Bug 345846 - cvs remove unused Linux installer files, r+a=ted, don't panic about your orange locale tinderbox, he'll fix it tomorrow if you don't get to it first=axel
authorphilringnalda@gmail.com
Tue, 08 Apr 2008 22:21:37 -0700
changeset 14109 ef297a246113382a66c66ca4526ec17f97a7b63f
parent 14108 2b64f24106a898fd96393597bcccf638f152098b
child 14110 8270db40f2a288ba0ab0eb4f6f68176f80d86945
push idunknown
push userunknown
push dateunknown
bugs345846
milestone1.9pre
Bug 345846 - cvs remove unused Linux installer files, r+a=ted, don't panic about your orange locale tinderbox, he'll fix it tomorrow if you don't get to it first=axel
browser/installer/unix/Makefile.in
browser/installer/unix/ab-CD.jst
browser/installer/unix/abe.jst
browser/installer/unix/adt.jst
browser/installer/unix/browser.jst
browser/installer/unix/config.it
browser/installer/unix/header.png
browser/installer/unix/installer.cfg
browser/installer/unix/talkback.jst
browser/installer/unix/watermark.png
browser/installer/unix/xpcom.jst
browser/locales/en-US/installer/installer.inc
browser/makefiles.sh
toolkit/locales/en-US/installer/unix/install.it
deleted file mode 100644
--- a/browser/installer/unix/Makefile.in
+++ /dev/null
@@ -1,88 +0,0 @@
-# ***** BEGIN LICENSE BLOCK *****
-# Version: MPL 1.1/GPL 2.0/LGPL 2.1
-#
-# The contents of this file are subject to the Mozilla Public License Version
-# 1.1 (the "License"); you may not use this file except in compliance with
-# the License. You may obtain a copy of the License at
-# http://www.mozilla.org/MPL/
-#
-# Software distributed under the License is distributed on an "AS IS" basis,
-# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
-# for the specific language governing rights and limitations under the
-# License.
-#
-# The Original Code is the Mozilla Browser code.
-#
-# The Initial Developer of the Original Code is
-# IBM Corporation.
-# Portions created by the Initial Developer are Copyright (C) 2004
-# the Initial Developer. All Rights Reserved.
-#
-# Contributor(s):
-#  Brian Ryner <bryner@brianryner.com>
-#
-# Alternatively, the contents of this file may be used under the terms of
-# either the GNU General Public License Version 2 or later (the "GPL"), or
-# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
-# in which case the provisions of the GPL or the LGPL are applicable instead
-# of those above. If you wish to allow use of your version of this file only
-# under the terms of either the GPL or the LGPL, and not to allow others to
-# use your version of this file under the terms of the MPL, indicate your
-# decision by deleting the provisions above and replace them with the notice
-# and other provisions required by the GPL or the LGPL. If you do not delete
-# the provisions above, a recipient may use your version of this file under
-# the terms of any one of the MPL, the GPL or the LGPL.
-#
-# ***** END LICENSE BLOCK *****
-
-DEPTH		= ../../..
-topsrcdir	= @top_srcdir@
-srcdir		= @srcdir@
-VPATH		= @srcdir@
-
-include $(DEPTH)/config/autoconf.mk
-
-include $(topsrcdir)/toolkit/mozapps/installer/package-name.mk
-
-CONFIG_DIR = $(shell pwd)/instgen
-ABS_topsrcdir = $(shell cd $(topsrcdir) && pwd)
-ABS_depth = $(shell cd $(DEPTH) && pwd)
-
-LOCALIZED_FILES = \
-	install.it \
-	$(NULL)
-
-PP_LOCALIZED_FILES = \
-	packages-static \
-	installer.cfg \
-	config.it \
-	$(NULL)
-
-INSTALLER_FILES = \
-	abe.jst \
-	adt.jst \
-	browser.jst \
-	talkback.jst \
-	xpcom.jst \
-	$(NULL)
-
-AB_CD = $(MOZ_UI_LOCALE)
-
-DEFINES += -DAB_CD=$(AB_CD) -DPKG_BASENAME=$(PKG_BASENAME) -DMOZ_APP_VERSION=$(MOZ_APP_VERSION) -DMOZ_APP_NAME=$(MOZ_APP_NAME)
-
-installer:
-	$(NSINSTALL) -D instgen
-	$(INSTALL) $(addprefix $(topsrcdir)/toolkit/locales/$(AB_CD)/installer/unix/,$(LOCALIZED_FILES)) $(addprefix $(srcdir)/,$(INSTALLER_FILES)) instgen
-	$(EXIT_ON_ERROR) \
-	for i in $(PP_LOCALIZED_FILES); do \
-	  $(PERL) $(topsrcdir)/config/preprocessor.pl $(DEFINES) $(ACDEFINES) -I$(topsrcdir)/browser/locales/$(AB_CD)/installer/installer.inc $(srcdir)/$$i > instgen/$$i; \
-	done
-	$(PERL) $(topsrcdir)/config/preprocessor.pl $(DEFINES) $(ACDEFINES) -I$(topsrcdir)/browser/locales/$(AB_CD)/defines.inc $(srcdir)/ab-CD.jst > instgen/$(AB_CD).jst
-ifndef MOZ_BRANDING_DIRECTORY
-	$(NSINSTALL) -D $(DIST)/install
-	cp $(srcdir)/header.png $(DIST)/install/header.png
-	cp $(srcdir)/watermark.png $(DIST)/install/watermark.png
-endif
-	$(PERL) $(topsrcdir)/toolkit/mozapps/installer/build_static.pl -config $(CONFIG_DIR) -objdir $(ABS_depth) -srcdir $(ABS_topsrcdir)
-
-include $(topsrcdir)/config/rules.mk
deleted file mode 100644
--- a/browser/installer/unix/ab-CD.jst
+++ /dev/null
@@ -1,72 +0,0 @@
-#filter substitution
-
-var srDest = $SpaceRequired$;
-var err;
-var fProgram;
-var platformNode;
-var searchPlugins = "searchplugins";
-
-platformNode = getPlatform();
-if (platformNode == 'mac') {
-  searchPlugins = "Search Plugins";
-}
-logComment("initInstall: platformNode=" + platformNode);
-// end
-// end - OS type detection
-
-var prettyName = "@AB_CD@ Language Pack";
-var chromeNode = "@AB_CD@";
-
-var regName    = "locales/mozilla/" + chromeNode;
-var chromeName = chromeNode + ".jar";
-var localeName = "locale/" + chromeNode + "/";
-
-err = initInstall(prettyName, regName, "$Version$"); 
-logComment("initInstall: " + err);
-
-fProgram = getFolder("Program");
-logComment("fProgram: " + fProgram);
-
-if (verifyDiskSpace(fProgram, srDest))
-{
-    var chromeType = LOCALE;
-    var fTarget;
-
-    err = addDirectory("",
-                       "bin",
-                       fProgram,
-                       "");
-    logComment("addDirectory() returned: " + err);
-
-    setPackageFolder(fProgram);
- 
-    // check return value
-    if (err == SUCCESS)
-    {
-        fTarget = getFolder("Program", "defaults");
-        logComment("fTarget: " + fTarget);
-        err = addDirectory("",
-                           "bin/defaults", // dir name in JAR to extract
-                           fTarget,        // Where to put this file
-                           "");            // subdir name relative to fProgram
-        logComment("addDirectory() returned: " + err);
-
-        fTarget = getFolder("Program", searchPlugins);
-        logComment("fTarget: " + fTarget);
-        err = addDirectory("",
-                           "bin/searchplugins",
-                           fTarget,
-                           "");
-        logComment("addDirectory() returned: " + err);
-
-        err = performInstall(); 
-        logComment("performInstall() returned: " + err);
-    }
-    else
-    {
-        cancelInstall(err);
-        logComment("cancelInstall due to error: " + err);
-    }
-}
-else
-    cancelInstall(INSUFFICIENT_DISK_SPACE);
deleted file mode 100644
deleted file mode 100644
--- a/browser/installer/unix/adt.jst
+++ /dev/null
@@ -1,14 +0,0 @@
-var err = initInstall("Developer Tools", "Developer Tools", "$Version$"); 
-logComment("initInstall: " + err);
-
-// DOM Inspector
-var fProgram = getFolder("Program");
-logComment("fProgram: " + fProgram);
-
-err = addDirectory("", "$Version$", "bin", fProgram, "", true);
-logComment("addDirectory: " + err);
-
-if (err==SUCCESS)
-    performInstall(); 
-else
-    cancelInstall(err);
deleted file mode 100644
--- a/browser/installer/unix/browser.jst
+++ /dev/null
@@ -1,118 +0,0 @@
-function upgradeCleanup()
-{
-  // Get rid of Chrome directory cruft.
-  deleteThisFolder("Chrome",      "classic");
-  deleteThisFolder("Chrome",      "comm");
-  deleteThisFolder("Chrome",      "en-mac");
-  deleteThisFile("Chrome",        "en-mac.jar");
-  deleteThisFolder("Chrome",      "en-unix");
-  deleteThisFile("Chrome",        "en-unix.jar");
-  deleteThisFolder("Chrome",      "en-US");
-  deleteThisFolder("Chrome",      "en-win");
-  deleteThisFile("Chrome",        "en-win.jar");
-  deleteThisFolder("Chrome",      "US");
-  deleteThisFile("Chrome",        "help.jar");
-
-  deleteThisFile("Chrome",        "chrome.rdf");
-  deleteThisFile("Chrome",        "installed-chrome.txt");
-  deleteThisFile("Chrome",        "app-chrome.manifest");
-  deleteThisFolder("Chrome",      "overlayinfo");
-
-  // Remove defunct components and type libraries
-  deleteThisFile("Components",    "typeaheadfind.xpt");
-  deleteThisFile("Components",    "chrome.xpt");
-  deleteThisFile("Components",    "ipcd.xpt");
-  deleteThisFile("Components",    "nsUpdateNotifier.js");
-  deleteThisFile("Components",    "nsBackgroundUpdateService.js");
-  deleteThisFile("Components",    "p3p.xpt");
-  deleteThisFile("Components",    "prefmigr.xpt");
-  deleteThisFile("Components",    "profilesharingsetup.xpt");
-  deleteThisFile("Components",    "related.xpt");
-  deleteThisFile("Components",    "ucnative.xpt");
-  deleteThisFile("Components",    "util.xpt");
-  deleteThisFile("Components",    "compreg.dat");
-  deleteThisFile("Components",    "xpti.dat");
-
-  // Remove non-linked xpt files for rev'd interfaces; this prevents a
-  // conflict if you had previously installed a zip build in the app directory.
-  deleteThisFile("Components",    "autocomplete.xpt");
-  
-  // Remove defunct defaults files. 
