it without constructing an entire (and unnecessary) ElementRuleProcessorData, which will happen in patch 3.

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
// vim:cindent:ts=2:et:sw=2:
/* This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at */

/* class that a parent frame uses to reflow a block frame */

#include "nsBlockReflowContext.h"
#include "nsBlockReflowState.h"
#include "nsFloatManager.h"
#include "nsColumnSetFrame.h"
#include "nsContainerFrame.h"
#include "nsBlockFrame.h"
#include "nsLineBox.h"
#include "nsLayoutUtils.h"

using namespace mozilla;

#ifdef DEBUG

nsBlockReflowContext::nsBlockReflowContext(nsPresContext* aPresContext,
                                           const nsHTMLReflowState& aParentRS)
  : mPresContext(aPresContext),

static nsIFrame* DescendIntoBlockLevelFrame(nsIFrame* aFrame)
  nsIAtom* type = aFrame->GetType();
  if (type == nsGkAtoms::columnSetFrame) {
    nsIFrame* child = aFrame->GetFirstPrincipalChild();
    if (child) {
      return DescendIntoBlockLevelFrame(child);
  return aFrame;

nsBlockReflowContext::ComputeCollapsedBStartMargin(const nsHTMLReflowState& aRS,
                                                   nsCollapsingMargin* aMargin,
                                                   nsIFrame* aClearanceFrame,
                                                   bool* aMayNeedRetry,
                                                   bool* aBlockIsEmpty)
  WritingMode wm = aRS.GetWritingMode();
  // Include frame's block-start margin

  // The inclusion of the block-end margin when empty is done by the caller
  // since it doesn't need to be done by the top-level (non-recursive)
  // caller.

  nsFrame::ListTag(stdout, aRS.frame);
  printf(": %d => %d\n", aRS.ComputedLogicalMargin().BStart(wm), aMargin->get());

  bool dirtiedLine = false;
  bool setBlockIsEmpty = false;

  // Calculate the frame's generational block-start-margin from its child
  // blocks. Note that if the frame has a non-zero block-start-border or
  // block-start-padding then this step is skipped because it will be a margin
  // root.  It is also skipped if the frame is a margin root for other
  // reasons.
  nsIFrame* frame = DescendIntoBlockLevelFrame(aRS.frame);
  nsPresContext* prescontext = frame->PresContext();
  nsBlockFrame* block = nullptr;
  if (0 == aRS.ComputedLogicalBorderPadding().BStart(wm)) {
    block = nsLayoutUtils::GetAsBlock(frame);
    if (block) {
      bool bStartMarginRoot, unused;
      block->IsMarginRoot(&bStartMarginRoot, &unused);
      if (bStartMarginRoot) {
        block = nullptr;

  // iterate not just through the lines of 'block' but also its
  // overflow lines and the normal and overflow lines of its next in
  // flows. Note that this will traverse some frames more than once:
  // for example, if A contains B and A->nextinflow contains
  // B->nextinflow, we'll traverse B->nextinflow twice. But this is
  // OK because our traversal is idempotent.
  for ( ;block; block = static_cast<nsBlockFrame*>(block->GetNextInFlow())) {
    for (int overflowLines = 0; overflowLines <= 1; ++overflowLines) {
      nsBlockFrame::line_iterator line;
      nsBlockFrame::line_iterator line_end;
      bool anyLines = true;
      if (overflowLines) {
        nsBlockFrame::FrameLines* frames = block->GetOverflowLines();
        nsLineList* lines = frames ? &frames->mLines : nullptr;
        if (!lines) {
          anyLines = false;
        } else {
          line = lines->begin();
          line_end = lines->end();
      } else {
        line = block->begin_lines();
        line_end = block->end_lines();
      for (; anyLines && line != line_end; ++line) {
        if (!aClearanceFrame && line->HasClearance()) {
          // If we don't have a clearance frame, then we're computing
          // the collapsed margin in the first pass, assuming that all
          // lines have no clearance. So clear their clearance flags.
          dirtiedLine = true;

        bool isEmpty;
        if (line->IsInline()) {
          isEmpty = line->IsEmpty();
        } else {
          nsIFrame* kid = line->mFirstChild;
          if (kid == aClearanceFrame) {
            dirtiedLine = true;
            goto done;
          // Here is where we recur. Now that we have determined that a
          // generational collapse is required we need to compute the
          // child blocks margin and so in so that we can look into
          // it. For its margins to be computed we need to have a reflow
          // state for it.

