author Alastor Wu <>
Mon, 04 Mar 2019 17:25:52 +0000
changeset 520123 6e3eb5df50ff8607f0f60e8f7f8b9ed573f74fa4
parent 519921 45807d96ca7f5378567115595b98db0d2f3cd0bc
child 520916 21bafd01b4389ff72d26f78f28079a6585708b4c
permissions -rw-r--r--
Bug 1526355 - part1 : notify the front end side to show the blocking icon if the site is still being blocked after it's back from the bfcache. r=cpearce In order to display blocking icon when the document comes back from the bfcache, we have to notify front end what's the current blocking status. As the front end side would clear blocking autoplay information when nagivation occurs, and the media might not invoke the play again when they comes back from the bfcache. Therefore, we should notify front end side that the site is still being blocked, and we should show blocking icon for it. Differential Revision:

/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* vim: set ts=8 sts=2 et sw=2 tw=80: */
/* This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at */
#ifndef mozilla_dom_HTMLMediaElement_h
#define mozilla_dom_HTMLMediaElement_h

#include "nsAutoPtr.h"
#include "nsGenericHTMLElement.h"
#include "MediaEventSource.h"
#include "SeekTarget.h"
#include "MediaDecoderOwner.h"
#include "MediaPromiseDefs.h"
#include "nsCycleCollectionParticipant.h"
#include "nsIObserver.h"
#include "mozilla/CORSMode.h"
#include "DecoderTraits.h"
#include "nsIAudioChannelAgent.h"
#include "mozilla/Attributes.h"
#include "mozilla/dom/TextTrackManager.h"
#include "mozilla/WeakPtr.h"
#include "mozilla/dom/MediaKeys.h"
#include "mozilla/StateWatching.h"
#include "nsGkAtoms.h"
#include "PrincipalChangeObserver.h"
#include "nsStubMutationObserver.h"
#include "MediaSegment.h"  // for PrincipalHandle, GraphTime

// X.h on Linux #defines CurrentTime as 0L, so we have to #undef it here.
#ifdef CurrentTime
#  undef CurrentTime

#include "mozilla/dom/HTMLMediaElementBinding.h"

// Define to output information on decoding and painting framerate
/* #define DEBUG_FRAME_RATE 1 */

typedef uint16_t nsMediaNetworkState;
typedef uint16_t nsMediaReadyState;
typedef uint32_t SuspendTypes;
typedef uint32_t AudibleChangedReasons;
typedef uint8_t AudibleState;

namespace mozilla {
class AbstractThread;
class ChannelMediaDecoder;
class DecoderDoctorDiagnostics;
class DOMMediaStream;
class ErrorResult;
class MediaResource;
class MediaDecoder;
class MediaInputPort;
class MediaStream;
class MediaStreamGraph;
class VideoFrameContainer;
namespace dom {
class MediaKeys;
class TextTrack;
class TimeRanges;
class WakeLock;
class MediaTrack;
class MediaStreamTrack;
class VideoStreamTrack;
}  // namespace dom
}  // namespace mozilla

class AudioDeviceInfo;
class nsIChannel;
class nsIHttpChannel;
class nsILoadGroup;
class nsIRunnable;
class nsISerialEventTarget;
class nsITimer;
class nsRange;

namespace mozilla {
namespace dom {

// Number of milliseconds between timeupdate events as defined by spec
#define TIMEUPDATE_MS 250

class MediaError;
class MediaSource;
class PlayPromise;
class Promise;
class TextTrackList;
class AudioTrackList;
class VideoTrackList;

enum class StreamCaptureType : uint8_t { CAPTURE_ALL_TRACKS, CAPTURE_AUDIO };

enum class StreamCaptureBehavior : uint8_t {

class HTMLMediaElement : public nsGenericHTMLElement,
                         public MediaDecoderOwner,
                         public PrincipalChangeObserver<DOMMediaStream>,
                         public SupportsWeakPtr<HTMLMediaElement>,
                         public nsStubMutationObserver {
  typedef mozilla::TimeStamp TimeStamp;
  typedef mozilla::layers::ImageContainer ImageContainer;
  typedef mozilla::VideoFrameContainer VideoFrameContainer;
  typedef mozilla::MediaStream MediaStream;
  typedef mozilla::MediaResource MediaResource;
  typedef mozilla::MediaDecoderOwner MediaDecoderOwner;
  typedef mozilla::MetadataTags MetadataTags;


  CORSMode GetCORSMode() { return mCORSMode; }

  explicit HTMLMediaElement(
      already_AddRefed<mozilla::dom::NodeInfo>&& aNodeInfo);
  void Init();

  void ReportCanPlayTelemetry();

   * This is used when the browser is constructing a video element to play
   * a channel that we've already started loading. The src attribute and
   * <source> children are ignored.
   * @param aChannel the channel to use
   * @param aListener returns a stream listener that should receive
   * notifications for the stream
  nsresult LoadWithChannel(nsIChannel* aChannel, nsIStreamListener** aListener);

  // nsISupports

  // EventTarget
  void GetEventTargetParent(EventChainPreVisitor& aVisitor) override;

  virtual bool ParseAttribute(int32_t aNamespaceID, nsAtom* aAttribute,
                              const nsAString& aValue,
                              nsIPrincipal* aMaybeScriptedPrincipal,
                              nsAttrValue& aResult) override;

  virtual nsresult BindToTree(Document* aDocument, nsIContent* aParent,
                              nsIContent* aBindingParent) override;
  virtual void UnbindFromTree(bool aDeep = true,
                              bool aNullParent = true) override;
  virtual void DoneCreatingElement() override;

  virtual bool IsHTMLFocusable(bool aWithMouse, bool* aIsFocusable,
                               int32_t* aTabIndex) override;
  virtual int32_t TabIndexDefault() override;

  // Called by the video decoder object, on the main thread,
  // when it has read the metadata containing video dimensions,
  // etc.
  virtual void MetadataLoaded(const MediaInfo* aInfo,
                              UniquePtr<const MetadataTags> aTags) final;

  // Called by the decoder object, on the main thread,
  // when it has read the first frame of the video or audio.
  void FirstFrameLoaded() final;

  // Called by the video decoder object, on the main thread,
  // when the resource has a network error during loading.
  void NetworkError(const MediaResult& aError) final;

  // Called by the video decoder object, on the main thread, when the
  // resource has a decode error during metadata loading or decoding.
  void DecodeError(const MediaResult& aError) final;

  // Called by the decoder object, on the main thread, when the
  // resource has a decode issue during metadata loading or decoding, but can
  // continue decoding.
  void DecodeWarning(const MediaResult& aError) final;

  // Return true if error attribute is not null.
  bool HasError() const final;

  // Called by the video decoder object, on the main thread, when the
  // resource load has been cancelled.
  void LoadAborted() final;

  // Called by the video decoder object, on the main thread,
  // when the video playback has ended.
  void PlaybackEnded() final;

  // Called by the video decoder object, on the main thread,
  // when the resource has started seeking.
  void SeekStarted() final;

  // Called by the video decoder object, on the main thread,
  // when the resource has completed seeking.
  void SeekCompleted() final;

  // Called by the media stream, on the main thread, when the download
  // has been suspended by the cache or because the element itself
  // asked the decoder to suspend the download.
  void DownloadSuspended() final;

  // Called by the media stream, on the main thread, when the download
  // has been resumed by the cache or because the element itself
  // asked the decoder to resumed the download.
  void DownloadResumed();

  // Called to indicate the download is progressing.
  void DownloadProgressed() final;

  // Called by the media decoder to indicate whether the media cache has
  // suspended the channel.
  void NotifySuspendedByCache(bool aSuspendedByCache) final;

  bool IsActive() const;

  bool IsHidden() const;

  // Called by the media decoder and the video frame to get the
  // ImageContainer containing the video data.
  VideoFrameContainer* GetVideoFrameContainer() final;
  layers::ImageContainer* GetImageContainer();