-  deleteThisFile("Program",	      "defaults/pref/all.js");
-  deleteThisFile("Program",	      "defaults/pref/editor.js");
-  deleteThisFile("Program",	      "defaults/pref/mailnews.js");
-  deleteThisFile("Program",	      "defaults/pref/non-shared.txt");
-  deleteThisFile("Program",	      "defaults/pref/security-prefs.js");
-  deleteThisFile("Program",	      "defaults/pref/unix.js");
-  deleteThisFile("Program",	      "defaults/pref/xpinstall.js");
-  deleteThisFile("Program",	      "defaults/pref/bug307259.js");
-  deleteThisFile("Program",	      "defaults/profile/panels.rdf");
-  deleteThisFolder("Program",	    "defaults/profile/US");
-  
-  // Delete dictionary.com search plugin  
-  deleteThisFile("Program",     "searchplugins/dictionary.src");
-  deleteThisFile("Program",     "searchplugins/dictionary.png");
-
-  // These files are related to app patches and will interfere with the 
-  // UA/app version strings if we do not remove them. 
-  deleteThisFile("Program",	    "defaults/pref/bug259708.js");
-  
-  // Remove defunct miscellany
-  deleteThisFolder("Program",     "ipc");
-  deleteThisFile("Program",       "mangle");
-  deleteThisFile("Program",       "mozipcd");
-  deleteThisFile("Program",       "regchrome");
-  deleteThisFile("Program",       "regxpcom");
-  deleteThisFile("Program",       "shlibsign");
-}
-
-var srDest = $SpaceRequired$;
-
-var err = initInstall("$ProductName$", "Browser", "$Version$"); 
-logComment("initInstall: " + err);
-
-var communicatorFolder = getFolder("Program");
-logComment("communicatorFolder: " + communicatorFolder);
-
-if (verifyDiskSpace(communicatorFolder, srDest))
-{
-    // Call upgradeCleanup() before addDirectory() in case we accidentaly
-    // delete files that we happen to be also installing.  This way, if we do,
-    // it will just get reinstalled.  This is for safety measure.
-    upgradeCleanup();
-    err = addDirectory("Program",
-                       "$Version$",
-                       "bin",              // jar source folder
-                       communicatorFolder, // target folder
-                       "",                 // target subdir 
-                       true );             // force flag 
-
-    logComment("addDirectory() returned: " + err);
-
-    // create the plugins folder next to mozilla 
-    var pluginsFolder = getFolder("Plugins");
-    var ignoreErr = dirCreate(pluginsFolder);
-    logComment("dirCreate() returned: " + ignoreErr);
-
-    if (err==SUCCESS)
-    {
-	    err = performInstall(); 
-	    logComment("performInstall() returned: " + err);
-        if (! ('buildID' in Install))
-        {
-          logComment("Running Pre-Mozilla 0.9.1");
-          initInstall("Post-install Cleanup Utility", "Browser/xpicleanup", "$Version$");
-          cleanupUtility = getFolder(communicatorFolder, "xpicleanup");
-          err = File.execute(cleanupUtility);
-          logComment("execute() returned: " + err);
-          err = performInstall();
-        }
-    }
-    else
-    {
-	    cancelInstall(err);
-	    logComment("cancelInstall() due to error: " + err);
-    }
-}
-else
-    cancelInstall(INSUFFICIENT_DISK_SPACE);
deleted file mode 100644
--- a/browser/installer/unix/config.it
+++ /dev/null
@@ -1,1174 +0,0 @@
-#filter substitution
-
-[General]
-; Run Mode values:
-;   Normal - Shows all dialogs.  Requires user input.
-;   Auto   - Shows some dialogs, but none requiring user input.  It will
-;            automatically install the product using default values.
-;   Silent - Show no dialogs at all.  It will install product using default
-;            values.
-Run Mode=Normal
-
-Company Name=$CompanyName$
-Product Name=$ProductName$
-Product NameInternal=$ProductName$
-User Agent=$UserAgent$
-
-; Destination Path values:
-;   PROGRAMFILESDIR
-;   WINDISK
-;   WINDIR
-;   WINSYSDIR
-Path=[PROGRAMFILESDIR]\$ProductName$
-Default Location=/usr/local/$MainExeFile$
-
-; Sub Path, when set will indicate to Setup to create a subfolder from
-; what is offered to the user to change.  It will not be shown to the user
-; but simply created:
-;
-; ie: shown to user   : [Path]
-;     actually created: [Path]\[Sub Path]
-;     (where [Path] is the Path= key above)
-Sub Path=
-
-; Controls the Browse button that allows the user to 
-; change the destination path of the product.
-; Default value is FALSE;
-Lock Path=FALSE
-
-Program Name=$MainExeFile$
-
-; Program Folder Path values:
-;   COMMON_STARTUP
-;   COMMON_PROGRAMS
-;   COMMON_STARTMENU
-;   COMMON_DESKTOP
-;
-;   PERSONAL_STARTUP
-;   PERSONAL_PROGRAMS
-;   PERSONAL_STARTMENU
-;   PERSONAL_DESKTOP
-;
-;   PERSONAL_APPDATA
-;   PERSONAL_CACHE
-;   PERSONAL_COOKIES
-;   PERSONAL_FAVORITES
-;   PERSONAL_FONTS
-;   PERSONAL_HISTORY
-;   PERSONAL_NETHOOD
-;   PERSONAL_PERSONAL
-;   PERSONAL_PRINTHOOD (supported only under Windows NT)
-;   PERSONAL_RECENT
-;   PERSONAL_SENDTO
-;   PERSONAL_TEMPLATES
-;
-;   PROGRAMS (Default value is the same as COMMON_PROGRAMS, but if the user
-;             has restricted access to the system, then it's the same as
-;             PERSONAL_PROGRAMS)
-;
-;   PROGRAMFILESDIR
-;   COMMONFILESDIR
-;   MEDIAPATH
-;   CONFIGPATH (supported only under Windows95 and Windows98)
-;   DEVICEPATH
-Program Folder Name=$ProductName$
-Program Folder Path=[PROGRAMS]
-
-Uninstall Filename=$UninstallFile$
-
-; This key is used as a fail over key.  This url will be used when the
-; url in the Site Selector fails.
-url=$ArchiveUrl$
-
-; Default Setup Type values:
-;   Setup Type 0 - first radio button (easy install)
-;   Setup Type 1 - second radio button (custom)
-Default Setup Type=Setup Type 0
-
-; Forces the icons on the system to be refreshed.
-; Default value is FALSE.
-; Possible values:
-;   FALSE
-;   TRUE
-Refresh Icons=FALSE
-
-; Setting to control whether or not GRE should be installed to app's dir
-; to be used as a private/local GRE.
-;
-; Possible values (default is 'Shared'):
-;   Local
-;   Shared
-;
-; If this key is set to 'Local', make
-; sure to provide a GRE Private Key= below!
-GRE Type=Shared
-GRE ID=$GreUniqueID$
-
-; Private key that overrides the default shared key
-; (HKEY_LOCAL_MACHINE\Software\mozilla.org\GRE) set by GRE's installer.
-; This key will be created under HKEY_LOCAL_MACHINE and should be 
-; declared in the following format:
-;
-;   Software\[company name]\[product name]
-;   (ie: Software\mozilla.org\GRE_1.4a_0000000000_PRIVATE)
-;
-; If it is not in the above format, the GRE installer/uninstaller can
-; fail to work properly.
-; The value to Prodduct Name Internal= (at the beginning of this
-; config.ini file) will be appended as follows:
-;
-;   Software\mozilla.org\GRE_1.4a_0000000000_PRIVATE_[Product Name Internal]
-GRE Private Key=Software\mozilla.org\GRE_$GreUniqueID$_PRIVATE_$ProductNameInternal$
-
-; Controls the display of the banner image in the download and install progress dialogs.
-; Default value is TRUE.
-Show Banner Image=TRUE
-Header Image=header.png
-
-; Controls the check to see if user is installing on top of a previous
-; installation of the product. If so, then prompt the user that cleanup
-; of destination folder is highly recommended, or instability of product
-; can occurr.
-[Cleanup On Upgrade]
-Cleanup=TRUE
-ObjectToIgnore0=plugins
-ObjectToIgnore1=uninstall
-ObjectToIgnore2=install_status.log
-
-; List of files/dirs that is used to determine if a directory is a profile
-; or not.  This is so the directory is not deleted as part of the Cleanup
-; On Upgrade.
-; All of the object files must be found in order for a dir to be assumed
-; to be a Profile dir.
-[Profile Dir Object List]
-Object0=chrome
-Object1=bookmarks.html
-Object2=localstore.rdf
-
-; This section contains info on how to send error information in case of
-; either a download or xpinstall error.
-; By default, this feature is enabled, unless disabled.
-[Message Stream]
-; Values:
-;   Enabled
-;   Disabled
-;   default is Enabled.
-Status=Disabled
-
-; URL to cgi script to send error information to.  The information will
-; be appended to the url in the form of parameters to the cgi script.
-url=http://orb.mcom.com/install/error.cgi
-
-; Indicates whether to show a confirmation dialog or not.  If this
-; dialog is not shown, the error information will be *automatically*
-; sent without any indication to the user unless the Status= is set
-; to Disabled.
-;
-; Default value is TRUE if nothing is set.
-Show Confirmation=TRUE
-Confirmation Message=There was an error encountered during installation of $ProductName$.  The following information will be sent back to us to help us improve the product: %s
-
-
-
-; HKey:              valid decryptable setup key is [Product CurrentVersion] or [Product PreviousVersion]
-; Decrypt HKey:      there are times when '[' and ']' are valid part of windows registry key names.
-; Contains Filename: tells setup that the path contains filename needed to be removed before
-;                    using it as a path.
-; Verify Existence:  FILE or PATH
-;
-[Locate Previous Product Path0]
-HRoot=HKEY_LOCAL_MACHINE
-HKey=[Product CurrentVersion]\Main
-Name=Install Directory
-Decrypt HKey=TRUE
-Contains Filename=FALSE
-Verify Existence=
-
-[Dialog Welcome]
-Show Dialog=TRUE
-Title=@SETUP_TITLE@
-MessageWelcome=@SETUP_WELCOME@
-Message0=@SETUP_MESSAGE0@
-Message1=@SETUP_MESSAGE1_UNIX@
-Message2=@SETUP_MESSAGE2@
-Message3=@SETUP_MESSAGE3@
-Watermark=watermark.png
-
-[Dialog License]
-Show Dialog=TRUE
-Title=@LICENSE_TITLE@
-Sub Title=@LICENSE_SUBTITLE@
-License File=license.txt
-Message0=@LICENSE_MESSAGE0@
-RadioAccept=@LICENSE_ACCEPT@
-RadioDecline=@LICENSE_DECLINE@
-
-[Dialog Setup Type]
-Show Dialog=TRUE
-Title=@SETUP_TYPE_TITLE@
-Sub Title=@SETUP_TYPE_SUBTITLE@
-Message0=@SETUP_TYPE_MESSAGE0@
-MessageExistingInstall=@SETUP_TYPE_EXISTING@
-
-; at least one Setup Type needs to be set, and up to 4 can be
-; set (Setup Type0, Setup Type1, Setup Type2, Setup Type3).