          // We may have to construct an extra reflow state here if
          // we drilled down through a block wrapper. At the moment
          // we can only drill down one level so we only have to support
          // one extra reflow state.
          const nsHTMLReflowState* outerReflowState = &aRS;
          if (frame != aRS.frame) {
            NS_ASSERTION(frame->GetParent() == aRS.frame,
                         "Can only drill through one level of block wrapper");
            LogicalSize availSpace = aRS.ComputedSize(frame->GetWritingMode());
            outerReflowState = new nsHTMLReflowState(prescontext,
                                                     aRS, frame, availSpace);
            LogicalSize availSpace =
            nsHTMLReflowState innerReflowState(prescontext,
                                               *outerReflowState, kid,
            // Record that we're being optimistic by assuming the kid
            // has no clearance
            if (kid->StyleDisplay()->mBreakType != NS_STYLE_CLEAR_NONE) {
              *aMayNeedRetry = true;
            if (ComputeCollapsedBStartMargin(innerReflowState, aMargin,
                                             aClearanceFrame, aMayNeedRetry,
                                             &isEmpty)) {
              dirtiedLine = true;
            if (isEmpty) {
              WritingMode innerWM = innerReflowState.GetWritingMode();
              LogicalMargin innerMargin =
                innerReflowState.ComputedLogicalMargin().ConvertTo(wm, innerWM);
          if (outerReflowState != &aRS) {
            delete const_cast<nsHTMLReflowState*>(outerReflowState);
        if (!isEmpty) {
          if (!setBlockIsEmpty && aBlockIsEmpty) {
            setBlockIsEmpty = true;
            *aBlockIsEmpty = false;
          goto done;
      if (!setBlockIsEmpty && aBlockIsEmpty) {
        // The first time we reach here is when this is the first block
        // and we have processed all its normal lines.
        setBlockIsEmpty = true;
        // All lines are empty, or we wouldn't be here!
        *aBlockIsEmpty = aRS.frame->IsSelfEmpty();

  if (!setBlockIsEmpty && aBlockIsEmpty) {
    *aBlockIsEmpty = aRS.frame->IsEmpty();
  nsFrame::ListTag(stdout, aRS.frame);
  printf(": => %d\n", aMargin->get());

  return dirtiedLine;

nsBlockReflowContext::ReflowBlock(const nsRect&       aSpace,
                                  bool                aApplyBStartMargin,
                                  nsCollapsingMargin& aPrevMargin,
                                  nscoord             aClearance,
                                  bool                aIsAdjacentWithBStart,
                                  nsLineBox*          aLine,
                                  nsHTMLReflowState&  aFrameRS,
                                  nsReflowStatus&     aFrameReflowStatus,
                                  nsBlockReflowState& aState)
  mFrame = aFrameRS.frame;
  mWritingMode = aState.mReflowState.GetWritingMode();
  mContainerWidth = aState.mContainerWidth;
  mSpace = LogicalRect(mWritingMode, aSpace, mContainerWidth);

  if (!aIsAdjacentWithBStart) {
    aFrameRS.mFlags.mIsTopOfPage = false;  // make sure this is cleared

  if (aApplyBStartMargin) {
    mBStartMargin = aPrevMargin;

    nsFrame::ListTag(stdout, mOuterReflowState.frame);
    printf(": reflowing ");
    nsFrame::ListTag(stdout, mFrame);
    printf(" margin => %d, clearance => %d\n", mBStartMargin.get(), aClearance);

    // Adjust the available block size if it's constrained so that the
    // child frame doesn't think it can reflow into its margin area.
    if (NS_UNCONSTRAINEDSIZE != aFrameRS.AvailableBSize()) {
      aFrameRS.AvailableBSize() -= mBStartMargin.get() + aClearance;

  nscoord tI = 0, tB = 0;
  // The values of x and y do not matter for floats, so don't bother
  // calculating them. Floats are guaranteed to have their own float
  // manager, so tI and tB don't matter.  mICoord and mBCoord don't
  // matter becacuse they are only used in PlaceBlock, which is not used
  // for floats.
  if (aLine) {
    // Compute inline/block coordinate where reflow will begin. Use the
    // rules from 10.3.3 to determine what to apply. At this point in the
    // reflow auto inline-start/end margins will have a zero value.

