mail/locales/en-US/chrome/messenger/messenger.properties
author Austin King <ozten.bugs@gmail.com>
Mon, 22 Nov 2010 11:38:00 -0500
changeset 6745 f76f5e2d8f26fd7234b7608a3ac2d6a04b15c409
parent 6727 667919b9f8a3ea087ce067d71d185f8032461a32
child 6859 9704a3548bdb2e02260f7b03cc4d380cd6e2a63b
permissions -rw-r--r--
Bug 613224 - Bad link for atlbase.h. r=Callek

# ***** BEGIN LICENSE BLOCK *****
# Version: MPL 1.1/GPL 2.0/LGPL 2.1
#
# The contents of this file are subject to the Mozilla Public License Version
# 1.1 (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
# http://www.mozilla.org/MPL/
#
# Software distributed under the License is distributed on an "AS IS" basis,
# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
# for the specific language governing rights and limitations under the
# License.
#
# The Original Code is mozilla.org code.
#
# The Initial Developer of the Original Code is
# Netscape Communications Corporation.
# Portions created by the Initial Developer are Copyright (C) 1998
# the Initial Developer. All Rights Reserved.
#
# Contributor(s):
#   Seth Spitzer <sspitzer@netscape.com>
#   Lorenzo Colitti <lorenzo@colitti.com>
#
# Alternatively, the contents of this file may be used under the terms of
# either of the GNU General Public License Version 2 or later (the "GPL"),
# or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
# in which case the provisions of the GPL or the LGPL are applicable instead
# of those above. If you wish to allow use of your version of this file only
# under the terms of either the GPL or the LGPL, and not to allow others to
# use your version of this file under the terms of the MPL, indicate your
# decision by deleting the provisions above and replace them with the notice
# and other provisions required by the GPL or the LGPL. If you do not delete
# the provisions above, a recipient may use your version of this file under
# the terms of any one of the MPL, the GPL or the LGPL.
#
# ***** END LICENSE BLOCK *****

# The following are used by the messenger application
#
removeAccount=Delete Account…
newFolderMenuItem=Folder…
newSubfolderMenuItem=Subfolder…
newFolder=New Folder…
newSubfolder=New Subfolder…
markFolderRead=Mark Folder Read;Mark Folders Read
markNewsgroupRead=Mark Newsgroup Read;Mark Newsgroups Read
folderProperties=Folder Properties
newTag=New Tag…
getNextNMessages=Get Next %S News Messages
advanceNextPrompt=Advance to next unread message in %S?
titleNewsPreHost=on
replyToSender=Reply to Sender
reply=Reply
EMLFiles=Mail Files
OpenEMLFiles=Open Message
# LOCALIZATION NOTE(defaultSaveMessageAsFileName): Do not translate ".eml"
# in the line below. Also, the complete file name should be 8.3.
defaultSaveMessageAsFileName=message.eml
SaveMailAs=Save Message As
SaveAttachment=Save Attachment
SaveAllAttachments=Save All Attachments
ChooseFolder=Choose Folder
LoadingMessageToPrint=Loading message to print…
MessageLoaded=Message loaded…
PrintingMessage=Printing message…
PrintPreviewMessage=Print Previewing message…
PrintingContact=Printing contact…
PrintPreviewContact=Print Previewing contact…
PrintingAddrBook=Printing AddressBook…
PrintPreviewAddrBook=Print Previewing AddressBook…
PrintingComplete=Done.
PreviewTitle=%S - %S
LoadingMailMsgForPrint=(Loading content for Printing)
LoadingMailMsgForPrintPreview=(Loading content for Print Preview)
saveAttachmentFailed=Unable to save the attachment. Please check your file name and try again later.
saveMessageFailed=Unable to save the message. Please check your file name and try again later.
fileExists=%S already exists. Do you want to replace it?

downloadingNewsgroups=Downloading Newsgroups for Offline Use
downloadingMail=Downloading Mail for Offline Use
sendingUnsent=Sending Unsent Messages

folderExists=A folder with that name already exists. Please enter a different name.
folderCreationFailed=The folder could not be created because the folder name you specified contains an unrecognized character. Please enter a different name and try again.