-[Setup Type0]
-Description Short=@TYPE_STANDARD@
-Description Long=@TYPE_STANDARD_DESC@
-
-; List of components to install/enable for this Setup Type.
-; All other components not listed here will be disabled if
-; this Setup Type is selected.
-C0=Component XPCOM
-C1=Component Browser
-;C2=Component Uninstaller
-C2=Component Langpack
-; Make sure Component QFA is LAST so 3rd party developers who might not want
-; this component can easily remove it.
-C3=Component QFA
-
-[Setup Type1]
-Description Short=@TYPE_CUSTOM@
-Description Long=@TYPE_CUSTOM_DESC@
-
-; List of components to install/enable for this Setup Type.
-; All other components not listed here will be disabled if
-; this Setup Type is selected.
-C0=Component XPCOM
-C1=Component Browser
-C2=Component ADT
-;C3=Component Uninstaller
-C3=Component Langpack
-; Make sure Component QFA is LAST so 3rd party developers who might not want
-; this component can easily remove it.
-C4=Component QFA
-
-[Dialog Select Components]
-Show Dialog=TRUE
-Title=@SELECT_TITLE@
-Sub Title=@SELECT_SUBTITLE@
-Message0=@SELECT_MESSAGE0@
-
-[Dialog Select Install Path]
-Show Dialog=TRUE
-Title=@LOCATION_TITLE@
-Sub Title=@LOCATION_SUBTITLE@
-Message0=@LOCATION_MESSAGE0@
-
-[Dialog Upgrade]
-Show Dialog=FALSE
-Show In Easy Install=FALSE
-Title=@UPGRADE_TITLE@
-Sub Title=@UPGRADE_SUBTITLE@
-Message Cleanup=@UPGRADE_CLEANUP@
-; XXXben - we need a strategy for uninstallation that obviates the need for "Safe Upgrade" which can doing nasty things if you have installed the app into a stupid location.
-
-Checkbox Clean Install=@UPGRADE_CLEAN@
-Message Clean Install=@UPGRADE_CLEAN_MSG@
-Message Install Over=@UPGRADE_OVER@
-Message Install Over Windir=@UPGRADE_OVER_WINDIR@
-; xxxbsmedberg this doesn't make sense in the unix installer
-
-[Dialog Select Additional Components]
-Show Dialog=FALSE
-Title=@ADD_TITLE@
-Message0=@ADD_MESSAGE0@
-
-[Dialog Windows Integration]
-; Note - this dialog isn't actually used yet!
-Show Dialog=TRUE
-Title=@WININT_TITLE@
-Sub Title=@WININT_SUBTITLE@
-Message0=@WININT_MESSAGE0@
-
-; Only a maximum of 4 "Windows Integration-Item"s are allowed.  Each Item
-; shows up as a checkbox in the Windows Integration dialog.
-[Windows Integration-Item0]
-CheckBoxState=TRUE
-Description=@WININT_DESKTOP@
-Archive=
-
-[Windows Integration-Item1]
-CheckBoxState=TRUE 
-;*** LOCALIZE ME BABY ***
-Description=@WININT_START@
-Archive=
-
-[Windows Integration-Item2]
-CheckBoxState=TRUE
-;*** LOCALIZE ME BABY ***
-Description=@WININT_QUICKL@
-Archive=
-
-[Windows Integration-Item3]
-CheckBoxState=TRUE
-Description=@USE_AS_DEFAULT@
-Archive=
-
-[Dialog Program Folder]
-Show Dialog=TRUE
-Title=@WININT_PFOLDER_TITLE@
-Message0=@WININT_PFOLDER_MESSAGE0@
-
-[Dialog Additional Options]
-Show Dialog=TRUE
-Title=@ADDL_OPTIONS_TITLE@
-Message1=@ADDL_OPTIONS_MSG1@
-Save Installer=
-; The following settings control whether the Recapture Homepage checkbox is displayed.
-;    For this option to work the file nsResetPref.js must be installed into the 
-;    components directory
-Message0=The following checkbox gives users the option of reverting to
-the default home page
-Show Homepage Option=FALSE
-Recapture Homepage=FALSE
-
-[Dialog Advanced Settings]
-Show Dialog=TRUE
-Title=@ADV_SETTINGS_TITLE@
-Message0=@ADV_SETTINGS_MSG@
-Proxy Server=
-Proxy Port=
-Proxy User=
-Proxy Password=
-; Use Protocol accepts only two options:
-;   FTP
-;   HTTP
-; Default is FTP if key is not set.
-Use Protocol=HTTP
-; Use Protocol Settings key shows or hides the
-; Use FTP/Use HTTP radio buttons in the Download Dialog.
-; Default value is ENABLED unless DISABLED is specified.
-Use Protocol Settings=ENABLED
-; Controls the radio buttons visibility
-; Default value is TRUE
-Show Protocols=TRUE
-
-[Dialog Quick Launch]
-Show Dialog=TRUE
-;*** LOCALIZE ME BABY ***
-Title=$ProductName$ Setup - Quick Launch
-;*** LOCALIZE ME BABY ***
-Message0=Quick Launch starts Mozilla faster by keeping portions of the program in computer memory.
-;*** LOCALIZE ME BABY ***
-Message1=You can access Quick Launch through the icon on the Windows taskbar tray.
-;*** LOCALIZE ME BABY ***
-Message2=Check the box below to activate Quick Launch when you restart your computer.
-; Turbo Mode (Quick Launch) values: TRUE, FALSE
-; Defaults to FALSE if not set
-Turbo Mode=FALSE
-; Turbo Mode Settings value: TRUE, FALSE
-; Defaults to FALSE if not set.
-; This will hide the turbo mode checkbox in the Start Install dialog
-; and ignore the Turbo Mode= key, thus disabling it.
-Turbo Mode Enabled=TRUE
-
-[Dialog Start Install]
-Show Dialog=TRUE
-Title=@START_TITLE@
-Sub Title=@START_SUBTITLE@
-Message Install=@START_INSTALL@
-Message Download=@START_DOWNLOAD@
-Message0=@START_MESSAGE0@
-XPInstall Engine=xpcom.xpi
-
-[Dialog Downloading]
-Show Dialog=TRUE
-Title=@DL_TITLE@
-Sub Title=@DL_SUBTITLE@
-Blurb=@DL_BLURB@
-File Name=@DL_FILENAME@
-Time Remaining=@DL_TIMELEFT@
-
-[Dialog Installing]
-Show Dialog=TRUE
-Title=@INSTALL_TITLE@
-Sub Title=@INSTALL_SUBTITLE@
-Blurb=@INSTALL_BLURB@
-Status File=@INSTALL_STATUSFILE@
-Status Component=@INSTALL_STATUSCOMP@
-
-[Dialog Install Successful]
-Show Dialog=TRUE
-Title=@COMPLETE_TITLE@
-MessageHeader=@COMPLETE_TITLE@
-Message0=@COMPLETE_MESSAGE0@
-Message1=@COMPLETE_MESSAGE1@
-Launch App=@COMPLETE_LAUNCH@
-Launch App Checked=TRUE
-
-[Dialog Download]
-Show Dialog=TRUE
-Title=@DL2_TITLE@
-Message Download0=@DL2_MESSAGE0@
-Message Retry0=@DL2_RETRY@
-
-[Dialog Reboot]
-; Show Dialog values are:
-;   TRUE  - Always show
-;   FALSE - Don't show unless at least one component has its reboot show value set
-;           to TRUE.  This will not show even if some files were in use and a reboot
-;           is necessary.
-;   AUTO  - Don't show unless a component has its reboot show value set to
-;           TRUE or there was at least one file in use and a reboot is
-;           is required for the file to be replaced correctly.
-Show Dialog=AUTO
-
-[Check Instance0]
-Class Name=MozillaMessageWindow
-Window Name=
-Process Name=$MainExeFile$
-Pretty Name=$ProductNameInternal$
-Message=@CLOSE_CHECK@
-Message Full Installer=@CLOSE_CHECK2@
-Message wait=@CLOSE_WAIT@
-
-; This key indicates whether or not to close all the windows associated with
-; the process id of this app instance window found.
-Close All Process Windows=TRUE
-
-; These keys are not normally necessary for checking instances.  They are
-; set here because Mozilla requires a way to shut down it's turbo mode.
-Extra Cmd0 Reg Key Root=HKEY_LOCAL_MACHINE
-Extra Cmd0 Reg Key=Software\Microsoft\Windows\CurrentVersion\App Paths\$MainExeFile$
-Extra Cmd0 Reg Name=
-Extra Cmd0 Parameter=-kill
-
-[Check Instance1]
-Class Name=Netscape6MessageWindow
-Window Name=
-Process Name=Netscp.exe
-Pretty Name=Netscape
-;*** LOCALIZE ME BABY ***
-Message=Download of $ProductName$ was successful. However, Netscape must be closed to proceed with this installation. Click OK to exit Netscape automatically and to begin installation.
-;*** LOCALIZE ME BABY ***
-Message Full Installer=Netscape must be closed to proceed with this installation. Click OK to exit Netscape automatically and to begin installation.
-;*** LOCALIZE ME BABY ***
-Message wait=Shutting down Netscape.  Please wait…
-
-; This key indicates whether or not to close all the windows associated with
-; the process id of this app instance window found.
-Close All Process Windows=TRUE
-
-; These keys are not normally necessary for checking instances.  They are
-; set here because Netscape 6 requires a way to shut down it's turbo mode.
-; This will stop at the first one that succeeds (key and file found).
-Extra Cmd0 Reg Key Root=HKEY_LOCAL_MACHINE
-Extra Cmd0 Reg Key=Software\Microsoft\Windows\CurrentVersion\App Paths\Netscp6.exe
-Extra Cmd0 Reg Name=
-Extra Cmd0 Parameter=-kill
-
-Extra Cmd1 Reg Key Root=HKEY_LOCAL_MACHINE
-Extra Cmd1 Reg Key=Software\Microsoft\Windows\CurrentVersion\App Paths\Netscp.exe
-Extra Cmd1 Reg Name=
-Extra Cmd1 Parameter=-kill
-
-
-;DependeeX=Component A means
-;  - if Component A gets checked this component gets checked
-;  - if Component A gets unchecked this component gets unchecked
-;  - if this component is visible it can still be checked/unchecked
-;      independantly after Component A has changed its state.  I.e
-;      this components checkbox will not be disabled or hidden.
