js/tests/mklistpage.pl
author mats.palmgren@bredband.net
Fri, 14 Mar 2008 18:12:13 -0700
changeset 13105 990794df70dae75bc4fac4ffdf49c2917a21e0a0
parent 1879 deebc84992b12eb81df49b063791df38a9017bb6
permissions -rw-r--r--
Block native event processing in the appshell while processing gecko events from a nested native event loop. b=420148 r+sr=roc a=blocking1.9

#!/usr/bin/perl
#
# ***** BEGIN LICENSE BLOCK *****
# Version: MPL 1.1/GPL 2.0/LGPL 2.1
#
# The contents of this file are subject to the Mozilla Public License Version
# 1.1 (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
# http://www.mozilla.org/MPL/
#
# Software distributed under the License is distributed on an "AS IS" basis,
# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
# for the specific language governing rights and limitations under the
# License.
#
# The Original Code is JavaScript Core Tests.
#
# The Initial Developer of the Original Code is
# Netscape Communications Corporation.
# Portions created by the Initial Developer are Copyright (C) 1997-1999
# the Initial Developer. All Rights Reserved.
#
# Contributor(s):
#   Robert Ginda
#   Bob Clary
#
# Alternatively, the contents of this file may be used under the terms of
# either the GNU General Public License Version 2 or later (the "GPL"), or
# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
# in which case the provisions of the GPL or the LGPL are applicable instead
# of those above. If you wish to allow use of your version of this file only
# under the terms of either the GPL or the LGPL, and not to allow others to
# use your version of this file under the terms of the MPL, indicate your
# decision by deleting the provisions above and replace them with the notice
# and other provisions required by the GPL or the LGPL. If you do not delete
# the provisions above, a recipient may use your version of this file under
# the terms of any one of the MPL, the GPL or the LGPL.
#
# ***** END LICENSE BLOCK *****

# Creates the meat of a test suite manager page, requites menuhead.html and menufoot.html
# to create the complete page.  The test suite manager lets you choose a subset of tests
# to run under the runtests2.pl script.

local $lxr_url = "http://lxr.mozilla.org/mozilla/source/js/tests/";
local $suite_path = $ARGV[0] || "./";
local $uid = 0;          # radio button unique ID
local $html = "";        # html output
local $javascript = "";  # script output

#
# automatically exclude spidermonkey-n.tests
# XXXbc better to emulate jsDriver.pl's option processing
#    and allow -L file1 file2 etc.
#
local $excludedtest;
local @excludedlist = expand_user_test_list('spidermonkey-n.tests');
local %excludedhash = {};
foreach $excludedtest (@excludedlist)
{
    $excludedhash{"./" . $excludedtest} = 1;
}

&main;

print (&scriptTag($javascript) . "\n");
print ($html);

sub main {
    local $i, @suite_list;

    if (!($suite_path =~ /\/$/)) {
	$suite_path = $suite_path . "/";
    }

    @suite_list = sort(&get_subdirs ($suite_path));

    $javascript .= "\n";
    $javascript .= "var suites = {};\n";
    $javascript .= "function populateSuites()\n";
    $javascript .= "{\n";
    $javascript .= "var currSuite;\n";
    $javascript .= "var currDirectory;\n";
    $javascript .= "var currTestDirs;\n";
    $javascript .= "var currTests;\n";

    $html .= "<h3>Test Suites:</h3>\n";
    $html .= "<center>\n";
    $html .= "<input type='button' value='Select All' " .
      "onclick='selectAll();'> \n";
    $html .= "<input type='button' value='Select None' " .
      "onclick='selectNone();'> \n";

    # suite menu
    $html .= "<table border='1' summary='suite menu'>\n";
    foreach $suite (@suite_list) {
	local @readme_text = ("No description available.");
	if (open (README, $suite_path . $suite . "/README")) {
	    @readme_text = <README>;
	    close (README);
	}
	$html .= "<tr>\n";
	$html .= "<td>\n";
	$html .= "<a href='\#SUITE_$suite'>$suite</a>\n";
	$html .= "</td>\n";
	$html .= "<td>@readme_text</td>\n";
	$html .= "<td>\n";
	$html .= "<input type='button' value='Select All' " .
	  "onclick='selectAll(\"$suite\");'> \n";
	$html .= "<input type='button' value='Select None' " .
	  "onclick='selectNone(\"$suite\");'>\n";
	$html .= "</td>\n";
	$html .= "<td><input readonly name='SUMMARY_$suite'></td>";
	$html .= "</tr>";
    }
    $html .= "</table>\n";
    $html .= "<div><input readonly name='TOTAL'></div>\n";
    $html .= "</center>\n";

    $html .= "<dl>\n";
    foreach $i (0 .. $#suite_list) {
	local $prev_href = ($i > 0) ? "\#SUITE_" . $suite_list[$i - 1] : "";
	local $next_href = ($i < $#suite_list) ? "\#SUITE_" .
	    $suite_list[$i + 1] : "";
	&process_suite ($suite_path, $suite_list[$i], $prev_href, $next_href);
    }
    $html .= "</dl>\n";