   * Call this to reevaluate whether we should start/stop due to our owner
   * document being active, inactive, visible or hidden.
  void NotifyOwnerDocumentActivityChanged();

  // From PrincipalChangeObserver<DOMMediaStream>.
  void PrincipalChanged(DOMMediaStream* aStream) override;

  void UpdateSrcStreamVideoPrincipal(const PrincipalHandle& aPrincipalHandle);

  // Called after the MediaStream we're playing rendered a frame to aContainer
  // with a different principalHandle than the previous frame.
  void PrincipalHandleChangedForVideoFrameContainer(
      VideoFrameContainer* aContainer,
      const PrincipalHandle& aNewPrincipalHandle) override;

  // Dispatch events
  void DispatchAsyncEvent(const nsAString& aName) final;

  // Triggers a recomputation of readyState.
  void UpdateReadyState() override { UpdateReadyStateInternal(); }

  // Dispatch events that were raised while in the bfcache
  nsresult DispatchPendingMediaEvents();

  // Return true if we can activate autoplay assuming enough data has arrived.
  bool CanActivateAutoplay();

  // Notify that state has changed that might cause an autoplay element to
  // start playing.
  // If the element is 'autoplay' and is ready to play back (not paused,
  // autoplay pref enabled, etc), it should start playing back.
  void CheckAutoplayDataReady();

  // Check if the media element had crossorigin set when loading started
  bool ShouldCheckAllowOrigin();

  // Returns true if the currently loaded resource is CORS same-origin with
  // respect to the document.
  bool IsCORSSameOrigin();

  // Is the media element potentially playing as defined by the HTML 5
  // specification.
  bool IsPotentiallyPlaying() const;

  // Has playback ended as defined by the HTML 5 specification.
  bool IsPlaybackEnded() const;

  // principal of the currently playing resource. Anything accessing the
  // contents of this element must have a principal that subsumes this
  // principal. Returns null if nothing is playing.
  already_AddRefed<nsIPrincipal> GetCurrentPrincipal();

  // Principal of the currently playing video resource. Anything accessing the
  // image container of this element must have a principal that subsumes this
  // principal. If there are no live video tracks but content has been rendered
  // to the image container, we return the last video principal we had. Should
  // the image container be empty with no live video tracks, we return nullptr.
  already_AddRefed<nsIPrincipal> GetCurrentVideoPrincipal();

  // called to notify that the principal of the decoder's media resource has
  // changed.
  void NotifyDecoderPrincipalChanged() final;

  void GetEMEInfo(nsString& aEMEInfo);

  class StreamCaptureTrackSource;

  // Update the visual size of the media. Called from the decoder on the
  // main thread when/if the size changes.
  virtual void UpdateMediaSize(const nsIntSize& aSize);
  // Like UpdateMediaSize, but only updates the size if no size has yet
  // been set.
  void UpdateInitialMediaSize(const nsIntSize& aSize);

  void Invalidate(bool aImageSizeChanged, Maybe<nsIntSize>& aNewIntrinsicSize,
                  bool aForceInvalidate) override;

  // Returns the CanPlayStatus indicating if we can handle the
  // full MIME type including the optional codecs parameter.
  static CanPlayStatus GetCanPlay(const nsAString& aType,
                                  DecoderDoctorDiagnostics* aDiagnostics);

   * Called when a child source element is added to this media element. This
   * may queue a task to run the select resource algorithm if appropriate.
  void NotifyAddedSource();

   * Called when there's been an error fetching the resource. This decides
   * whether it's appropriate to fire an error event.
  void NotifyLoadError(const nsACString& aErrorDetails = nsCString());

   * Called by one of our associated MediaTrackLists (audio/video) when an
   * AudioTrack is enabled or a VideoTrack is selected.
  void NotifyMediaTrackEnabled(MediaTrack* aTrack);

   * Called by one of our associated MediaTrackLists (audio/video) when an
   * AudioTrack is disabled or a VideoTrack is unselected.
  void NotifyMediaTrackDisabled(MediaTrack* aTrack);

   * Called when a captured MediaStreamTrack is stopped so we can clean up its
   * MediaInputPort.
  void NotifyOutputTrackStopped(DOMMediaStream* aOwningStream,
                                TrackID aDestinationTrackID);

   * Returns the current load ID. Asynchronous events store the ID that was
   * current when they were enqueued, and if it has changed when they come to
   * fire, they consider themselves cancelled, and don't fire.
  uint32_t GetCurrentLoadID() { return mCurrentLoadID; }

   * Returns the load group for this media element's owner document.
   * XXX XBL2 issue.
  already_AddRefed<nsILoadGroup> GetDocumentLoadGroup();

   * Returns true if the media has played or completed a seek.
   * Used by video frame to determine whether to paint the poster.
  bool GetPlayedOrSeeked() const { return mHasPlayedOrSeeked; }

  nsresult CopyInnerTo(Element* aDest);

   * Sets the Accept header on the HTTP channel to the required
   * video or audio MIME types.
  virtual nsresult SetAcceptHeader(nsIHttpChannel* aChannel) = 0;

   * Sets the required request headers on the HTTP channel for
   * video or audio requests.
  void SetRequestHeaders(nsIHttpChannel* aChannel);

   * Asynchronously awaits a stable state, whereupon aRunnable runs on the main
   * thread. This adds an event which run aRunnable to the appshell's list of
   * sections synchronous the next time control returns to the event loop.
  void RunInStableState(nsIRunnable* aRunnable);

   * Fires a timeupdate event. If aPeriodic is true, the event will only
   * be fired if we've not fired a timeupdate event (for any reason) in the
   * last 250ms, as required by the spec when the current time is periodically
   * increasing during playback.
  void FireTimeUpdate(bool aPeriodic) final;

   * This will return null if mSrcStream is null, or if mSrcStream is not
   * null but its GetPlaybackStream() returns null --- which can happen during
   * cycle collection unlinking!
  MediaStream* GetSrcMediaStream() const;

  // WebIDL

  MediaError* GetError() const;

  void GetSrc(nsAString& aSrc) { GetURIAttr(nsGkAtoms::src, nullptr, aSrc); }
  void SetSrc(const nsAString& aSrc, ErrorResult& aError) {
    SetHTMLAttr(nsGkAtoms::src, aSrc, aError);
  void SetSrc(const nsAString& aSrc, nsIPrincipal* aTriggeringPrincipal,
              ErrorResult& aError) {
    SetHTMLAttr(nsGkAtoms::src, aSrc, aTriggeringPrincipal, aError);

  void GetCurrentSrc(nsAString& aCurrentSrc);

  void GetCrossOrigin(nsAString& aResult) {
    // Null for both missing and invalid defaults is ok, since we
    // always parse to an enum value, so we don't need an invalid
    // default, and we _want_ the missing default to be null.
    GetEnumAttr(nsGkAtoms::crossorigin, nullptr, aResult);
  void SetCrossOrigin(const nsAString& aCrossOrigin, ErrorResult& aError) {
    SetOrRemoveNullableStringAttr(nsGkAtoms::crossorigin, aCrossOrigin, aError);

  uint16_t NetworkState() const { return mNetworkState; }

  void NotifyXPCOMShutdown() final;

  // Called by media decoder when the audible state changed or when input is
  // a media stream.
  void SetAudibleState(bool aAudible) final;