-;Dependee0=
-;
-;DependencyX= is not supported at this time. 
-;Dependency0=
-;
-; Attributes can be the following values:
-;
-;   The following Attributes can be overridden:
-;   ------------------------------------------
-;
-;   SELECTED      - Component is selected to be installed by default.
-;
-;   UNSELECTED    - Component is to be displayed unselected in the Options
-;                   dialog.  If the component is listed in the non-custom
-;                   Setup Type section, it will be assumed to be selected
-;                   by default.
-;
-;   ADDITIONAL    - Component is to be shown in the Additional Options
-;                   dialog (2nd Options dialog) instead of the 1st Options
-;                   dialog.
-;
-;   NOTADDITIONAL - Component will be shown (if visible) in the 1st
-;                   1st Options dialog rather than the Additional Options
-;                   dialog (default).
-;
-;   VISIBLE       - Component is shown in one of the two Options dialogs
-;                   (default).
-;
-;   INVISIBLE     - Component is not shown in either of the two Options dialogs.
-;
-;   ENABLED       - Component is to be shown as enabled (not greyed out) in
-;                   either of the two Options dialogs.
-;                   (default).
-;
-;   DISABLED      - Component is to be shown as disabled (greyed out) in
-;                   either of two Options dialog.
-;
-;
-;   The following attributes cannot be overridden:
-;   ---------------------------------------------
-;
-;   LAUNCHAPP     - Component is downloaded and simply run (like a .exe file)
-;                   after all the components have been downloaded and
-;                   xpinstall'ed.
-;
-;   DOWNLOAD_ONLY - Component is to be only downloaded to the ns_temp folder,
-;                   then deleted as Setup is quitting.
-;
-;   FORCE_UPGRADE - Force Upgrade checks for a particular file or directory
-;                   provided in the Force Upgrade FileX= key(s).  If any of
-;                   the listed file or directory exists, then this component
-;                   will have its SELECTED and DISABLED Attributes set
-;                   automatically.  Force Upgrade will override the following:
-;
-;                       Random Install Percentage= setting
-;                       UNSELECTED Attribute setting
-;                       Dependency settings
-;                       Dependee settings
-;                       Setup Type settings - meaning that even if this
-;                                             component is not listed in the
-;                                             selected Setup Type, it will be
-;                                             affected.
-;
-;   IGNORE_DOWNLOAD_ERROR  - If the component needs to be downloaded from a
-;                            server, setting this attribute will indicate that
-;                            any download error encountered will be ignored
-;                            and treated as if there were no error.
-;                            If the component does not need to be downloaded,
-;                            then this attribute has no effect.
-;
-;   IGNORE_XPINSTALL_ERROR - If the component is a .xpi file, then any error
-;                            resulting from the installation of the .xpi file
-;                            will be ignored.  If the .xpi file is not to be
-;                            installed, then this attribute is ignored.
-;
-;   SUPERSEDE     - Component is to be shown as disabled and unselected
-;                   if a file exists.
-;                   Use SupersedeType=File Exists to specify the type of comparison
-;                   Use SupersedeFileX=File Name to specify the file
-;                   Use SupersedeMinVersionX=a.b.c.d (optional) to specify the 
-;                   minimum version of the file.  If the version of the existing file
-;                   is greater than or equal to the SupersedeMinVersion the component
-;                   will be superseded.
-;
-
-;We're not installing Component XPCOM because we're using it
-;for it's xpinstall engine from the TEMP dir.  The files that
-;this component has are already in Component GRE.
-[Component XPCOM]
-Description Short=@XPCOM_SHORT@
-Description Long=@XPCOM_SHORT@
-Archive=xpcom.xpi
-$InstallSize$:xpcom
-$InstallSizeSystem$
-$InstallSizeArchive$:xpcom.xpi
-Attributes=SELECTED|INVISIBLE
-FileCount=$FileCount$
-
-[Component Browser]
-Description Short=@BROWSER_SHORT@
-Description Long=@BROWSER_SHORT@
-Archive=browser.xpi
-$InstallSize$:browser
-$InstallSizeSystem$
-$InstallSizeArchive$:browser.xpi
-Attributes=SELECTED|INVISIBLE|FORCE_UPGRADE|MAIN_COMPONENT
-Force Upgrade File0=[SETUP PATH]\$MainExeFile$
-FileCount=$FileCount$
-
-[Component ADT]
-Description Short=@ADT_SHORT@
-Description Long=@ADT_LONG@
-Archive=adt.xpi
-$InstallSize$:adt
-$InstallSizeSystem$
-$InstallSizeArchive$:adt.xpi
-Attributes=FORCE_UPGRADE|VISIBLE
-;Force Upgrade File0=[SETUP PATH]\chrome\venkman.jar
-Force Upgrade File0=[SETUP PATH]\chrome\inspector.jar
-FileCount=$FileCount$
-
-[Component Uninstaller]
-Description Short=@UNINSTALL_SHORT@
-Description Long=@UNINSTALL_SHORT@
-Archive=$UninstallFileZip$
-$InstallSize$:$UninstallFileZip$
-$InstallSizeSystem$
-$InstallSizeArchive$:$UninstallFileZip$
-Attributes=SELECTED|INVISIBLE|DOWNLOAD_ONLY
-FileCount=$FileCount$
-
-;Since the uninstaller program is going to be installed into the Windows folder,
-;Setup.exe needs to know to calculate the disk space required for the Windows folder.
-;This section overrides the default user-chosen path for the Uninstaller only.
-[Component Uninstaller-Destination Path0]
-Path=[WINDIR]
-
-[Component Langpack]
-Description Short=@AB_CD@ @LANGPACK_TITLE@
-Description Long=@AB_CD@ @LANGPACK_TITLE@
-Archive=@AB_CD@.xpi
-$InstallSize$:@AB_CD@
-$InstallSizeSystem$
-$InstallSizeArchive$:@AB_CD@.xpi
-Attributes=SELECTED|INVISIBLE|FORCE_UPGRADE
-Force Upgrade File0=[SETUP PATH]\chrome\@AB_CD@.jar
-FileCount=$FileCount$
-
-[Component QFA]
-Description Short=@QFA_SHORT@
-Description Long=@QFA_LONG@
-Archive=talkback.xpi
-$InstallSize$:talkback
-$InstallSizeSystem$
-$InstallSizeArchive$:talkback.xpi
-Attributes=SELECTED|FORCE_UPGRADE
-Force Upgrade File0=[SETUP PATH]\components\fullsoft.dll
-FileCount=$FileCount$
-; This is to randomly set the default checkbox for this component.
-; This particular value will set the checkbox checked [number]% of the time.
-; This logic is done only during the initialization of setup, not in any
-; particular dialog.
-Random Install Percentage=100
-
-[Core]
-Source=[XPI PATH]\xpcom.xpi
-Destination=[WIZTEMP]\xpcom.ns
-$InstallSize$:xpcom
-Cleanup=TRUE
-Message=@CORE_PREPARING@
-; Status= values: Disabled, Enabled
-; If nothing is set, default value is Enabled.  If set to Disabled,
-; it will then use GRE as the xpinstall engine, in which case, there
-; should be a GRE component in this installer package!
-Status=Enabled
-
-[Redirect]
-Status=Disabled
-; This is used in conjunction with the Site Selector info to build a
-; url to where to download the needed redirect.ini file from.
-; If there's more than one server path, they will be used as fail
-; over paths.
-;
-; The Server Path= keys need to be named in the following convention:
-;
-;   Server Path0=
-;   Server Path1=
-;   Server Path2=
-;
-; and so on...
-Server Path=redirect.ini
-;*** LOCALIZE ME BABY ***
-Description=Redirect File
-Message=
-
-
-; The Timing key needs to be one of the following values:
-;   pre download     - process before any files have been downloaded.
-;   post download    - process after all files have been downloaded.
-;   pre xpcom        - process before the xpcom file has been uncompressed.
-;   post xpcom       - process after the xpcom file has been uncompressed.
-;   pre smartupdate  - process before the smartupdate engine has been launched.
-;   post smartupdate - process after the smartupdate engine has been launched.
-;   pre launchapp    - process before the launching of executables.
-;   post launchapp   - process after the launching of executables.
-;   pre archive      - process before the launching of each individual archive file.
-;   post archive     - process after the launching of each individual archive file.
-;   depend reboot    - process depending on if a reboot is necessary or not.
-;                      if reboot is necessary, installer can set it up so
-;                      the app runs once upon windows reboot.
-
-;Uncompress FileX sections
-[Uncompress File0]
-Timing=post smartupdate
-Source=[XPI PATH]\$UninstallFileZip$
-Destination=[WINDIR]
-;*** LOCALIZE ME BABY ***
-Message=@INST_UNINST@
-Only If Exists=FALSE
-
-
-;Copy FileX sections
-;Copy the uninstaller to the [Setup Path]\uninstall folder.
-;This copy is to be used when the user installed on a system with
-;restricted access.