compactingFolder=Compacting folder %S…
doneCompacting=Done compacting
autoCompactAllFoldersTitle=Compact Folders
autoCompactAllFolders=Do you wish to compact all local and offline folders to save disk space?
autoCompactAlwaysAskCheckbox=Always ask me before compacting folders automatically
compactNowButton=Compact &Now

confirmFolderDeletionForFilter=Deleting the folder '%S' will disable its associated filter(s). Are you sure you want to delete the folder?
alertFilterChanged=Filters associated with this folder will be updated.
filterDisabled=The folder '%S' could not be found, so filter(s) associated with this folder will be disabled. Verify that the folder exists, and that filters point to a valid destination folder.
filterFolderDeniedLocked=The messages could not be filtered to folder '%S' because another operation is in progress.
parsingFolderFailed=Unable to open the folder %S because it is in use by some other operation. Please wait for that operation to finish and then select the folder again. 
deletingMsgsFailed=Unable to delete messages in folder %S because it is in use by some other operation. Please wait for that operation to finish and then try again.
alertFilterCheckbox=Do not warn me again.
compactFolderDeniedLock=The folder '%S' cannot be compacted because another operation is in progress. Please try again later.
compactFolderWriteFailed=The folder '%S' could not be compacted because writing to folder failed. Verify that you have enough disk space, and that you have write privileges to the file system, then try again.
filterFolderWriteFailed=The messages could not be filtered to folder '%S' because writing to folder failed. Verify that you have enough disk space, and that you have write privileges to the file system, then try again.
copyMsgWriteFailed=The messages could not be moved or copied to folder '%S' because writing to folder failed. To gain disk space, from the File menu, first choose Empty Trash, and then choose Compact Folders, and then try again.
cantMoveMsgWOBodyOffline=While working offline, you cannot move or copy messages that were not downloaded for offline use. From the Mail window, open the File menu, choose Offline, then uncheck Work Offline, and then try again.
operationFailedFolderBusy=The operation failed because an other operation is using the folder. Please wait for that operation to finish and then try again.
folderRenameFailed=The folder could not be renamed. Perhaps the folder is being reparsed, or the new name is not a valid folder name.
# LOCALIZATION NOTE(verboseFolderFormat): %1$S is folder name, %2$S is server name
verboseFolderFormat=%1$S on %2$S
# LOCALIZATION NOTE(filterFolderTruncateFailed): %1$S is replaced by the folder name, %2$S is replaced by the brandShortName
filterFolderTruncateFailed=There was an error truncating the Inbox after filtering a message to folder '%1$S'. You may need to shutdown %2$S and delete INBOX.msf.

mailboxTooLarge=The folder %S is full, and can't hold any more messages. To make room for more messages, delete any old or unwanted mail and compact the folder.
errorGettingDB=Unable to open the summary file for %S. Perhaps there was an error on disk, or the full path is too long.
defaultServerTag=(Default)

# Used in message database list view to provide a text value for graphic based cells.
messageUnread=Unread
messageHasFlag=Starred
messageHasAttachment=Has Attachment
messageJunk=Junk
messageExpanded=Expanded
messageCollapsed=Collapsed

# Used in the SMTP Account Settings panel when a server value has no properties
smtpServerList-NotSpecified=<not specified>
smtpServer-ConnectionSecurityType-0=None
smtpServer-ConnectionSecurityType-1=STARTTLS, if available
smtpServer-ConnectionSecurityType-2=STARTTLS
smtpServer-ConnectionSecurityType-3=SSL/TLS
smtpServer-SecureAuthentication-Type-false=No
smtpServer-SecureAuthentication-Type-true=Yes
smtpServers-confirmServerDeletionTitle=Delete Server
smtpServers-confirmServerDeletion=Are you sure you want to delete the server: \n %S?

# Account Settings - Both Incoming and SMTP server
authNo=No authentication
authOld=Password, original method (insecure)
authPasswordCleartextInsecurely=Password, transmitted insecurely
authPasswordCleartextViaSSL=Normal password
authPasswordEncrypted=Encrypted password
authKerberos=Kerberos / GSSAPI
authExternal=TLS Certificate
authNTLM=NTLM
authAnySecure=Any secure method (deprecated)
authAny=Any method (insecure)

# LOCALIZATION NOTE(serverType-nntp): Do not translate "NNTP" in the line below
serverType-nntp=News Server (NNTP)
# LOCALIZATION NOTE(serverType-pop3): Do not translate "POP" in the line below
serverType-pop3=POP Mail Server
# LOCALIZATION NOTE(serverType-imap): Do not translate "IMAP" in the line below
serverType-imap=IMAP Mail Server
serverType-none=Local Mail Store
# LOCALIZATION NOTE(serverType-movemail): DONT_TRANSLATE
serverType-movemail=Unix Movemail

sizeColumnTooltip=Click to sort by size
sizeColumnHeader=Size
linesColumnTooltip=Click to sort by lines
linesColumnHeader=Lines