    $javascript .= "}\n";
    $javascript .= "populateSuites();\n";
}

#
# Append detail from a 'suite' directory (eg: ecma, ecma_2, js1_1, etc.), calling
# process_test_dir for subordinate categories.
#
sub process_suite {
    local ($suite_path, $suite, $prev_href, $next_href) = @_;
    local $i, @test_dir_list;   
    local $suite_count = 0;

    # suite js object
    $javascript .= "currSuite = suites[\"$suite\"] = " .
	"{testDirs:{}, count:0, selected:0};\n";
    $javascript .= "currTestDirs = currSuite.testDirs;\n";

    @test_dir_list = sort(&get_subdirs ($test_home . $suite));

    # suite header

    $html .= "<dt>\n";
    $html .= "<a name='SUITE_$suite'></a>$suite " .
      "(" . ($#test_dir_list + 1) . " Sub-Categories)\n";
    $html .= "<input type='button' value='Select All' " .
	"onclick='selectAll(\"$suite\");'>\n";
    $html .= "<input type='button' value='Select None' " .
	"onclick='selectNone(\"$suite\");'> \n";
    $html .= "[ ";
    $html .= "<a href='\#top_of_page'>Top of page</a> \n";
    if ($prev_href) {
	$html .= " | ";
        $html .= "<a href='$prev_href'>Previous Suite</a> \n";
    }
    if ($next_href) {
	$html .= " | ";
        $html .= "<a href='$next_href'>Next Suite</a> \n";
    }
    $html .= "]\n";
    $html .= "</dt>\n";
    $html .= "<dd>\n";

    foreach $i (0 .. $#test_dir_list) {
	local $prev_href = ($i > 0) ? "\#TESTDIR_" . $suite .
	    $test_dir_list[$i - 1] :
	    "";
	local $next_href = ($i < $#test_dir_list) ?
	  "\#TESTDIR_" . $suite . $test_dir_list[$i + 1] : "";
	&process_test_dir ($suite_path . $suite . "/", $test_dir_list[$i],
			   $suite,
			   $prev_href, $next_href);
    }
    $javascript .= "currSuite.count = $suite_count;\n";

    $html .= "</dd>\n";
}

#
# Append detail from a test directory,
# calling process_test for subordinate js files
#
sub process_test_dir {
    local ($test_dir_path, $test_dir, $suite, $prev_href, $next_href) = @_;

    @test_list = sort(&get_js_files ($test_dir_path . $test_dir));

    if ($#test_list >= 0)
    {
	$suite_count += @test_list;

	$javascript .= "currDirectory = currTestDirs[\"$test_dir\"] = " .
	    "{tests:{}};\n";
	$javascript .= "currTests = currDirectory.tests;\n";

	$html .= "<dl>\n";
	$html .= "<dt>\n";
	$html .= "<a name='TESTDIR_$suite$test_dir'></a>\n";
	$html .= "$test_dir (" . ($#test_list + 1) . " tests)\n";
	$html .= "<input type='button' value='Select All' " .
	    "onclick='selectAll(\"$suite\", \"$test_dir\");'>\n";
	$html .= "<input type='button' value='Select None' " .
	    "onclick='selectNone(\"$suite\", \"$test_dir\");'> ";
	$html .= "[ <a href='\#SUITE_$suite'>Top of $suite Suite</a> ";
	if ($prev_href) {
	    $html .= "| <a href='$prev_href'>Previous Category</a> ";
	}
	if ($next_href) {
	    $html .= " | <a href='$next_href'>Next Category</a> ";
	}
	$html .= "]\n";
	$html .= "</dt>\n";

	$html .= "<dd>\n";

	foreach $test (@test_list) {
	    &process_test ($test_dir_path . $test_dir, $test);
	}

	$html .= "</dl>\n";
    }
}


#
# Append detail from a single JavaScript file.
#
sub process_test {
    local ($test_dir_path, $test) = @_;
    local $title = "";

    # ignore excluded tests
    if ($excludedhash{"$test_dir_path/$test"})
    {
	--$suite_count;
	return;
    }

    $uid++;

    open (TESTCASE, $test_dir_path . "/" . $test) ||
      die ("Error opening " . $test_dir_path . "/" . $test);

    while (<TESTCASE>) {
	if (/.*(TITLE|summary)\s+\=\s+[\"\'](.*)[\"\']/i) {
	    $title = $2;
	    break;
	}
	if (/.*START\([\"\'](.*)[\"\']\);/)
        {
	    $title = $1;
	    break;
	}
    }
    close (TESTCASE);

    $javascript .= "currTests[\"$test\"] = {id:\"t$uid\"}\n";
    $html .= "<dd>\n";
    $html .= " <input type='checkbox' value='$test' name='t$uid' " .
        "id='$suite:$test_dir:$test' ".
	"onclick='return onRadioClick(this);'>\n";
    $html .= "<a href='$lxr_url$suite/$test_dir/$test' target='other_window'>" .
	"$test</a> $title\n";
    $html .= "</dd>\n";