-[Copy File0]
-Timing=post smartupdate
-Source=[WINDIR]\$UninstallFile$
-Destination=[SETUP PATH]\uninstall
-Fail If Exists=FALSE
-Do Not Uninstall=FALSE
-
-[Copy File1]
-Timing=post smartupdate
-Source=[XPI PATH]\$UninstallFile$
-Destination=[WINDIR]
-Fail If Exists=FALSE
-Do Not Uninstall=TRUE
-
-; nss3.dll, softokn3.dll, ssl3.dll, and smime3.dll all need to be copied from
-; the GRE dir to the destination app folder (see bug 202326)
-[Copy File2]
-Timing=post smartupdate
-Source=[$GRE_INSTALL_DIR]\nss3.dll
-Destination=[SETUP PATH]
-Fail If Exists=FALSE
-Do Not Uninstall=FALSE
-
-[Copy File3]
-Timing=post smartupdate
-Source=[$GRE_INSTALL_DIR]\softokn3.dll
-Destination=[SETUP PATH]
-Fail If Exists=FALSE
-Do Not Uninstall=FALSE
-
-[Copy File4]
-Timing=post smartupdate
-Source=[$GRE_INSTALL_DIR]\softokn3.chk
-Destination=[SETUP PATH]
-Fail If Exists=FALSE
-Do Not Uninstall=FALSE
-
-[Copy File5]
-Timing=post smartupdate
-Source=[$GRE_INSTALL_DIR]\ssl3.dll
-Destination=[SETUP PATH]
-Fail If Exists=FALSE
-Do Not Uninstall=FALSE
-
-[Copy File6]
-Timing=post smartupdate
-Source=[$GRE_INSTALL_DIR]\smime3.dll
-Destination=[SETUP PATH]
-Fail If Exists=FALSE
-Do Not Uninstall=FALSE
-
-[Copy File7]
-Timing=post smartupdate
-Source=[$GRE_INSTALL_DIR]\freebl3.dll
-Destination=[SETUP PATH]
-Fail If Exists=FALSE
-Do Not Uninstall=FALSE
-
-[Copy File8]
-Timing=post smartupdate
-Source=[$GRE_INSTALL_DIR]\freebl3.chk
-Destination=[SETUP PATH]
-Fail If Exists=FALSE
-Do Not Uninstall=FALSE
-
-[Copy File9]
-Timing=post smartupdate
-Source=[$GRE_INSTALL_DIR]\nssutil3.dll
-Destination=[SETUP PATH]
-Fail If Exists=FALSE
-Do Not Uninstall=FALSE
-
-[Path Lookup $GRE_INSTALL_DIR]
-Path Reg Key Root=HKEY_LOCAL_MACHINE
-Path Reg Key=Software\mozilla.org\GRE\$GreUniqueID$\Main
-Path Reg Name=Install Directory
-Strip Filename=FALSE
-
-
-;Copy File SequentialX sections
-[Copy File Sequential0]
-Timing=post smartupdate
-Filename=install_wizard.log
-Source=[SETUP PATH]
-Destination=[SETUP PATH]\uninstall
-
-
-;Create DirectoryX sections
-[Create Directory0]
-Timing=post download
-Destination=[SETUP PATH]\plugins
-
-
-;Delete FileX sections
-[Delete File0]
-Timing=post download
-Destination=[COMMON_PROGRAMS]\Mozilla Seamonkey\Mozilla AppRunner.lnk
-
-[Delete File1]
-Timing=post smartupdate
-Destination=[SETUP PATH]\install_wizard.log
-
-
-;Remove DirectoryX sections
-;[Remove Directory0]
-;Timing=post launchapp
-;Destination=[TEMP]\xtratest
-;Remove subdirs=TRUE
-
-
-;RunAppX sections
-[RunApp0]
-Timing=depend reboot
-Wait=FALSE
-;Target=[SETUP PATH]\$MainExeFile$
-Target=$MainExeFile$
-Parameters=-installer
-WorkingDir=[SETUP PATH]
-;  Additional Options dialog.
-Condition=not RecaptureHPChecked
-
-[Windows Registry0]
-Root Key=HKEY_LOCAL_MACHINE
-;*** LOCALIZE ME BABY ***
-Key=Software\$CompanyName$
-Name=
-Name Value=
-Type=REG_SZ
-Decrypt Key=FALSE
-Decrypt Name=FALSE
-Decrypt Name Value=TRUE
-Overwrite Key=TRUE
-Overwrite Name=TRUE
-Timing=pre smartupdate
-
-[Windows Registry1]
-Root Key=HKEY_LOCAL_MACHINE
-;*** LOCALIZE ME BABY ***
-Key=Software\$CompanyName$\$ProductName$
-Name=
-Name Value=
-Type=REG_SZ
-Decrypt Key=FALSE
-Decrypt Name=FALSE
-Decrypt Name Value=TRUE
-Overwrite Key=TRUE
-Overwrite Name=TRUE
-Timing=pre smartupdate
-
-[Windows Registry2]
-Root Key=HKEY_LOCAL_MACHINE
-;*** LOCALIZE ME BABY ***
-Key=Software\$CompanyName$\$ProductName$\$UserAgent$
-Name=
-Name Value=
-Type=REG_SZ
-Decrypt Key=FALSE
-Decrypt Name=FALSE
-Decrypt Name Value=TRUE
-Overwrite Key=TRUE
-Overwrite Name=TRUE
-Timing=pre smartupdate
-
-[Windows Registry3]
-Root Key=HKEY_LOCAL_MACHINE
-;*** LOCALIZE ME BABY ***
-Key=Software\$CompanyName$\$ProductName$\$UserAgent$\Main
-Name=Program Folder Path
-Name Value=[Default Folder]
-Type=REG_SZ
-Decrypt Key=FALSE
-Decrypt Name=FALSE
-Decrypt Name Value=TRUE
-Overwrite Key=TRUE
-Overwrite Name=TRUE
-Timing=pre smartupdate
-
-[Windows Registry4]
-Root Key=HKEY_LOCAL_MACHINE
-;*** LOCALIZE ME BABY ***
-Key=Software\$CompanyName$\$ProductName$\$UserAgent$\Uninstall
-Name=Description
-Name Value=$ProductName$ ($UserAgentShort$)
-Type=REG_SZ
-Decrypt Key=FALSE
-Decrypt Name=FALSE
-Decrypt Name Value=FALSE
-Overwrite Key=TRUE
-Overwrite Name=TRUE
-Timing=pre smartupdate
-
-[Windows Registry5]
-Root Key=HKEY_LOCAL_MACHINE
-;*** LOCALIZE ME BABY ***
-Key=Software\$CompanyName$\$ProductName$\$UserAgent$\Uninstall
-Name=Uninstall Log Folder
-Name Value=[SETUP PATH]\uninstall
-Type=REG_SZ
-Decrypt Key=FALSE
-Decrypt Name=FALSE
-Decrypt Name Value=TRUE
-Overwrite Key=TRUE
-Overwrite Name=TRUE
-Timing=pre smartupdate
-
-[Windows Registry6]
-Root Key=HKEY_CURRENT_USER
-;*** LOCALIZE ME BABY ***
-Key=Software\$CompanyName$
-Name=
-Name Value=
-Type=REG_SZ
-Decrypt Key=FALSE
-Decrypt Name=FALSE
-Decrypt Name Value=TRUE
-Overwrite Key=TRUE
-Overwrite Name=TRUE
-Timing=pre smartupdate
-
-[Windows Registry7]
-Root Key=HKEY_CURRENT_USER
-;*** LOCALIZE ME BABY ***
-Key=Software\$CompanyName$\$ProductName$
-Name=
-Name Value=
-Type=REG_SZ
-Decrypt Key=FALSE
-Decrypt Name=FALSE
-Decrypt Name Value=TRUE
-Overwrite Key=TRUE
-Overwrite Name=TRUE
-Timing=pre smartupdate
-
-[Windows Registry8]
-Root Key=HKEY_CURRENT_USER
-;*** LOCALIZE ME BABY ***
-Key=Software\$CompanyName$\$ProductName$\$UserAgent$
-Name=
-Name Value=
-Type=REG_SZ
-Decrypt Key=FALSE
-Decrypt Name=FALSE
-Decrypt Name Value=TRUE
-Overwrite Key=TRUE
-Overwrite Name=TRUE
-Timing=pre smartupdate
-
-[Windows Registry9]
-Root Key=HKEY_CURRENT_USER
-;*** LOCALIZE ME BABY ***
-Key=Software\$CompanyName$\$ProductName$\$UserAgent$\Main
-Name=Program Folder Path
-Name Value=[Default Folder]
-Type=REG_SZ
-Decrypt Key=FALSE
-Decrypt Name=FALSE
-Decrypt Name Value=TRUE
-Overwrite Key=TRUE
-Overwrite Name=TRUE
-Timing=pre smartupdate
-
-[Windows Registry10]
-Root Key=HKEY_CURRENT_USER
-;*** LOCALIZE ME BABY ***
-Key=Software\$CompanyName$\$ProductName$\$UserAgent$\Uninstall
-Name=Description
-Name Value=$ProductName$ ($UserAgentShort$)
-Type=REG_SZ
-Decrypt Key=FALSE
-Decrypt Name=FALSE
-Decrypt Name Value=FALSE
-Overwrite Key=TRUE
-Overwrite Name=TRUE
-Timing=pre smartupdate
-
-[Windows Registry11]
-Root Key=HKEY_CURRENT_USER
-;*** LOCALIZE ME BABY ***
-Key=Software\$CompanyName$\$ProductName$\$UserAgent$\Uninstall
-Name=Uninstall Log Folder
-Name Value=[SETUP PATH]\uninstall
-Type=REG_SZ
-Decrypt Key=FALSE
-Decrypt Name=FALSE
-Decrypt Name Value=TRUE
-Overwrite Key=TRUE
-Overwrite Name=TRUE
-Timing=pre smartupdate
-
-[Windows Registry12]
-Root Key=HKEY_LOCAL_MACHINE
-Key=Software\Microsoft\Windows\CurrentVersion\Uninstall\$ProductName$ ($UserAgentShort$)
-Name=DisplayName
-Name Value=$ProductName$ ($UserAgentShort$)
-Type=REG_SZ
-Decrypt Key=FALSE
-Decrypt Name=FALSE
-Decrypt Name Value=FALSE
-Overwrite Key=TRUE
-Overwrite Name=TRUE
-Timing=post smartupdate
-
-[Windows Registry13]
-Root Key=HKEY_LOCAL_MACHINE
-Key=Software\Microsoft\Windows\CurrentVersion\Uninstall\$ProductName$ ($UserAgentShort$)
-Name=UninstallString
-;*** LOCALIZE ME BABY ***
-Name Value=[WINDIR]\$UninstallFile$ /ua "$UserAgent$"
-Type=REG_SZ
-Decrypt Key=FALSE
-Decrypt Name=FALSE
-Decrypt Name Value=TRUE
-Overwrite Key=TRUE
-Overwrite Name=TRUE
-Timing=post smartupdate
-
-; The following keys are to help JRE's installer locate where mozilla gets
-; installed to.  It has not been updated to look for the new keys.
-[Windows Registry14]
-Root Key=HKEY_LOCAL_MACHINE
-Key=Software\Mozilla
-Name=
-Name Value=
-Type=REG_SZ
-Decrypt Key=FALSE
-Decrypt Name=FALSE
-Decrypt Name Value=TRUE
-Overwrite Key=TRUE
-Overwrite Name=TRUE
-Timing=pre smartupdate
-
-[Cleanup Previous Product RegKeys]
-Reg Key Root0=HKEY_LOCAL_MACHINE
-Product Name0=Mozilla
-Product Reg Key0=Software\Mozilla.org\Mozilla
-Current Version0=$UserAgent$
-
-Reg Key Root1=HKEY_CURRENT_USER
-Product Name1=Mozilla
-Product Reg Key1=Software\Mozilla.org\Mozilla
-Current Version1=$UserAgent$
-
-
-
-; Values for Show Folder:
-;   HIDE             Hides the window and activates another window.
-;   MAXIMIZE         Maximizes the specified window.
-;   MINIMIZE         Minimizes the specified window and activates the next
-;                    top-level window in the z-order.