  // Notify agent when the MediaElement changes its audible state.
  void NotifyAudioPlaybackChanged(AudibleChangedReasons aReason);

  void GetPreload(nsAString& aValue) {
    GetEnumAttr(nsGkAtoms::preload, nullptr, aValue);
  void SetPreload(const nsAString& aValue, ErrorResult& aRv) {
    SetHTMLAttr(nsGkAtoms::preload, aValue, aRv);

  already_AddRefed<TimeRanges> Buffered() const;

  void Load();

  void CanPlayType(const nsAString& aType, nsAString& aResult);

  uint16_t ReadyState() const { return mReadyState; }

  bool Seeking() const;

  double CurrentTime() const;

  void SetCurrentTime(double aCurrentTime, ErrorResult& aRv);
  void SetCurrentTime(double aCurrentTime) {
    SetCurrentTime(aCurrentTime, IgnoreErrors());

  void FastSeek(double aTime, ErrorResult& aRv);

  already_AddRefed<Promise> SeekToNextFrame(ErrorResult& aRv);

  double Duration() const;

  bool HasAudio() const { return mMediaInfo.HasAudio(); }

  virtual bool IsVideo() const { return false; }

  bool HasVideo() const { return mMediaInfo.HasVideo(); }

  bool IsEncrypted() const { return mIsEncrypted; }

  bool Paused() const { return mPaused; }

  double DefaultPlaybackRate() const { return mDefaultPlaybackRate; }

  void SetDefaultPlaybackRate(double aDefaultPlaybackRate, ErrorResult& aRv);

  double PlaybackRate() const { return mPlaybackRate; }

  void SetPlaybackRate(double aPlaybackRate, ErrorResult& aRv);

  already_AddRefed<TimeRanges> Played();

  already_AddRefed<TimeRanges> Seekable() const;

  bool Ended();

  bool Autoplay() const { return GetBoolAttr(nsGkAtoms::autoplay); }

  void SetAutoplay(bool aValue, ErrorResult& aRv) {
    SetHTMLBoolAttr(nsGkAtoms::autoplay, aValue, aRv);

  bool Loop() const { return GetBoolAttr(nsGkAtoms::loop); }

  void SetLoop(bool aValue, ErrorResult& aRv) {
    SetHTMLBoolAttr(nsGkAtoms::loop, aValue, aRv);

  already_AddRefed<Promise> Play(ErrorResult& aRv);

  void Pause(ErrorResult& aRv);
  void Pause() { Pause(IgnoreErrors()); }

  bool Controls() const { return GetBoolAttr(nsGkAtoms::controls); }

  void SetControls(bool aValue, ErrorResult& aRv) {
    SetHTMLBoolAttr(nsGkAtoms::controls, aValue, aRv);

  double Volume() const { return mVolume; }

  void SetVolume(double aVolume, ErrorResult& aRv);

  bool Muted() const { return mMuted & MUTED_BY_CONTENT; }
  void SetMuted(bool aMuted);

  bool DefaultMuted() const { return GetBoolAttr(nsGkAtoms::muted); }

  void SetDefaultMuted(bool aMuted, ErrorResult& aRv) {
    SetHTMLBoolAttr(nsGkAtoms::muted, aMuted, aRv);

  bool MozAllowCasting() const { return mAllowCasting; }

  void SetMozAllowCasting(bool aShow) { mAllowCasting = aShow; }

  bool MozIsCasting() const { return mIsCasting; }

  void SetMozIsCasting(bool aShow) { mIsCasting = aShow; }

  // Returns whether a call to Play() would be rejected with NotAllowedError.
  // This assumes "worst case" for unknowns. So if prompting for permission is
  // enabled and no permission is stored, this behaves as if the user would
  // opt to block.
  bool AllowedToPlay() const;

  already_AddRefed<MediaSource> GetMozMediaSourceObject() const;
  // Returns a string describing the state of the media player internal
  // data. Used for debugging purposes.
  void GetMozDebugReaderData(nsAString& aString);

  // Returns a promise which will be resolved after collecting debugging
  // data from decoder/reader/MDSM. Used for debugging purposes.
  already_AddRefed<Promise> MozRequestDebugInfo(ErrorResult& aRv);

  // Enables DecoderDoctorLogger logging. Used for debugging purposes.
  static void MozEnableDebugLog(const GlobalObject&);

  // Returns a promise which will be resolved after collecting debugging
  // log associated with this element. Used for debugging purposes.
  already_AddRefed<Promise> MozRequestDebugLog(ErrorResult& aRv);

  already_AddRefed<Promise> MozDumpDebugInfo();

  // For use by mochitests. Enabling pref ""
  void SetVisible(bool aVisible);

  // For use by mochitests. Enabling pref ""
  bool HasSuspendTaint() const;

  // For use by mochitests.
  bool IsVideoDecodingSuspended() const;

  // For use by mochitests only.
  bool IsVisible() const;

  // Synchronously, return the next video frame and mark the element unable to
  // participate in decode suspending.
  // This function is synchronous for cases where decoding has been suspended
  // and JS needs a frame to use in, eg., nsLayoutUtils::SurfaceFromElement()
  // via drawImage().
  already_AddRefed<layers::Image> GetCurrentImage();

  already_AddRefed<DOMMediaStream> GetSrcObject() const;
  void SetSrcObject(DOMMediaStream& aValue);
  void SetSrcObject(DOMMediaStream* aValue);

  bool MozPreservesPitch() const { return mPreservesPitch; }
  void SetMozPreservesPitch(bool aPreservesPitch);

  MediaKeys* GetMediaKeys() const;

  already_AddRefed<Promise> SetMediaKeys(MediaKeys* mediaKeys,
                                         ErrorResult& aRv);

  mozilla::dom::EventHandlerNonNull* GetOnencrypted();
  void SetOnencrypted(mozilla::dom::EventHandlerNonNull* aCallback);

  mozilla::dom::EventHandlerNonNull* GetOnwaitingforkey();
  void SetOnwaitingforkey(mozilla::dom::EventHandlerNonNull* aCallback);

  void DispatchEncrypted(const nsTArray<uint8_t>& aInitData,
                         const nsAString& aInitDataType) override;

  bool IsEventAttributeNameInternal(nsAtom* aName) override;

  // Returns the principal of the "top level" document; the origin displayed
  // in the URL bar of the browser window.
  already_AddRefed<nsIPrincipal> GetTopLevelPrincipal();

  bool ContainsRestrictedContent();

  void NotifyWaitingForKey() override;

  already_AddRefed<DOMMediaStream> CaptureAudio(ErrorResult& aRv,
                                                MediaStreamGraph* aGraph);

  already_AddRefed<DOMMediaStream> MozCaptureStream(ErrorResult& aRv);

  already_AddRefed<DOMMediaStream> MozCaptureStreamUntilEnded(ErrorResult& aRv);

  bool MozAudioCaptured() const { return mAudioCaptured; }

  void MozGetMetadata(JSContext* aCx, JS::MutableHandle<JSObject*> aResult,
                      ErrorResult& aRv);

  double MozFragmentEnd();

  AudioTrackList* AudioTracks();

  VideoTrackList* VideoTracks();

  TextTrackList* GetTextTracks();

  already_AddRefed<TextTrack> AddTextTrack(TextTrackKind aKind,
                                           const nsAString& aLabel,
                                           const nsAString& aLanguage);

  void AddTextTrack(TextTrack* aTextTrack) {

  void RemoveTextTrack(TextTrack* aTextTrack, bool aPendingListOnly = false) {
    if (mTextTrackManager) {
      mTextTrackManager->RemoveTextTrack(aTextTrack, aPendingListOnly);

  void NotifyCueAdded(TextTrackCue& aCue) {
    if (mTextTrackManager) {
  void NotifyCueRemoved(TextTrackCue& aCue) {
    if (mTextTrackManager) {
  void NotifyCueUpdated(TextTrackCue* aCue) {
    if (mTextTrackManager) {

  void NotifyCueDisplayStatesChanged();

  bool IsBlessed() const { return mIsBlessed; }

  // A method to check whether we are currently playing.
  bool IsCurrentlyPlaying() const;

  // Returns true if the media element is being destroyed. Used in
  // dormancy checks to prevent dormant processing for an element
  // that will soon be gone.
  bool IsBeingDestroyed();

  void OnVisibilityChange(Visibility aNewVisibility);

  // These are used for testing only
  float ComputedVolume() const;
  bool ComputedMuted() const;
  nsSuspendedTypes ComputedSuspended() const;

  void SetMediaInfo(const MediaInfo& aInfo);

  AbstractThread* AbstractMainThread() const final;