}

sub scriptTag {

    return ("<script type='text/javascript' language='JavaScript'>@_</script>");

}

#
# given a directory, return an array of all subdirectories
#
sub get_subdirs {
    local ($dir)  = @_;
    local @subdirs;

    if (!($dir =~ /\/$/)) {
	$dir = $dir . "/";
    }

    opendir (DIR, $dir) || die ("couldn't open directory $dir: $!");
    local @testdir_contents = readdir(DIR);
    closedir(DIR);

    foreach (@testdir_contents) {
        if ((-d ($dir . $_)) && ($_ ne 'CVS') && ($_ ne '.') && ($_ ne '..')) {
            @subdirs[$#subdirs + 1] = $_;
        }
    }

    return @subdirs;
}

#
# given a directory, return an array of all the js files that are in it.
#
sub get_js_files {
    local ($test_subdir) = @_;
    local @js_file_array;

    opendir ( TEST_SUBDIR, $test_subdir) || die ("couldn't open directory " .
						 "$test_subdir: $!");
    @subdir_files = readdir( TEST_SUBDIR );
    closedir( TEST_SUBDIR );

    foreach ( @subdir_files ) {
#	print "excluded $test_subdir/$_\n" if $excludedhash{"$test_subdir/$_"};
        if ( ($_ =~ /\.js$/) && ($_ ne 'shell.js') && ($_ ne 'browser.js') &&
	     (!$excludedhash{"$test_subdir/$_"}) ) {
            $js_file_array[$#js_file_array+1] = $_;
        }
    }

    return @js_file_array;
}


# copied from jsDriver.pl

#
# reads $list_file, storing non-comment lines into an array.
# lines in the form suite_dir/[*] or suite_dir/test_dir/[*] are expanded
# to include all test files under the specified directory
#
sub expand_user_test_list {
    my ($list_file) = @_;
    my @retval = ();

    #
    # Trim off the leading path separator that begins relative paths on the Mac.
    # Each path will get concatenated with $opt_suite_path, which ends in one.
    #
    # Also note:
    #
    # We will call expand_test_list_entry(), which does pattern-matching on $list_file.
    # This will make the pattern-matching the same as it would be on Linux/Windows -
    #
    if ($os_type eq "MAC") {
        $list_file =~ s/^$path_sep//;
    }

    if ($list_file =~ /\.js$/ || -d $opt_suite_path . $list_file) {

        push (@retval, &expand_test_list_entry($list_file));

    } else {

        open (TESTLIST, $list_file) ||
          die("Error opening test list file '$list_file': $!\n");

        while (<TESTLIST>) {
            s/\r*\n*$//;
            if (!(/\s*\#/)) {
                # It's not a comment, so process it
                push (@retval, &expand_test_list_entry($_));
            }
        }

        close (TESTLIST);

    }

    return @retval;

}


#
# Currently expect all paths to be RELATIVE to the top-level tests directory.
# One day, this should be improved to allow absolute paths as well -
#
sub expand_test_list_entry {
    my ($entry) = @_;
    my @retval;

    if ($entry =~ /\.js$/) {
        # it's a regular entry, add it to the list
        if (-f $opt_suite_path . $entry) {
            push (@retval, $entry);
        } else {
            status ("testcase '$entry' not found.");
        }
    } elsif ($entry =~ /(.*$path_sep[^\*][^$path_sep]*)$path_sep?\*?$/) {
        # Entry is in the form suite_dir/test_dir[/*]
        # so iterate all tests under it
        my $suite_and_test_dir = $1;
        my @test_files = &get_js_files ($opt_suite_path .
                                        $suite_and_test_dir);
        my $i;

        foreach $i (0 .. $#test_files) {
            $test_files[$i] = $suite_and_test_dir . $path_sep .
              $test_files[$i];
        }

        splice (@retval, $#retval + 1, 0, @test_files);

    } elsif ($entry =~ /([^\*][^$path_sep]*)$path_sep?\*?$/) {
        # Entry is in the form suite_dir[/*]
        # so iterate all test dirs and tests under it
        my $suite = $1;
        my @test_dirs = &get_subdirs ($opt_suite_path . $suite);
        my $test_dir;

        foreach $test_dir (@test_dirs) {
            my @test_files = &get_js_files ($opt_suite_path . $suite .
                                            $path_sep . $test_dir);
            my $i;

            foreach $i (0 .. $#test_files) {
                $test_files[$i] = $suite . $path_sep . $test_dir . $path_sep .
                  $test_files[$i];
            }

            splice (@retval, $#retval + 1, 0, @test_files);
        }

    } else {
        die ("Dont know what to do with list entry '$entry'.\n");
    }

    return @retval;

}

sub status {

    print STDERR ("-#- ", @_ , "\n");

}