-;   RESTORE          Activates and displays the window. If the window is
-;                    minimized or maximized, Windows restores it to its
-;                    original size and position. An application should specify
-;                    this flag when restoring a minimized window.
-;   SHOW             Activates the window and displays it in its current size
-;                    and position.
-;   SHOWMAXIMIZED    Activates the window and displays it as a maximized
-;                    window.
-;   SHOWMINIMIZED    Activates the window and displays it as a minimized
-;                    window.
-;   SHOWMINNOACTIVE  Displays the window as a minimized window. The active
-;                    window remains active.
-;   SHOWNA           Displays the window in its current state. The active
-;                    window remains active.
-;   SHOWNOACTIVATE   Displays a window in its most recent size and position.
-;                    The active window remains active.
-;   SHOWNORMAL       Activates and displays a window. If the window is
-;                    minimized or maximized, Windows restores it to its
-;                    original size and position. An application should specify
-;                    this flag when displaying the window for the first time.
-[Program Folder0]
-Timing=post smartupdate
-Show Folder=HIDE
-Program Folder=[Default Folder]
-
-[Program Folder0-Shortcut0]
-File=[SETUP PATH]\uninstall\$UninstallFile$
-Arguments=/ua "$UserAgent$"
-Working Dir=[SETUP PATH]
-Description=Uninstall $ProductName$
-Icon Path=[SETUP PATH]\uninstall\$UninstallFile$
-Icon Id=0
-
-; Default value:
-;    IGNORE
-;
-; Possible values:
-;    ONLY_RESTRICTED    - create shortcut only if user access is restricted
-;    ONLY_NONRESTRICTED - create shortcut only if user access is not restricted
-Restricted Access=ONLY_RESTRICTED
-
-;[Program Folder0-Shortcut1]
-;File=[SETUP PATH]\$MainExeFile$
-;Arguments=-ProfileManager
-;Working Dir=[SETUP PATH]
-;Description=Profile Manager
-;Icon Path=[SETUP PATH]\$MainExeFile$
-;Icon Id=0
-
-;[Program Folder0-Shortcut2]
-;File=[SETUP PATH]\bin\Net2fone.exe
-;Arguments=
-;Working Dir=[SETUP PATH]
-;Description=Net2Fone
-;Icon Path=[SETUP PATH]\bin\Net2fone.exe
-;Icon Id=0
-
-;[Program Folder1]
-;Timing=post download
-;Show Folder=SHOW
-;Program Folder=[Default Folder]\lala land
-
-;[Program Folder1-Shortcut0]
-;File=c:\bin\getver.exe
-;Arguments=
-;Working Dir=[TEMP]
-;Description=Getver Test
-;Icon Path=[WINDISK]\4nt\4nt.exe
-;Icon Id=0
-
-;[Program Folder1-Shortcut1]
-;File=c:\perl\bin\perl.exe
-;Arguments=
-;Working Dir=[WINSYS]
-;Description=Perl
-;Icon Path=c:\perl\bin\perl.exe
-;Icon Id=0
-
-[Strings]
-Message Unfinished Download Restart=@MSG_UNFINISHED_DL@
-Message Unfinished Install Xpi Restart=@MSG_UNFINISHED_INSTALL@
-Error Corrupted Archives Detected=@MSG_CORRUPTED@
-Error Corrupted Archives Detected AUTO mode=@MSG_CORRUPTED_AUTO@
-Error Too Many CRC Failures=@MSG_TOO_MANY_CRC@
-Error Too Many Network Errors=@MSG_TOO_MANY_NETWORK@
-Message Verifying Archives=@MSG_VERIFYING@
-Error Undefined=@MSG_UNDEFINED@
-Error Out Of Memory=@MSG_OOM@
-Status Download=@MSG_STATUS_DL@
-Status Retry=@MSG_STATUS_DL@
-Status File Info=%s
-Status Percentage Completed=%d%%
-Dialog Download Title Minimized=@MSG_COMPLETED@
-STR Force Upgrade Required=@MSG_REQUIRED@
-Message Cancel Setup AUTO mode=@MSG_CANCELING@
-Error File Uncompress=@MSG_ERROR_UNCOMPRESS@
-UsageMsg Usage=@MSG_USAGE@
-IDC Use FTP=@MSG_USE_FTP@
-IDC Use HTTP=@MSG_USE_HTTP@
-IDC Save Installer Files=@MSG_SAVE_LOCALLY@
-;*** LOCALIZE ME BABY ***
-IDC Recapture Homepage=&Make Netscape.com my home page
-;*** LOCALIZE ME BABY ***
-IDC Turbo Mode=&Use Quick Launch for faster startup times when possible
-Message Download Paused=@MSG_DL_PAUSED@
-Message NORMAL Restricted Access=@MSG_NOT_ADMIN@
-Message AUTO Restricted Access=@MSG_NOT_ADMIN_AUTO@
-
-
-[Site Selector]
-; Dictates whether or not to show the pull down menu.
-; Default value is SHOW.
-; If Status= is set to HIDE, then Identifier0 will be used
-; and all other IdentifiersX will be ignored.
-Status=HIDE
-
-Identifier0=Site0
-;*** LOCALIZE ME BABY ***
-Description0=Default
-;*** LOCALIZE ME BABY ***
-Domain0=$ArchiveUrl$
-
-Identifier1=Site1
-;*** LOCALIZE ME BABY ***
-Description1=North America
-;*** LOCALIZE ME BABY ***
-Domain1=$ArchiveUrl$
-
deleted file mode 100644
index 963e72abbce123c8f1d87432db42f02f0a71c12e..0000000000000000000000000000000000000000
GIT binary patch
literal 0
Hc$@<O00001
deleted file mode 100644
--- a/browser/installer/unix/installer.cfg
+++ /dev/null
@@ -1,14 +0,0 @@
-#filter substitution
-VersionLanguage           = @AB_CD@
-NameCompany               = Mozilla
-NameProduct               = Minefield
-NameProductInternal       = Minefield
-ShortNameProduct          = Minefield
-VersionProduct            = @MOZ_APP_VERSION@
-FileInstallerEXE          = @PKG_BASENAME@.installer
-FileMainEXE               = @MOZ_APP_NAME@
-FileUninstall             = UninstallFirefox
-FileUninstallZIP          = UninstallFirefox.zip
-FileInstallerNETRoot      = @PKG_BASENAME@.net-installer
-ComponentList             = xpcom,browser,talkback,@AB_CD@,adt
-LicenseFile               = browser/EULA
deleted file mode 100644
--- a/browser/installer/unix/talkback.jst
+++ /dev/null
@@ -1,127 +0,0 @@
-// this function verifies disk space in kilobytes
-function verifyDiskSpace(dirPath, spaceRequired)
-{
-  var spaceAvailable;
-
-  // Get the available disk space on the given path
-  spaceAvailable = fileGetDiskSpaceAvailable(dirPath);
-
-  // Convert the available disk space into kilobytes
-  spaceAvailable = parseInt(spaceAvailable / 1024);
-
-  // do the verification
-  if(spaceAvailable < spaceRequired)
-  {
-    logComment("Insufficient disk space: " + dirPath);
-    logComment("  required : " + spaceRequired + " K");
-    logComment("  available: " + spaceAvailable + " K");
-    return(false);
-  }
-
-  return(true);
-}
-
-// this function deletes a file if it exists
-function deleteThisFile(dirKey, file)
-{
-  var fFileToDelete;
-
-  fFileToDelete = getFolder(dirKey, file);
-  logComment("File to delete: " + fFileToDelete);
-  if(File.isFile(fFileToDelete))
-  {
-    File.remove(fFileToDelete);
-    return(true);
-  }
-  else
-    return(false);
-}
-
-// this function deletes a folder if it exists
-function deleteThisFolder(dirKey, folder, recursiveDelete)
-{
-  var fToDelete;
-
-  if(typeof recursiveDelete == "undefined")
-    recursiveDelete = true;
-
-  fToDelete = getFolder(dirKey, folder);
-  logComment("Folder to delete: " + fToDelete);
-  if(File.isDirectory(fToDelete))
-  {
-    File.dirRemove(fToDelete, recursiveDelete);
-    return(true);
-  }
-  else
-    return(false);
-}
-
-// OS type detection
-// which platform?
-function getPlatform()
-{
-  var platformStr;
-  var platformNode;
-
-  if('platform' in Install)
-  {
-    platformStr = new String(Install.platform);
-
-    if (!platformStr.search(/^Macintosh/))
-      platformNode = 'mac';
-    else if (!platformStr.search(/^Win/))
-      platformNode = 'win';
-    else
-      platformNode = 'unix';
-  }
-  else
-  {
-    var fOSMac  = getFolder("Mac System");
-    var fOSWin  = getFolder("Win System");
-
-    logComment("fOSMac: "  + fOSMac);
-    logComment("fOSWin: "  + fOSWin);
-
-    if(fOSMac != null)
-      platformNode = 'mac';
-    else if(fOSWin != null)
-      platformNode = 'win';
-    else
-      platformNode = 'unix';
-  }
-
-  return platformNode;
-}
-
-var srDest = $SpaceRequired$;
-
-var err = initInstall("Quality Feedback Agent", "Quality Feedback Agent", "$Version$"); 
-logComment("initInstall: " + err);
-
-var communicatorFolder = getFolder("Program");
-logComment("communicatorFolder: " + communicatorFolder);
-
-if (verifyDiskSpace(communicatorFolder, srDest))
-{
-    err = addDirectory("Program",
-                       "$Version$",
-                       "bin",              // jar source folder 
-                       communicatorFolder, // target folder 
-                       "",                 // target subdir 
-                       true );             // force flag 
-
-    logComment("addDirectory() returned: " + err);
-
-    if (err==SUCCESS)
-    {
-	    err = performInstall(); 
-	    logComment("performInstall() returned: " + err);
-    }
-    else
-    {
-	    cancelInstall(err);
-	    logComment("cancelInstall() returned: " + err);
-    }
-}
-else
-    cancelInstall(INSUFFICIENT_DISK_SPACE);
deleted file mode 100644
index ab08dffbeb11189a0a6327315038c6c0edc30745..0000000000000000000000000000000000000000
GIT binary patch
literal 0
Hc$@<O00001
deleted file mode 100644
--- a/browser/installer/unix/xpcom.jst
+++ /dev/null
@@ -1,48 +0,0 @@
-function upgradeCleanup()
-{
-  // Obsolete files from Netscape 6.0 and Netscape 6.01 that
-  // need to be cleaned up.