  // Telemetry: to record the usage of a {visible / invisible} video element as
  // the source of {drawImage(), createPattern(), createImageBitmap() and
  // captureStream()} APIs.
  enum class CallerAPI {
  void MarkAsContentSource(CallerAPI aAPI);

  Document* GetDocument() const override;

  void ConstructMediaTracks(const MediaInfo* aInfo) override;

  void RemoveMediaTracks() override;

  already_AddRefed<GMPCrashHelper> CreateGMPCrashHelper() override;

  // The promise resolving/rejection is queued as a "micro-task" which will be
  // handled immediately after the current JS task and before any pending JS
  // tasks.
  // At the time we are going to resolve/reject a promise, the "seeking" event
  // task should already be queued but might yet be processed, so we queue one
  // more task to file the promise resolving/rejection micro-tasks
  // asynchronously to make sure that the micro-tasks are processed after the
  // "seeking" event task.
  void AsyncResolveSeekDOMPromiseIfExists() override;
  void AsyncRejectSeekDOMPromiseIfExists() override;

  nsISerialEventTarget* MainThreadEventTarget() {
    return mMainThreadEventTarget;

  // Set the sink id (of the output device) that the audio will play. If aSinkId
  // is empty the default device will be set.
  already_AddRefed<Promise> SetSinkId(const nsAString& aSinkId,
                                      ErrorResult& aRv);
  // Get the sink id of the device that audio is being played. Initial value is
  // empty and the default device is being used.
  void GetSinkId(nsString& aSinkId) {
    aSinkId = mSink.first();

  // This is used to notify MediaElementAudioSourceNode that media element is
  // allowed to play when media element is used as a source for web audio, so
  // that we can start AudioContext if it was not allowed to start.
  RefPtr<GenericNonExclusivePromise> GetAllowedToPlayPromise();

  virtual ~HTMLMediaElement();

  class AudioChannelAgentCallback;
  class ChannelLoader;
  class ErrorSink;
  class MediaLoadListener;
  class MediaStreamTrackListener;
  class VideoFrameListener;
  class ShutdownObserver;

  MediaDecoderOwner::NextFrameStatus NextFrameStatus();

  void SetDecoder(MediaDecoder* aDecoder);

  // Holds references to the DOM wrappers for the MediaStreams that we're
  // writing to.
  struct OutputMediaStream {

    RefPtr<DOMMediaStream> mStream;
    TrackID mNextAvailableTrackID;
    bool mFinishWhenEnded;
    bool mCapturingAudioOnly;
    bool mCapturingDecoder;
    bool mCapturingMediaStream;

    // The following members are keeping state for a captured MediaStream.
    nsTArray<Pair<nsString, RefPtr<MediaInputPort>>> mTrackPorts;

  void PlayInternal(bool aHandlingUserInput);

  /** Use this method to change the mReadyState member, so required
   * events can be fired.
  void ChangeReadyState(nsMediaReadyState aState);

   * Use this method to change the mNetworkState member, so required
   * actions will be taken during the transition.
  void ChangeNetworkState(nsMediaNetworkState aState);

   * The MediaElement will be responsible for creating and releasing the audio
   * wakelock depending on the playing and audible state.
  virtual void WakeLockRelease();
  virtual void UpdateWakeLock();

  void CreateAudioWakeLockIfNeeded();
  void ReleaseAudioWakeLockIfExists();
  RefPtr<WakeLock> mWakeLock;

   * Logs a warning message to the web console to report various failures.
   * aMsg is the localized message identifier, aParams is the parameters to
   * be substituted into the localized message, and aParamCount is the number
   * of parameters in aParams.
  void ReportLoadError(const char* aMsg, const char16_t** aParams = nullptr,
                       uint32_t aParamCount = 0);

   * Log message to web console.
  void ReportToConsole(uint32_t aErrorFlags, const char* aMsg,
                       const char16_t** aParams = nullptr,
                       uint32_t aParamCount = 0) const;

   * Changes mHasPlayedOrSeeked to aValue. If mHasPlayedOrSeeked changes
   * we'll force a reflow so that the video frame gets reflowed to reflect
   * the poster hiding or showing immediately.
  void SetPlayedOrSeeked(bool aValue);

   * Initialize the media element for playback of aStream
  void SetupSrcMediaStreamPlayback(DOMMediaStream* aStream);
   * Stop playback on mSrcStream.
  void EndSrcMediaStreamPlayback();
   * Ensure we're playing mSrcStream if and only if we're not paused.
  enum { REMOVING_SRC_STREAM = 0x1 };
  void UpdateSrcMediaStreamPlaying(uint32_t aFlags = 0);

   * mSrcStream's graph's CurrentTime() has been updated. It might be time to
   * fire "timeupdate".
  void UpdateSrcStreamTime();

   * Called by our DOMMediaStream::TrackListener when a new MediaStreamTrack has
   * been added to the playback stream of |mSrcStream|.
  void NotifyMediaStreamTrackAdded(const RefPtr<MediaStreamTrack>& aTrack);

   * Called by our DOMMediaStream::TrackListener when a MediaStreamTrack in
   * |mSrcStream|'s playback stream has ended.
  void NotifyMediaStreamTrackRemoved(const RefPtr<MediaStreamTrack>& aTrack);

   * Enables or disables all tracks forwarded from mSrcStream to all
   * OutputMediaStreams. We do this for muting the tracks when pausing,
   * and unmuting when playing the media element again.
   * If mSrcStream is unset, this does nothing.
  void SetCapturedOutputStreamsEnabled(bool aEnabled);

   * Create a new MediaStreamTrack for aTrack and add it to the DOMMediaStream
   * in aOutputStream. This automatically sets the output track to enabled or
   * disabled depending on our current playing state.
  void AddCaptureMediaTrackToOutputStream(MediaTrack* aTrack,
                                          OutputMediaStream& aOutputStream,
                                          bool aAsyncAddtrack = true);

   * Returns an DOMMediaStream containing the played contents of this
   * element. When aBehavior is FINISH_WHEN_ENDED, when this element ends
   * playback we will finish the stream and not play any more into it.  When
   * aType is CONTINUE_WHEN_ENDED, ending playback does not finish the stream.
   * The stream will never finish.
   * When aType is CAPTURE_AUDIO, we stop playout of audio and instead route it
   * to the DOMMediaStream. Volume and mute state will be applied to the audio
   * reaching the stream. No video tracks will be captured in this case.
  already_AddRefed<DOMMediaStream> CaptureStreamInternal(
      StreamCaptureBehavior aBehavior, StreamCaptureType aType,
      MediaStreamGraph* aGraph);

   * Initialize a decoder as a clone of an existing decoder in another
   * element.
   * mLoadingSrc must already be set.
  nsresult InitializeDecoderAsClone(ChannelMediaDecoder* aOriginal);

   * Call Load() and FinishDecoderSetup() on the decoder. It also handle
   * resource cloning if DecoderType is ChannelMediaDecoder.
  template <typename DecoderType, typename... LoadArgs>
  nsresult SetupDecoder(DecoderType* aDecoder, LoadArgs&&... aArgs);

   * Initialize a decoder to load the given channel. The decoder's stream
   * listener is returned via aListener.
   * mLoadingSrc must already be set.
  nsresult InitializeDecoderForChannel(nsIChannel* aChannel,
                                       nsIStreamListener** aListener);

   * Finish setting up the decoder after Load() has been called on it.
   * Called by InitializeDecoderForChannel/InitializeDecoderAsClone.
  nsresult FinishDecoderSetup(MediaDecoder* aDecoder);

   * Call this after setting up mLoadingSrc and mDecoder.
  void AddMediaElementToURITable();
   * Call this before modifying mLoadingSrc.
  void RemoveMediaElementFromURITable();
   * Call this to find a media element with the same NodePrincipal and
   * mLoadingSrc set to aURI, and with a decoder on which Load() has been
   * called.
  HTMLMediaElement* LookupMediaElementURITable(nsIURI* aURI);