    WritingMode frameWM = aFrameRS.GetWritingMode();
    mICoord = tI =
      mSpace.IStart(mWritingMode) +
    mBCoord = tB = mSpace.BStart(mWritingMode) +
                   mBStartMargin.get() + aClearance;

    //XXX temporary until nsFloatManager is logicalized
    tI = aSpace.x + aFrameRS.ComputedPhysicalMargin().left;
    tB = aSpace.y + mBStartMargin.get() + aClearance;

    if ((mFrame->GetStateBits() & NS_BLOCK_FLOAT_MGR) == 0)
      aFrameRS.mBlockDelta =
        mOuterReflowState.mBlockDelta + mBCoord - aLine->BStart();

  // Let frame know that we are reflowing it

#ifdef DEBUG
  mMetrics.ISize(mWritingMode) = nscoord(0xdeadbeef);
  mMetrics.BSize(mWritingMode) = nscoord(0xdeadbeef);

  mOuterReflowState.mFloatManager->Translate(tI, tB);
  mFrame->Reflow(mPresContext, mMetrics, aFrameRS, aFrameReflowStatus);
  mOuterReflowState.mFloatManager->Translate(-tI, -tB);

#ifdef DEBUG
  if (!NS_INLINE_IS_BREAK_BEFORE(aFrameReflowStatus)) {
    if (CRAZY_SIZE(mMetrics.ISize(mWritingMode)) ||
        CRAZY_SIZE(mMetrics.BSize(mWritingMode))) {
      printf("nsBlockReflowContext: ");
      nsFrame::ListTag(stdout, mFrame);
      printf(" metrics=%d,%d!\n",
             mMetrics.ISize(mWritingMode), mMetrics.BSize(mWritingMode));
    if ((mMetrics.ISize(mWritingMode) == nscoord(0xdeadbeef)) ||
        (mMetrics.BSize(mWritingMode) == nscoord(0xdeadbeef))) {
      printf("nsBlockReflowContext: ");
      nsFrame::ListTag(stdout, mFrame);
      printf(" didn't set i/b %d,%d!\n",
             mMetrics.ISize(mWritingMode), mMetrics.BSize(mWritingMode));

  if (!mFrame->HasOverflowAreas()) {

  if (!NS_INLINE_IS_BREAK_BEFORE(aFrameReflowStatus) ||
      (mFrame->GetStateBits() & NS_FRAME_OUT_OF_FLOW)) {
    // If frame is complete and has a next-in-flow, we need to delete
    // them now. Do not do this when a break-before is signaled because
    // the frame is going to get reflowed again (and may end up wanting
    // a next-in-flow where it ends up), unless it is an out of flow frame.
    if (NS_FRAME_IS_FULLY_COMPLETE(aFrameReflowStatus)) {
      nsIFrame* kidNextInFlow = mFrame->GetNextInFlow();
      if (nullptr != kidNextInFlow) {
        // Remove all of the childs next-in-flows. Make sure that we ask
        // the right parent to do the removal (it's possible that the
        // parent is not this because we are executing pullup code).
        // Floats will eventually be removed via nsBlockFrame::RemoveFloat
        // which detaches the placeholder from the float.
        nsOverflowContinuationTracker::AutoFinish fini(aState.mOverflowTracker, mFrame);
        kidNextInFlow->GetParent()->DeleteNextInFlowChild(kidNextInFlow, true);