-  deleteThisFile("Program",    "component.reg");
-  deleteThisFile("Program",    "libjsdom.so");
-  deleteThisFile("Program",    "libz.so");
-  deleteThisFile("Components", "compreg.dat");
-  deleteThisFile("Components", "xpti.dat");
-  deleteThisFile("Components", "xptitemp.dat");
-}
-
-var srDest = $SpaceRequired$;
-
-var err = initInstall("Mozilla XPCOM", "XPCOM", "$Version$"); 
-logComment("initInstall: " + err);
-
-var communicatorFolder = getFolder("Program");
-logComment("communicatorFolder: " + communicatorFolder);
-
-if (verifyDiskSpace(communicatorFolder, srDest))
-{
-    // Call upgradeCleanup() before addDirectory() in case we accidentaly
-    // delete files that we happen to be also installing.  This way, if we do,
-    // it will just get reinstalled.  This is for safety measure.
-    upgradeCleanup();
-    err = addDirectory("Program",
-                       "$Version$",
-                       "bin",              // jar source folder 
-                       communicatorFolder, // target folder 
-                       "",                 // target subdir 
-                       true );             // force flag 
-
-    logComment("addDirectory() returned: " + err);
-
-    if (err==SUCCESS)
-    {
-	    err = performInstall(); 
-	    logComment("performInstall() returned: " + err);
-    }
-    else
-    {
-	    cancelInstall(err);
-	    logComment("cancelInstall() returned: " + err);
-    }
-}
-else
-    cancelInstall(INSUFFICIENT_DISK_SPACE);
deleted file mode 100644
--- a/browser/locales/en-US/installer/installer.inc
+++ /dev/null
@@ -1,193 +0,0 @@
-#filter emptyLines
-
-# This file is in the UTF-8 encoding
-
-# Installer keys (don't translate strings in $$)
-#define SETUP_TITLE $ProductShortName$ Setup
-#define SETUP_WELCOME Welcome to %s
-#define SETUP_MESSAGE0 You are about to install %s.
-#define SETUP_MESSAGE1 It is strongly recommended that you exit all Windows programs before running this Setup program.
-#define SETUP_MESSAGE1_UNIX It is strongly recommended that you exit all instances of %s before running this Setup program.
-#define SETUP_MESSAGE2 Click Cancel to quit Setup and then close any programs you have running.  Click Next to continue the Setup program.
-#define SETUP_MESSAGE3 Click Next to continue installing %s.
-
-#define LICENSE_TITLE Software License Agreement
-#define LICENSE_SUBTITLE Terms and conditions for using this software.
-#define LICENSE_MESSAGE0 Please read the following license agreement. Use the scroll bar to view the rest of this agreement.
-#define LICENSE_ACCEPT I &Accept the terms of the License Agreement
-#define LICENSE_DECLINE I do NO&T Accept the terms of the License Agreement
-
-#define SETUP_TYPE_TITLE Setup Type
-#define SETUP_TYPE_SUBTITLE Choose setup options.
-#define SETUP_TYPE_MESSAGE0 Choose the type of Setup you prefer, then click Next.
-#define SETUP_TYPE_EXISTING The selected directory already contains a Firefox installation. To delete %s completely, please press the 'Delete Directory' button. Your Firefox settings should not be affected. Or, please press the 'Cancel' button and choose a different destination directory.
-
-# &Ampersand is used to select a shortcut key
-#define TYPE_STANDARD &Standard
-#define TYPE_STANDARD_DESC Browser will be installed with the most common options.
-
-#define TYPE_CUSTOM &Custom
-#define TYPE_CUSTOM_DESC You may choose individual options to be installed. Recommended for experienced users.
-
-#define SELECT_TITLE Select Components
-#define SELECT_SUBTITLE Additional components that enhance $ProductShortName$.
-#define SELECT_MESSAGE0 Choose additional components you want to install, then click Next.
-
-#define LOCATION_TITLE Install Folder
-#define LOCATION_SUBTITLE Where $ProductShortName$ will be installed.
-#define LOCATION_MESSAGE0 $ProductShortName$ will be installed into the following folder:
-
-#define UPGRADE_TITLE Upgrade
-#define UPGRADE_SUBTITLE Upgrades an existing $ProductShortName$ installation.
-#define UPGRADE_CLEANUP A previous $ProductNameInternal$ installation has been found in the chosen folder.
-
-#define UPGRADE_CLEAN Perform a Clean Install
-#define UPGRADE_CLEAN_MSG A Clean Install will COMPLETELY REMOVE the contents of the install folder! Any third party components you have installed will be lost. This is recommended as it may prevent incompatibilities. (XXXben)
-#define UPGRADE_OVER If you choose not to perform a Clean Install, third party components will not be removed, which may cause unpredictable behavior.
-#define UPGRADE_OVER_WINDIR A Safe Upgrade of $ProductNameInternal$ cannot be performed because the program is installed within the Windows folder. It is recommended that you choose another folder to install $ProductNameInternal$ into.
-
-#define ADD_TITLE $ProductShortName$ Setup - Select Additional Components
-#define ADD_MESSAGE0 Select or clear the additional components you want to install.
-
-#define WININT_TITLE Set Up Shortcuts
-#define WININT_SUBTITLE Creates Program Icons
-#define WININT_MESSAGE0 Create icons for $ProductShortName$:
-
-#define WININT_DESKTOP On my Desktop
-#define WININT_START In my Start Menu Programs folder
-#define WININT_QUICKL In my Quick Launch bar
-
-#define USE_AS_DEFAULT Use %s as my Default Browser.
-
-#define WININT_PFOLDER_TITLE $ProductShortName$ Setup - Select Program Folder
-#define WININT_PFOLDER_MESSAGE0 Setup will add program icons to the Program Folder listed below.  You may type a new folder name, or select one from the Existing Folders list.  Click Next to continue.
-
-#define ADDL_OPTIONS_TITLE $ProductShortName$ Setup - Additional Options
-#define ADDL_OPTIONS_MSG1 Select the following option if you wish to save downloaded Setup files on your own computer.  This allows you to re-run Setup without downloading the files again.  The Setup files will be saved to the path below.
-
-#define ADV_SETTINGS_TITLE $ProductShortName$ Setup - Advanced Settings
-#define ADV_SETTINGS_MSG If your Internet connection requires a proxy server, enter your server name and port information.  If your Internet connection doesn't require a proxy server, leave the fields blank.
-
-#define START_TITLE Summary
-#define START_SUBTITLE Ready to start installing $ProductShortName$.
-#define START_INSTALL Setup will now install the following components:
-#define START_DOWNLOAD Setup will now download and install the following components:
-#define START_MESSAGE0 Click Next to continue.
-
-#define DL_TITLE Downloading
-#define DL_SUBTITLE Downloading required components…
-#define DL_BLURB Setup is downloading the files required to install $ProductShortName$.
-#define DL_FILENAME Currently Downloading:
-#define DL_TIMELEFT Time Remaining:
-
-#define INSTALL_TITLE Installing
-#define INSTALL_SUBTITLE Installing $ProductShortName$…
-#define INSTALL_BLURB Setup is installing application files.
-#define INSTALL_STATUSFILE Preparing File:
-#define INSTALL_STATUSCOMP Currently Installing:
-
-#define COMPLETE_TITLE Install Complete
-#define COMPLETE_MESSAGE0 %s was successfully installed.
-#define COMPLETE_MESSAGE1 Click Finish to complete Setup.
-#define COMPLETE_LAUNCH Launch %s now.
-
-#define DL2_TITLE $ProductShortName$ Setup - Download
-#define DL2_MESSAGE0 Setup is downloading the required files now.  This may take some time depending on your network connection speed.
-#define DL2_RETRY Some files have failed the CRC check and are being downloaded again.  Only those files that have failed will be downloaded.
-
-#define CLOSE_CHECK Download of $ProductShortName$ was successful. $ProductNameInternal$ must be closed to proceed with installation. Click OK to exit $ProductNameInternal$ automatically and to begin installation.
-#define CLOSE_CHECK2 $ProductNameInternal$ must be closed to proceed with installation. Click OK to exit $ProductNameInternal$ automatically and to begin installation.
-#define CLOSE_WAIT Shutting down $ProductNameInternal$.  Please wait…
-
-#define XPCOM_SHORT Cross-Platform COM
-#define BROWSER_SHORT $ProductShortName$ Browser
-#define HELP_SHORT $ProductShortName$ Help
-#define UNINSTALL_SHORT $CompanyName$ Uninstaller
-#define LANGPACK_TITLE Language Pack
-
-#define ADT_SHORT Developer Tools
-#define ADT_LONG The Document Inspector - a tool for web developers.
-
-#define QFA_SHORT Quality Feedback Agent
-#define QFA_LONG for reporting $ProductShortName$ crash information
-
-#define RPT_SHORT Website Reporter
-#define RPT_LONG for reporting $ProductShortName$ website compatibility problems
-
-#define CORE_PREPARING Preparing Install, please wait…
-#define INST_UNINST Installing the uninstaller, please wait…
-
-#define MSG_UNFINISHED_DL A previous session of Setup did not finish downloading all the necessary files.  Would you like to use the files previously downloaded, to avoid downloading them again?
-#define MSG_UNFINISHED_INSTALL A previous session of Setup did not finish with installation of all the necessary files.  Would you like to use the files previously downloaded, to avoid downloading them again?
-#define MSG_CORRUPTED Setup has detected that the following archives within this Setup are corrupted:%sYou will need to obtain another copy of the $ProductShortName$ Setup in order for installation to proceed.
-#define MSG_CORRUPTED_AUTO Setup has detected that at least one archive within this Setup is corrupt.  You will need to obtain another copy of the $ProductShortName$ Setup in order for installation to proceed.
-#define MSG_TOO_MANY_CRC Too many download failures.  Setup will cancel.  Any files already downloaded will not be deleted.  The next time Setup is run, these files will be taken into account during the download.
-#define MSG_TOO_MANY_NETWORK Too many network errors trying to download %s.  Setup will now Pause.  Please click Resume to retry downloading the files.
-#define MSG_VERIFYING Verifying integrity of archives, please wait…
-#define MSG_UNDEFINED Error undefined
-#define MSG_OOM Out of memory!