   * Shutdown and clear mDecoder and maintain associated invariants.
  void ShutdownDecoder();
   * Execute the initial steps of the load algorithm that ensure existing
   * loads are aborted, the element is emptied, and a new load ID is
   * created.
  void AbortExistingLoads();

   * This is the dedicated media source failure steps.
   * Called when all potential resources are exhausted. Changes network
   * state to NETWORK_NO_SOURCE, and sends error event with code
  void NoSupportedMediaSourceError(
      const nsACString& aErrorDetails = nsCString());

   * Per spec, Failed with elements: Queue a task, using the DOM manipulation
   * task source, to fire a simple event named error at the candidate element.
   * So dispatch |QueueLoadFromSourceTask| to main thread to make sure the task
   * will be executed later than loadstart event.
  void DealWithFailedElement(nsIContent* aSourceElement);

   * Attempts to load resources from the <source> children. This is a
   * substep of the resource selection algorithm. Do not call this directly,
   * call QueueLoadFromSourceTask() instead.
  void LoadFromSourceChildren();

   * Asynchronously awaits a stable state, and then causes
   * LoadFromSourceChildren() to be called on the main threads' event loop.
  void QueueLoadFromSourceTask();

   * Runs the media resource selection algorithm.
  void SelectResource();

   * A wrapper function that allows us to cleanly reset flags after a call
   * to SelectResource()
  void SelectResourceWrapper();

   * Asynchronously awaits a stable state, and then causes SelectResource()
   * to be run on the main thread's event loop.
  void QueueSelectResourceTask();

   * When loading a new source on an existing media element, make sure to reset
   * everything that is accessible using the media element API.
  void ResetState();

   * The resource-fetch algorithm step of the load algorithm.
  MediaResult LoadResource();

   * Selects the next <source> child from which to load a resource. Called
   * during the resource selection algorithm. Stores the return value in
   * mSourceLoadCandidate before returning.
  Element* GetNextSource();

   * Changes mDelayingLoadEvent, and will call BlockOnLoad()/UnblockOnLoad()
   * on the owning document, so it can delay the load event firing.
  void ChangeDelayLoadStatus(bool aDelay);

   * If we suspended downloading after the first frame, unsuspend now.
  void StopSuspendingAfterFirstFrame();

   * Called when our channel is redirected to another channel.
   * Updates our mChannel reference to aNewChannel.
  nsresult OnChannelRedirect(nsIChannel* aChannel, nsIChannel* aNewChannel,
                             uint32_t aFlags);

   * Call this to reevaluate whether we should be holding a self-reference.
  void AddRemoveSelfReference();

   * Called when "xpcom-shutdown" event is received.
  void NotifyShutdownEvent();

   * Possible values of the 'preload' attribute.
  enum PreloadAttrValue : uint8_t {
    PRELOAD_ATTR_EMPTY,     // set to ""
    PRELOAD_ATTR_NONE,      // set to "none"
    PRELOAD_ATTR_METADATA,  // set to "metadata"
    PRELOAD_ATTR_AUTO       // set to "auto"

   * The preloading action to perform. These dictate how we react to the
   * preload attribute. See mPreloadAction.
  enum PreloadAction {
    PRELOAD_UNDEFINED = 0,  // not determined - used only for initialization
    PRELOAD_NONE = 1,       // do not preload
    PRELOAD_METADATA = 2,   // preload only the metadata (and first frame)
    PRELOAD_ENOUGH = 3      // preload enough data to allow uninterrupted
                            // playback

   * The guts of Load(). Load() acts as a wrapper around this which sets
   * mIsDoingExplicitLoad to true so that when script calls 'load()'
   * preload-none will be automatically upgraded to preload-metadata.
  void DoLoad();

   * Suspends the load of mLoadingSrc, so that it can be resumed later
   * by ResumeLoad(). This is called when we have a media with a 'preload'
   * attribute value of 'none', during the resource selection algorithm.
  void SuspendLoad();

   * Resumes a previously suspended load (suspended by SuspendLoad(uri)).
   * Will continue running the resource selection algorithm.
   * Sets mPreloadAction to aAction.
  void ResumeLoad(PreloadAction aAction);

   * Handle a change to the preload attribute. Should be called whenever the
   * value (or presence) of the preload attribute changes. The change in
   * attribute value may cause a change in the mPreloadAction of this
   * element. If there is a change then this method will initiate any
   * behaviour that is necessary to implement the action.
  void UpdatePreloadAction();

   * Fire progress events if needed according to the time and byte constraints
   * outlined in the specification. aHaveNewProgress is true if progress has
   * just been detected.  Otherwise the method is called as a result of the
   * progress timer.
  void CheckProgress(bool aHaveNewProgress);
  static void ProgressTimerCallback(nsITimer* aTimer, void* aClosure);
   * Start timer to update download progress.
  void StartProgressTimer();
   * Start sending progress and/or stalled events.
  void StartProgress();
   * Stop progress information timer and events.
  void StopProgress();

   * Dispatches an error event to a child source element.
  void DispatchAsyncSourceError(nsIContent* aSourceElement);

   * Resets the media element for an error condition as per aErrorCode.
   * aErrorCode must be one of WebIDL HTMLMediaElement error codes.
  void Error(uint16_t aErrorCode,
             const nsACString& aErrorDetails = nsCString());

   * Returns the URL spec of the currentSrc.
  void GetCurrentSpec(nsCString& aString);

   * Process any media fragment entries in the URI
  void ProcessMediaFragmentURI();

   * Mute or unmute the audio and change the value that the |muted| map.
  void SetMutedInternal(uint32_t aMuted);
   * Update the volume of the output audio stream to match the element's
   * current mMuted/mVolume/mAudioChannelFaded state.
  void SetVolumeInternal();

   * Suspend (if aPauseForInactiveDocument) or resume element playback and
   * resource download.  If aSuspendEvents is true, event delivery is
   * suspended (and events queued) until the element is resumed.
  void SuspendOrResumeElement(bool aPauseElement, bool aSuspendEvents);

  // Get the HTMLMediaElement object if the decoder is being used from an
  // HTML media element, and null otherwise.
  HTMLMediaElement* GetMediaElement() final { return this; }

  // Return true if decoding should be paused
  bool GetPaused() final { return Paused(); }

   * Video has been playing while hidden and, if feature was enabled, would
   * trigger suspending decoder.
   * Used to track hidden-video-decode-suspend telemetry.
  static void VideoDecodeSuspendTimerCallback(nsITimer* aTimer, void* aClosure);
   * Video is now both: playing and hidden.
   * Used to track hidden-video telemetry.
  void HiddenVideoStart();
   * Video is not playing anymore and/or has become visible.
   * Used to track hidden-video telemetry.
  void HiddenVideoStop();

  void ReportTelemetry();

  // Seeks to aTime seconds. aSeekType can be Exact to seek to exactly the
  // seek target, or PrevSyncPoint if a quicker but less precise seek is
  // desired, and we'll seek to the sync point (keyframe and/or start of the
  // next block of audio samples) preceeding seek target.
  already_AddRefed<Promise> Seek(double aTime, SeekTarget::Type aSeekType,
                                 ErrorResult& aRv);

  // Update the audio channel playing state
  void UpdateAudioChannelPlayingState(bool aForcePlaying = false);

  // Adds to the element's list of pending text tracks each text track
  // in the element's list of text tracks whose text track mode is not disabled
  // and whose text track readiness state is loading.
  void PopulatePendingTextTrackList();

  // Gets a reference to the MediaElement's TextTrackManager. If the
  // MediaElement doesn't yet have one then it will create it.
  TextTrackManager* GetOrCreateTextTrackManager();

  // Recomputes ready state and fires events as necessary based on current
  // state.
  void UpdateReadyStateInternal();

  // Determine if the element should be paused because of suspend conditions.
  bool ShouldElementBePaused();

  // Create or destroy the captured stream.
  void AudioCaptureStreamChange(bool aCapture);