 * Attempt to place the block frame within the available space.  If
 * it fits, apply inline-dir ("horizontal") positioning (CSS 10.3.3),
 * collapse margins (CSS2 8.3.1). Also apply relative positioning.
nsBlockReflowContext::PlaceBlock(const nsHTMLReflowState&  aReflowState,
                                 bool                      aForceFit,
                                 nsLineBox*                aLine,
                                 nsCollapsingMargin&       aBEndMarginResult,
                                 nsOverflowAreas&          aOverflowAreas,
                                 nsReflowStatus            aReflowStatus)
  // Compute collapsed block-end margin value.
  WritingMode wm = aReflowState.GetWritingMode();
  WritingMode parentWM = mMetrics.GetWritingMode();
  if (NS_FRAME_IS_COMPLETE(aReflowStatus)) {
    aBEndMarginResult = mMetrics.mCarriedOutBottomMargin;
  } else {
    // The used bottom-margin is set to zero above a break.

  nscoord backupContainingBlockAdvance = 0;

  // Check whether the block's block-end margin collapses with its block-start
  // margin. See CSS 2.1 section 8.3.1; those rules seem to match
  // nsBlockFrame::IsEmpty(). Any such block must have zero block-size so
  // check that first. Note that a block can have clearance and still
  // have adjoining block-start/end margins, because the clearance goes
  // above the block-start margin.
  // Mark the frame as non-dirty; it has been reflowed (or we wouldn't
  // be here), and we don't want to assert in CachedIsEmpty()
  bool empty = 0 == mMetrics.BSize(parentWM) && aLine->CachedIsEmpty();
  if (empty) {
    // Collapse the block-end margin with the block-start margin that was
    // already applied.

    printf("  ");
    nsFrame::ListTag(stdout, mOuterReflowState.frame);
    printf(": ");
    nsFrame::ListTag(stdout, mFrame);
    printf(" -- collapsing block start & end margin together; BStart=%d spaceBStart=%d\n",
           mBCoord, mSpace.BStart(mWritingMode));
    // Section 8.3.1 of CSS 2.1 says that blocks with adjoining
    // "top/bottom" (i.e. block-start/end) margins whose top margin collapses
    // with their parent's top margin should have their top border-edge at the
    // top border-edge of their parent. We actually don't have to do
    // anything special to make this happen. In that situation,
    // nsBlockFrame::ShouldApplyBStartMargin will have returned false,
    // and mBStartMargin and aClearance will have been zero in
    // ReflowBlock.

    // If we did apply our block-start margin, but now we're collapsing it
    // into the block-end margin, we need to back up the containing
    // block's bCoord-advance by our block-start margin so that it doesn't get
    // counted twice. Note that here we're allowing the line's bounds
    // to become different from the block's position; we do this
    // because the containing block will place the next line at the
    // line's BEnd, and it must place the next line at a different
    // point from where this empty block will be.
    backupContainingBlockAdvance = mBStartMargin.get();

  // See if the frame fit. If it's the first frame or empty then it
  // always fits. If the block-size is unconstrained then it always fits,
  // even if there's some sort of integer overflow that makes bCoord +
  // mMetrics.BSize() appear to go beyond the available height.
  if (!empty && !aForceFit &&
      mSpace.BSize(mWritingMode) != NS_UNCONSTRAINEDSIZE) {
    nscoord bEnd = mBCoord -
                   backupContainingBlockAdvance + mMetrics.BSize(mWritingMode);
    if (bEnd > mSpace.BEnd(mWritingMode)) {
      // didn't fit, we must acquit.
      mFrame->DidReflow(mPresContext, &aReflowState,
      return false;

                   mICoord, mBCoord - backupContainingBlockAdvance,
                   mMetrics.ISize(mWritingMode), mMetrics.BSize(mWritingMode),

  // XXX temporary until other classes are logicalized
  nsPoint position = LogicalRect(mWritingMode,
                                 mICoord, mBCoord,
                       GetPhysicalPosition(mWritingMode, mContainerWidth);


  // Now place the frame and complete the reflow process
  nsContainerFrame::FinishReflowChild(mFrame, mPresContext, mMetrics,
                                      &aReflowState, position.x, position.y, 0);

  aOverflowAreas = mMetrics.mOverflowAreas + position;

  return true;