-#define MSG_STATUS_DL %s at %.2f KB/sec (%u KB of %u KB downloaded)
-#define MSG_COMPLETED %d%% completed
-#define MSG_REQUIRED (Required)
-#define MSG_CANCELING Canceling Setup, please wait…
-#define MSG_ERROR_UNCOMPRESS Error uncompressing file %s: %d
-#define MSG_USAGE Usage: %s [options]\n	[options] can be any of the following combination:\n		-h: This help.\n		-a [path]: Alternate archive search path.\n		-app [app id]: ID of application which is launching the installer (shared installs)\n		-app_path [app]: Points to (full path) representative file of application (Shared installs)\n	*	-dd [path]: Suggested install destination directory. (Shared installs)\n	*	-greLocal: Forces GRE to be installed into the application dir.\n	*	-greShared: Forces GRE to be installed into a global, shared dir (normally)\n			c:\program files\common files\mozilla.org\GRE\n		-reg_path [path]: Where to make entries in the Windows registry. (Shared installs)\n		-f: Force install of GRE installer (Shared installs), though it'll work\n			for non GRE installers too.\n		-greForce: Force 'Component GRE' to be downloaded, run, and installed.  This\n			bypasses GRE's logic of determining when to install by running its\n			installer with a '-f' flag.\n		-n [filename]: Setup's parent process filename.\n	*	-ma: Run setup in Auto mode.\n	*	-ms: Run setup in Silent mode.\n		-ira: Ignore the [RunAppX] sections\n		-ispf: Ignore the [Program FolderX] sections that show\n			the Start Menu shortcut folder at the end of installation.\n	*	-showBanner: Show the banner image in the download and install progress dialogs\n	*	-hideBanner: Hide the banner image in the download and install progress dialogs\n	*	-cleanupOnUpgrade: Tells Setup to check to see if user is upgrading (installing on top\n		of previous version of product).  If user is upgrading:\n			* NORMAL mode: prompt user on how to proceed\n			* All other modes: assume user wants to cleanup.\n	*	-noCleanupOnUpgrade: Tells Setup to not check if user is upgrading (installing on top\n		of previous version of product).  This will disable the cleanup feature.\n\n	* means it will override config.ini
-#define MSG_USE_FTP Use &FTP for downloading files
-#define MSG_USE_HTTP Use &HTTP for downloading files
-#define MSG_SAVE_LOCALLY &Save installer files locally
-#define MSG_DL_PAUSED Setup has encountered a network problem and has paused the download.  If you have just lost your network connection, please click Resume once your network has been reestablished.
-#define MSG_NOT_ADMIN Setup has detected that you do not have the appropriate Administrator privileges to this system.  It is highly recommended that you do not continue with the installation of $ProductShortName$, or it may not function properly.  Would you still like to continue?
-#define MSG_NOT_ADMIN_AUTO Setup has detected that you do not have the appropriate Administrator privileges to this system.  Setup cannot continue with the installation of $ProductShortName$.
-
-#define UNINST_RUNNING $ProductNameInternal$ is detected to be currently running.  Please quit $ProductNameInternal$ before continuing.  Click OK to exit $ProductNameInternal$ automatically and proceed with uninstallation.
-#define UNINST_SHUTDOWN Shutting down $ProductNameInternal$.  Please wait…
-
-#define UNINST_FONT MS Sans Serif
-#define UNINST_FONTSIZE 8
-#define UNINST_CHARSET 0
-# Here is a partial list CHAR_SETS
-#  ANSI_CHARSET = 0
-#  DEFAULT_CHARSET = 1
-#  SYMBOL_CHARSET = 2
-#  SHIFTJIS_CHARSET = 128
-#  GB2312_CHARSET = 134
-#  HANGEUL_CHARSET = 129
-#  CHINESEBIG5_CHARSET = 136
-#  OEM_CHARSET 255
-
-#define UNINST_TITLE $ProductName$ Uninstaller
-#define UNINST_MESSAGE0 Are you sure you want to completely remove %s and all of its components?
-#define BTN_UNINST &Uninstall
-#define BTN_CANCEL &Cancel
-#define BTN_MESSAGE1 Uninstall has detected that the following shared file is no longer used by any programs.  If any programs still require the shared file and it is removed, those programs may no longer function.  Are you sure you want to remove this shared file?
-#define BTN_MESSAGE2 Leaving this file will not harm your system.  If you are not sure, it is recommended that the shared file be not removed from the system.
-#define BTN_FILENAME File name:
-#define BTN_NO &No
-#define BTN_NOTOALL N&o to all
-#define BTN_YES &Yes
-#define BTN_YESTOALL Y&es to all
-
-#define ERROR_DLL_LOAD Could not load %s
-#define ERROR_STRING_LOAD Could not load string resource ID %d
-#define ERROR_STRING_NULL Null pointer encountered.
-#define ERROR_GLOBALALLOC Memory allocation error.
-#define ERROR_FAILED %s failed.
-#define ERROR_DIALOG_CREATE Could not create %s dialog.
-#define DLGQUITTITLE Question
-#define DLGQUITMSG Are you sure you want to cancel?
-#define ERROR_GET_SYSTEM_DIRECTORY_FAILED GetSystemDirectory() failed.
-#define ERROR_GET_WINDOWS_DIRECTORY_FAILED GetWindowsDirectory() failed.
-#define ERROR_CREATE_TEMP_DIR Uninstall was not able to create the TEMP directory: %s
-#define ERROR_SETUP_REQUIREMENT Windows95 or greater Operating System is required!  Exiting Uninstall…
-#define MB_WARNING_STR Warning
-#define ERROR_UNINSTALL_LOG_FOLDER Uninstall log folder not found:%s
-#define MB_MESSAGE_STR Message
-#define DLG_REMOVE_FILE_TITLE Remove File?
-#define ERROR_GETVERSION GetVersionEx() failed!
-#define MB_ATTENTION_STR Attention
-#define MSG_FORCE_QUIT_PROCESS Uninstall has detected that %s (%s) is still running.  Click OK to quit %s and proceed with uninstallation. Alternatively, use the Windows Task Manager to quit %s, and then click OK to continue with uninstallation.
-#define MSG_FORCE_QUIT_PROCESS_FAILED Uninstall will now exit.  Uninstall could not continue because %s (%s) is still running. Try manually quitting %s using Windows Task Manager, and then run Uninstall again.
-#define MSG_DELETE_INSTALLATION_PATH Not all files were uninstalled from the installation directory:\n\n  %s\n\nDo you want to completely delete this directory?
-#define MSG_INSTALLATION_PATH_WITHIN_WINDIR Uninstall has detected that the installation path of $ProductNameInternal$ is installed to a folder within your Windows folder.  Uninstall will not attempt to delete this installation due to the potential removal of critical system files.
-
-#unfilter emptyLines
--- a/browser/makefiles.sh
+++ b/browser/makefiles.sh
@@ -50,17 +50,16 @@ browser/components/places/Makefile
 browser/components/preferences/Makefile
 browser/components/search/Makefile
 browser/components/sidebar/Makefile
 browser/components/sidebar/src/Makefile
 browser/components/shell/Makefile
 browser/components/shell/public/Makefile
 browser/components/shell/src/Makefile
 browser/installer/Makefile
-browser/installer/unix/Makefile
 browser/installer/windows/Makefile
 browser/locales/Makefile
 browser/themes/Makefile
 browser/themes/pinstripe/browser/Makefile
 browser/themes/pinstripe/Makefile
 browser/themes/winstripe/browser/Makefile
 browser/themes/winstripe/Makefile
 "
deleted file mode 100644
--- a/toolkit/locales/en-US/installer/unix/install.it
+++ /dev/null
@@ -1,89 +0,0 @@
-
-[String Resources]
-
-;------------------------------------------------------------------------------
-;   UI strings
-;------------------------------------------------------------------------------
-
-NEXT=Next >
-BACK=< Back
-CANCEL=Cancel
-ACCEPT=Accept
-DECLINE=Decline
-INSTALL=Install
-PAUSE=Pause
-RESUME=Resume
-DEFAULT_TITLE=Mozilla Installer
-DEST_DIR=Destination Directory
-BROWSE=Change…
-SELECT_DIR=Select a directory
-DOESNT_EXIST=Directory %s doesn't exist.  Create it?
-YES_LABEL=Yes
-NO_LABEL=No
-OK_LABEL=OK
-DELETE_LABEL=Delete Directory
-CANCEL_LABEL=Cancel
-ERROR=Error [%d]: %s
-FATAL_ERROR=Fatal error [%d]: %s
-DESCRIPTION=Description
-WILL_INSTALL=Setup will install the following components:
-TO_LOCATION=to the following location:
-PREPARING=Preparing %s…
-EXTRACTING=Extracting %s…
-INSTALLING_XPI=Installing %s…
-PROCESSING_FILE=Processing file %d of %d…
-NO_PERMS=Choose another directory because you do not have permission to install to: %s
-DL_SETTINGS=Download Settings
-SAVE_MODULES=Save installer modules upon download
-PROXY_SETTINGS=Proxy Settings…
-PS_LABEL0=Proxy Host [required]:
-PS_LABEL1=Proxy Port [required]:
-PS_LABEL2=Proxy Username [optional]:
-PS_LABEL3=Proxy Password [optional]:
-ERROR_TITLE=Error!
-DS_AVAIL=Disk Space Available = %ld KB
-DS_REQD=Disk Space Required = %ld KB
-NO_DISK_SPACE=Please select a directory on a disk with enough space to install or free some disk space on the selected disk.
-CXN_DROPPED=A network connection failure occured.  Please check your network connection and press the 'Resume' button.  Alternatively, press the 'Cancel' button to quit the installer.
-CRC_CHECK=Some files failed to download correctly. Retrying.
-CRC_FAILED=Installation has failed due to multiple CRC failures.
-DOWNLOADING=Downloading:
-FROM=From:
-TO=To:
-STATUS=Status:
-DL_STATUS_STR=%d KB  of  %d KB (at %d KB/sec)
-USAGE_MSG=Usage: %s [options]%s	[options] can be any of the following combination:%s		-h:		This help.%s		-ma:		Run setup in Auto mode: show progress UI,%s				but assume defaults without user intervention.%s		-ms:		Run setup in Silent mode: show no UI and have%s				no user intervention.%s		-ira:		Ignore the [RunAppX] sections%s
-UNKNOWN=Unknown
-
-;------------------------------------------------------------------------------
-;   Error strings
-;------------------------------------------------------------------------------
-
--601=Out of memory
--602=Invalid param
--603=Invalid member variable
--604=Invalid pointer
--605=Parse key has no value
--606=Failed to read readme
--607=Failed to read license
--608=Out of bounds in Component/Setup Type list
--609=Mismatched ref counts
--610=No components in the INI file
--611=No setup types in the INI file
--612=URL at this index already exists
--613=Couldn't create the directory
--614=FTP URL malformed
--615=Download failed
--616=Extraction of XPCOM failed
--617=Failed to fork a process
--618=Couldn't open xpistub library
--619=Couldn't get symbol in library
--620=A xpistub call failed
--621=An Installer module %s (.xpi) failed to install
--622=Copy of an installer module (.xpi) failed
--623=Destination directory doesn't exist
--624=Can't make destination directory.  Please try another directory.
--625=A previous installation exists.
--626=Insufficient permission
--627=Insufficient disk space
--628=Multiple CRC Failure