  // A method to check whether the media element is allowed to start playback.
  bool AudioChannelAgentBlockedPlay();

  // If the network state is empty and then we would trigger DoLoad().
  void MaybeDoLoad();

  // Anything we need to check after played success and not related with spec.
  void UpdateCustomPolicyAfterPlayed();

  // Returns a StreamCaptureType populated with the right bits, depending on the
  // tracks this HTMLMediaElement has.
  StreamCaptureType CaptureTypeForElement();

  // True if this element can be captured, false otherwise.
  bool CanBeCaptured(StreamCaptureType aCaptureType);

  class nsAsyncEventRunner;
  class nsNotifyAboutPlayingRunner;
  class nsResolveOrRejectPendingPlayPromisesRunner;
  using nsGenericHTMLElement::DispatchEvent;
  // For nsAsyncEventRunner.
  nsresult DispatchEvent(const nsAString& aName);

  // This method moves the mPendingPlayPromises into a temperate object. So the
  // mPendingPlayPromises is cleared after this method call.
  nsTArray<RefPtr<PlayPromise>> TakePendingPlayPromises();

  // This method snapshots the mPendingPlayPromises by TakePendingPlayPromises()
  // and queues a task to resolve them.
  void AsyncResolvePendingPlayPromises();

  // This method snapshots the mPendingPlayPromises by TakePendingPlayPromises()
  // and queues a task to reject them.
  void AsyncRejectPendingPlayPromises(nsresult aError);

  // This method snapshots the mPendingPlayPromises by TakePendingPlayPromises()
  // and queues a task to resolve them also to dispatch a "playing" event.
  void NotifyAboutPlaying();

  already_AddRefed<Promise> CreateDOMPromise(ErrorResult& aRv) const;

  // Pass information for deciding the video decode mode to decoder.
  void NotifyDecoderActivityChanges() const;

  // Mark the decoder owned by the element as tainted so that the
  // suspend-video-decoder is disabled.
  void MarkAsTainted();

  virtual nsresult AfterSetAttr(int32_t aNameSpaceID, nsAtom* aName,
                                const nsAttrValue* aValue,
                                const nsAttrValue* aOldValue,
                                nsIPrincipal* aMaybeScriptedPrincipal,
                                bool aNotify) override;
  virtual nsresult OnAttrSetButNotChanged(int32_t aNamespaceID, nsAtom* aName,
                                          const nsAttrValueOrString& aValue,
                                          bool aNotify) override;

  bool DetachExistingMediaKeys();
  bool TryRemoveMediaKeysAssociation();
  void RemoveMediaKeys();
  bool AttachNewMediaKeys();
  bool TryMakeAssociationWithCDM(CDMProxy* aProxy);
  void MakeAssociationWithCDMResolved();
  void SetCDMProxyFailure(const MediaResult& aResult);
  void ResetSetMediaKeysTempVariables();

  void PauseIfShouldNotBePlaying();

  WatchManager<HTMLMediaElement> mWatchManager;

  // If the media element's tab has never been in the foreground, this
  // registers as with the AudioChannelAgent to notify us when the tab
  // is put in the foreground, whereupon we will begin playback.
  bool AudioChannelAgentDelayingPlayback();

  // Update the silence range of the audio track when the audible status of
  // silent audio track changes or seeking to the new position where the audio
  // track is silent.
  void UpdateAudioTrackSilenceRange(bool aAudible);

  // When silent audio track becomes audible or seeking to new place, we would
  // end the current silence range and accumulate it to the total silence
  // proportion of audio track and update current silence range.
  void AccumulateAudioTrackSilence();

  // True when the media element's audio track is containing silence now.
  bool IsAudioTrackCurrentlySilent() const;

  // Calculate the audio track silence proportion and then report the telemetry
  // result. we would report the result when decoder is destroyed.
  void ReportAudioTrackSilenceProportionTelemetry();

  // When the play is not allowed, dispatch related events which are used for
  // testing or changing control UI.
  void DispatchEventsWhenPlayWasNotAllowed();

  // The current decoder. Load() has been called on this decoder.
  // At most one of mDecoder and mSrcStream can be non-null.
  RefPtr<MediaDecoder> mDecoder;

  // The DocGroup-specific nsISerialEventTarget of this HTML element on the main
  // thread.
  nsCOMPtr<nsISerialEventTarget> mMainThreadEventTarget;

  // The DocGroup-specific AbstractThread::MainThread() of this HTML element.
  RefPtr<AbstractThread> mAbstractMainThread;

  // A reference to the VideoFrameContainer which contains the current frame
  // of video to display.
  RefPtr<VideoFrameContainer> mVideoFrameContainer;

  // Holds a reference to the DOM wrapper for the MediaStream that has been
  // set in the src attribute.
  RefPtr<DOMMediaStream> mSrcAttrStream;

  // Holds the triggering principal for the src attribute.
  nsCOMPtr<nsIPrincipal> mSrcAttrTriggeringPrincipal;

  // Holds a reference to the DOM wrapper for the MediaStream that we're
  // actually playing.
  // At most one of mDecoder and mSrcStream can be non-null.
  RefPtr<DOMMediaStream> mSrcStream;

  // True once mSrcStream's initial set of tracks are known.
  bool mSrcStreamTracksAvailable = false;

  // While mPaused is true and mSrcStream is set, this is the value to use for
  // CurrentTime(). Otherwise this is set to GRAPH_TIME_MAX.
  GraphTime mSrcStreamPausedGraphTime = GRAPH_TIME_MAX;

  // The offset in GraphTime that this media element started playing the
  // playback stream of mSrcStream.
  GraphTime mSrcStreamGraphTimeOffset = 0;

  // True once PlaybackEnded() is called and we're playing a MediaStream.
  // Reset to false if we start playing mSrcStream again.
  bool mSrcStreamPlaybackEnded = false;

  // Holds a reference to the stream connecting this stream to the capture sink.
  RefPtr<MediaInputPort> mCaptureStreamPort;

  // Holds references to the DOM wrappers for the MediaStreams that we're
  // writing to.
  nsTArray<OutputMediaStream> mOutputStreams;

  // The next track id to use for a captured MediaDecoder.
  TrackID mNextAvailableMediaDecoderOutputTrackID = 1;

  // Holds a reference to the size-getting track listener attached to
  // mSelectedVideoStreamTrack.
  RefPtr<VideoFrameListener> mVideoFrameListener;
  // The currently selected video stream track.
  RefPtr<VideoStreamTrack> mSelectedVideoStreamTrack;

  const RefPtr<ShutdownObserver> mShutdownObserver;

  // Holds a reference to the MediaSource, if any, referenced by the src
  // attribute on the media element.
  RefPtr<MediaSource> mSrcMediaSource;

  // Holds a reference to the MediaSource supplying data for playback.  This
  // may either match mSrcMediaSource or come from Source element children.
  // This is set when and only when mLoadingSrc corresponds to an object url
  // that resolved to a MediaSource.
  RefPtr<MediaSource> mMediaSource;

  RefPtr<ChannelLoader> mChannelLoader;

  // Points to the child source elements, used to iterate through the children
  // when selecting a resource to load.  This is the previous sibling of the
  // child considered the current 'candidate' in:
  // mSourcePointer == nullptr, we will next try to load |GetFirstChild()|.
  // mSourcePointer == GetLastChild(), we've exhausted all sources, waiting
  // for new elements to be appended.
  nsCOMPtr<nsIContent> mSourcePointer;

  // Points to the document whose load we're blocking. This is the document
  // we're bound to when loading starts.
  nsCOMPtr<Document> mLoadBlockedDoc;

  // Contains names of events that have been raised while in the bfcache.
  // These events get re-dispatched when the bfcache is exited.
  nsTArray<nsString> mPendingEvents;

  // Media loading flags. See:
  nsMediaNetworkState mNetworkState = HTMLMediaElement_Binding::NETWORK_EMPTY;
  nsMediaReadyState mReadyState = HTMLMediaElement_Binding::HAVE_NOTHING;

  enum LoadAlgorithmState {
    // No load algorithm instance is waiting for a source to be added to the
    // media in order to continue loading.
    // We've run the load algorithm, and we tried all source children of the
    // media element, and failed to load any successfully. We're waiting for
    // another source element to be added to the media element, and will try
    // to load any such element when its added.

  // The current media load ID. This is incremented every time we start a
  // new load. Async events note the ID when they're first sent, and only fire
  // if the ID is unchanged when they come to fire.
  uint32_t mCurrentLoadID = 0;

  // Denotes the waiting state of a load algorithm instance. When the load
  // algorithm is waiting for a source element child to be added, this is set
  // to WAITING_FOR_SOURCE, otherwise it's NOT_WAITING.
  LoadAlgorithmState mLoadWaitStatus = NOT_WAITING;

  // Current audio volume
  double mVolume = 1.0;

  // True if the audio track is not silent.
  bool mIsAudioTrackAudible = false;

  // Used to mark the start of the silence range of audio track.
  double mAudioTrackSilenceStartedTime = 0.0;

  // Save all the silence ranges, all ranges would be normalized. That means
  // intervals won't overlap or touch each other.
  media::TimeIntervals mSilenceTimeRanges;

  // True if we have calculated silence range before SeekEnd(). This attribute
  // would be reset after seeking completed.
  bool mHasAccumulatedSilenceRangeBeforeSeekEnd = false;

  enum MutedReasons {
    MUTED_BY_CONTENT = 0x01,

  uint32_t mMuted = 0;

  UniquePtr<const MetadataTags> mTags;

  // URI of the resource we're attempting to load. This stores the value we
  // return in the currentSrc attribute. Use GetCurrentSrc() to access the
  // currentSrc attribute.
  // This is always the original URL we're trying to load --- before
  // redirects etc.
  nsCOMPtr<nsIURI> mLoadingSrc;

  // The triggering principal for the current source.
  nsCOMPtr<nsIPrincipal> mLoadingSrcTriggeringPrincipal;

  // Stores the current preload action for this element. Initially set to
  // PRELOAD_UNDEFINED, its value is changed by calling
  // UpdatePreloadAction().
  PreloadAction mPreloadAction = PRELOAD_UNDEFINED;

  // Time that the last timeupdate event was fired. Read/Write from the
  // main thread only.
  TimeStamp mTimeUpdateTime;

  // Time that the last progress event was fired. Read/Write from the
  // main thread only.
  TimeStamp mProgressTime;

  // Time that data was last read from the media resource. Used for
  // computing if the download has stalled and to rate limit progress events
  // when data is arriving slower than PROGRESS_MS.
  // Read/Write from the main thread only.
  TimeStamp mDataTime;

  // Media 'currentTime' value when the last timeupdate event occurred.
  // Read/Write from the main thread only.
  double mLastCurrentTime = 0.0;

  // Logical start time of the media resource in seconds as obtained
  // from any media fragments. A negative value indicates that no
  // fragment time has been set. Read/Write from the main thread only.
  double mFragmentStart = -1.0;

  // Logical end time of the media resource in seconds as obtained
  // from any media fragments. A negative value indicates that no
  // fragment time has been set. Read/Write from the main thread only.
  double mFragmentEnd = -1.0;

  // The defaultPlaybackRate attribute gives the desired speed at which the
  // media resource is to play, as a multiple of its intrinsic speed.
  double mDefaultPlaybackRate = 1.0;

  // The playbackRate attribute gives the speed at which the media resource
  // plays, as a multiple of its intrinsic speed. If it is not equal to the
  // defaultPlaybackRate, then the implication is that the user is using a
  // feature such as fast forward or slow motion playback.
  double mPlaybackRate = 1.0;

  // True if pitch correction is applied when playbackRate is set to a
  // non-intrinsic value.
  bool mPreservesPitch = true;

  // Reference to the source element last returned by GetNextSource().
  // This is the child source element which we're trying to load from.
  nsCOMPtr<nsIContent> mSourceLoadCandidate;

  // Range of time played.
  RefPtr<TimeRanges> mPlayed;

  // Timer used for updating progress events.
  nsCOMPtr<nsITimer> mProgressTimer;

  // Timer used to simulate video-suspend.
  nsCOMPtr<nsITimer> mVideoDecodeSuspendTimer;

  // Encrypted Media Extension media keys.
  RefPtr<MediaKeys> mMediaKeys;
  RefPtr<MediaKeys> mIncomingMediaKeys;
  // The dom promise is used for HTMLMediaElement::SetMediaKeys.
  RefPtr<DetailedPromise> mSetMediaKeysDOMPromise;
  // Used to indicate if the MediaKeys attaching operation is on-going or not.
  bool mAttachingMediaKey = false;
  MozPromiseRequestHolder<SetCDMPromise> mSetCDMRequest;

  // Stores the time at the start of the current 'played' range.
  double mCurrentPlayRangeStart = 1.0;

  // True if loadeddata has been fired.
  bool mLoadedDataFired = false;

  // Indicates whether current playback is a result of user action
  // (ie. calling of the Play method), or automatic playback due to
  // the 'autoplay' attribute being set. A true value indicates the
  // latter case.
  // The 'autoplay' HTML attribute indicates that the video should
  // start playing when loaded. The 'autoplay' attribute of the object
  // is a mirror of the HTML attribute. These are different from this
  // 'mAutoplaying' flag, which indicates whether the current playback
  // is a result of the autoplay attribute.
  bool mAutoplaying = true;

  // Playback of the video is paused either due to calling the
  // 'Pause' method, or playback not yet having started.
  Watchable<bool> mPaused;

  // The following two fields are here for the private storage of the builtin
  // video controls, and control 'casting' of the video to external devices
  // (TVs, projectors etc.)
  // True if casting is currently allowed
  bool mAllowCasting = false;
  // True if currently casting this video
  bool mIsCasting = false;

  // True if the sound is being captured.
  bool mAudioCaptured = false;

  // If TRUE then the media element was actively playing before the currently
  // in progress seeking. If FALSE then the media element is either not seeking
  // or was not actively playing before the current seek. Used to decide whether
  // to raise the 'waiting' event as per in HTML 5 specification.
  bool mPlayingBeforeSeek = false;

  // True iff this element is paused because the document is inactive or has
  // been suspended by the audio channel service.
  bool mPausedForInactiveDocumentOrChannel = false;

  // True iff event delivery is suspended (mPausedForInactiveDocumentOrChannel
  // must also be true).
  bool mEventDeliveryPaused = false;

  // True if we're running the "load()" method.
  bool mIsRunningLoadMethod = false;

  // True if we're running or waiting to run queued tasks due to an explicit
  // call to "load()".
  bool mIsDoingExplicitLoad = false;

  // True if we're loading the resource from the child source elements.
  bool mIsLoadingFromSourceChildren = false;

  // True if we're delaying the "load" event. They are delayed until either
  // an error occurs, or the first frame is loaded.
  bool mDelayingLoadEvent = false;

  // True when we've got a task queued to call SelectResource(),
  // or while we're running SelectResource().
  bool mIsRunningSelectResource = false;

  // True when we already have select resource call queued
  bool mHaveQueuedSelectResource = false;

  // True if we suspended the decoder because we were paused,
  // preloading metadata is enabled, autoplay was not enabled, and we loaded
  // the first frame.
  bool mSuspendedAfterFirstFrame = false;

  // True if we are allowed to suspend the decoder because we were paused,
  // preloading metdata was enabled, autoplay was not enabled, and we loaded
  // the first frame.
  bool mAllowSuspendAfterFirstFrame = true;

  // True if we've played or completed a seek. We use this to determine
  // when the poster frame should be shown.
  bool mHasPlayedOrSeeked = false;

  // True if we've added a reference to ourselves to keep the element
  // alive while no-one is referencing it but the element may still fire
  // events of its own accord.
  bool mHasSelfReference = false;

  // True if we've received a notification that the engine is shutting
  // down.
  bool mShuttingDown = false;

  // True if we've suspended a load in the resource selection algorithm
  // due to loading a preload:none media. When true, the resource we'll
  // load when the user initiates either playback or an explicit load is
  // stored in mPreloadURI.
  bool mSuspendedForPreloadNone = false;

  // True if we've connected mSrcStream to the media element output.
  bool mSrcStreamIsPlaying = false;

  // True if we should set nsIClassOfService::UrgentStart to the channel to
  // get the response ASAP for better user responsiveness.
  bool mUseUrgentStartForChannel = false;

  // The CORS mode when loading the media element

  // Info about the played media.
  MediaInfo mMediaInfo;

  // True if the media has encryption information.
  bool mIsEncrypted = false;

  enum WaitingForKeyState {

  // True when the CDM cannot decrypt the current block due to lacking a key.
  // Note: the "waitingforkey" event is not dispatched until all decoded data
  // has been rendered.
  WaitingForKeyState mWaitingForKey = NOT_WAITING_FOR_KEY;

  // Listens for waitingForKey events from the owned decoder.
  MediaEventListener mWaitingForKeyListener;

  // Init Data that needs to be sent in 'encrypted' events in MetadataLoaded().
  EncryptionInfo mPendingEncryptedInitData;

  // True if the media's channel's download has been suspended.
  bool mDownloadSuspendedByCache = false;

  // Disable the video playback by track selection. This flag might not be
  // enough if we ever expand the ability of supporting multi-tracks video
  // playback.
  bool mDisableVideo = false;

  RefPtr<TextTrackManager> mTextTrackManager;

  RefPtr<AudioTrackList> mAudioTrackList;

  RefPtr<VideoTrackList> mVideoTrackList;

  UniquePtr<MediaStreamTrackListener> mMediaStreamTrackListener;

  // The principal guarding mVideoFrameContainer access when playing a
  // MediaStream.
  nsCOMPtr<nsIPrincipal> mSrcStreamVideoPrincipal;

  // True if UnbindFromTree() is called on the element.
  // Note this flag is false when the element is in a phase after creation and
  // before attaching to the DOM tree.
  bool mUnboundFromTree = false;

  // True if the autoplay media was blocked because it hadn't loaded metadata
  // yet.
  bool mBlockedAsWithoutMetadata = false;

  // This promise is used to notify MediaElementAudioSourceNode that media
  // element is allowed to play when MediaElement is used as a source for web
  // audio.
  MozPromiseHolder<GenericNonExclusivePromise> mAllowedToPlayPromise;

  // True if media has ever been blocked for autoplay, it's used to notify front
  // end to show the correct blocking icon when the document goes back from
  // bfcache.
  bool mHasEverBeenBlockedForAutoplay = false;

  // Helper class to measure times for playback telemetry stats
  class TimeDurationAccumulator {
    TimeDurationAccumulator() : mCount(0) {}
    void Start() {
      if (IsStarted()) {
      mStartTime = TimeStamp::Now();
    void Pause() {
      if (!IsStarted()) {
      mSum += (TimeStamp::Now() - mStartTime);
      mStartTime = TimeStamp();
    bool IsStarted() const { return !mStartTime.IsNull(); }
    double Total() const {
      if (!IsStarted()) {
        return mSum.ToSeconds();
      // Add current running time until now, but keep it running.
      return (mSum + (TimeStamp::Now() - mStartTime)).ToSeconds();
    uint32_t Count() const {
      if (!IsStarted()) {
        return mCount;
      // Count current run in this report, without increasing the stored count.
      return mCount + 1;
    void Reset() {
      mStartTime = TimeStamp();
      mSum = TimeDuration();
      mCount = 0;

    TimeStamp mStartTime;
    TimeDuration mSum;
    uint32_t mCount;

  already_AddRefed<PlayPromise> CreatePlayPromise(ErrorResult& aRv) const;

  void UpdateHadAudibleAutoplayState();

  virtual void MaybeBeginCloningVisually(){};

   * This function is called by AfterSetAttr and OnAttrSetButNotChanged.
   * It will not be called if the value is being unset.
   * @param aNamespaceID the namespace of the attr being set
   * @param aName the localname of the attribute being set
   * @param aNotify Whether we plan to notify document observers.
  void AfterMaybeChangeAttr(int32_t aNamespaceID, nsAtom* aName, bool aNotify);

  // Total time a video has spent playing.
  TimeDurationAccumulator mPlayTime;

  // Total time a video has spent playing while hidden.
  TimeDurationAccumulator mHiddenPlayTime;

  // Total time a video has (or would have) spent in video-decode-suspend mode.
  TimeDurationAccumulator mVideoDecodeSuspendTime;

  // Total time a video has spent playing on the current load, it would be reset
  // when media aborts the current load; be paused when the docuemt enters the
  // bf-cache and be resumed when the docuemt leaves the bf-cache.
  TimeDurationAccumulator mCurrentLoadPlayTime;

  // True if media has ever been blocked by autoplay policy before.
  bool mHasPlayEverBeenBlocked = false;

  // Report the Telemetry about whether media played over the specific time
  // threshold.
  void ReportPlayedTimeAfterBlockedTelemetry();

  // True if Init() has been called after construction
  bool mInitialized = false;

  // True if user has called load(), seek() or element has started playing
  // before. It's *only* use for checking autoplay policy
  bool mIsBlessed = false;

  // True if the first frame has been successfully loaded.
  bool mFirstFrameLoaded = false;

  // Media elements also have a default playback start position, which must
  // initially be set to zero seconds. This time is used to allow the element to
  // be seeked even before the media is loaded.
  double mDefaultPlaybackStartPosition = 0.0;

  // True if media element has been marked as 'tainted' and can't
  // participate in video decoder suspending.
  bool mHasSuspendTaint = false;

  // True if media element has been forced into being considered 'hidden'.
  // For use by mochitests. Enabling pref ""
  bool mForcedHidden = false;

  // True if audio tracks and video tracks are constructed and added into the
  // track list, false if all tracks are removed from the track list.
  bool mMediaTracksConstructed = false;

  Visibility mVisibilityState = Visibility::UNTRACKED;

  UniquePtr<ErrorSink> mErrorSink;

  // This wrapper will handle all audio channel related stuffs, eg. the
  // operations of tab audio indicator, Fennec's media control. Note:
  // mAudioChannelWrapper might be null after GC happened.
  RefPtr<AudioChannelAgentCallback> mAudioChannelWrapper;

  // A list of pending play promises. The elements are pushed during the play()
  // method call and are resolved/rejected during further playback steps.
  nsTArray<RefPtr<PlayPromise>> mPendingPlayPromises;

  // A list of already-dispatched but not yet run
  // nsResolveOrRejectPendingPlayPromisesRunners.
  // Runners whose Run() method is called remove themselves from this list.
  // We keep track of these because the load algorithm resolves/rejects all
  // already-dispatched pending play promises.

  // A pending seek promise which is created at Seek() method call and is
  // resolved/rejected at AsyncResolveSeekDOMPromiseIfExists()/
  // AsyncRejectSeekDOMPromiseIfExists() methods.
  RefPtr<dom::Promise> mSeekDOMPromise;

  // For debugging bug 1407148.
  void AssertReadyStateIsNothing();

  // Contains the unique id of the sink device and the device info.
  // The initial value is ("", nullptr) and the default output device is used.
  // It can contain an invalid id and info if the device has been
  // unplugged. It can be set to ("", nullptr). It follows the spec attribute:
  // Read/Write from the main thread only.
  Pair<nsString, RefPtr<AudioDeviceInfo>> mSink;

// Check if the context is chrome or has the debugger or tabs permission
bool HasDebuggerOrTabsPrivilege(JSContext* aCx, JSObject* aObj);

}  // namespace dom
}  // namespace mozilla

#endif  // mozilla_dom_HTMLMediaElement_h