# status feedback stuff
documentDone=
documentLoading=Loading Message…

# LOCALIZATION NOTE (autosyncProgress): Do not translate the word "%1$S" or "%2$S" below.
# Place the word %1$S in your translation where the name of the comma separated folders should appear.
# Place the word %2$S in your translation where the name of the comma separated accounts should appear.
autosyncProgress=Synchronizing messages in %1$S from %2$S…

unreadMsgStatus=Unread: %S
selectedMsgStatus=Selected: %S
totalMsgStatus=Total: %S

# localized folder names

localFolders=Local Folders

# LOCALIZATION NOTE (inboxFolderName): OK to translate all foldernames, bugzilla #57440 & bugzilla #23625 fixed
inboxFolderName=Inbox
trashFolderName=Trash
sentFolderName=Sent
draftsFolderName=Drafts
templatesFolderName=Templates
outboxFolderName=Outbox
junkFolderName=Junk
archivesFolderName=Archives

# Error message for special folder deletion on imap accounts
# LOCALIZATION NOTE (specialFolderDeletionErr): Do not translate "IMAP" in the line below
specialFolderDeletionErr=Deletion of special folder %S is not allowed for IMAP accounts.
specialFolderDeletionErrTitle=Special Folder Deletion

# "Normal" priority is often blank,
# depending on the consumers of these strings
priorityLowest=Lowest
priorityLow=Low
priorityNormal=Normal
priorityHigh=High
priorityHighest=Highest

#Group by date thread pane titles
today=Today
yesterday=Yesterday
lastWeek=Last Week
twoWeeksAgo=Two Weeks Ago
older=Old Mail

#Grouped By Tags
untaggedMessages=Untagged Messages

# Grouped by status
messagesWithNoStatus=No Status

#Grouped by priority
noPriority=No Priority

#Grouped by has attachments
noAttachments=No Attachments
attachments=Attachments

#Grouped by starred
notFlagged=Not Starred
groupFlagged=Starred

# defaults descriptions for tag prefs listed in mailnews.js
# (we keep the .labels. names for backwards compatibility)
mailnews.tags.remove=Remove All Tags
mailnews.labels.description.1=Important
mailnews.labels.description.2=Work
mailnews.labels.description.3=Personal
mailnews.labels.description.4=To Do
mailnews.labels.description.5=Later

# Format definition tag menu texts.
# This is necessary in order to get the accesskeys to be the on the first
# character of the menu text instead of after the menu text.
# If a key definition exists for the tag at index n, that key's key will be
# taken as the accesskey, eg.
#   <key id="key_tag3" key="&tagCmd3.key;" oncommand="ToggleMessageTagKey(3);"/>
# makes the third tag have the accesskey &tagCmd3.key;.
# In the menuitem's label, this accesskey appears at %1$S below; %2$S will be
# replaced by the tag label.
mailnews.tags.format=%1$S %2$S

replied=Replied
forwarded=Forwarded
new=New
read=Read
flagged=Starred

# for junk status picker in search and mail views
junk=Junk

# for junk score origin picker in search and mail views
junkScoreOriginPlugin=Plugin
junkScoreOriginFilter=Filter
junkScoreOriginWhitelist=Whitelist
junkScoreOriginUser=User
junkScoreOriginImapFlag=IMAP Flag

# for the has attachment picker in search and mail views
hasAttachments=Has Attachments

# for the Tag picker in search and mail views.
tag=Tags

# mailnews.js
mailnews.send_default_charset=ISO-8859-1
mailnews.view_default_charset=ISO-8859-1

# generate display names in last first order
# valid mail.addr_book.displayName.lastnamefirst are: true or false
mail.addr_book.displayName.lastnamefirst=false

# the format for "mail.addr_book.quicksearchquery.format" is:
# @V == the escaped value typed in the quick search bar in the addressbook
#
# note, changing this might require a change to SearchNameOrEmail.label
# in messenger.dtd
#
# LOCALIZATION NOTE - please add phonetic names as below when "mail.addr_book.show_phonetic_fields" is true
# "?(or(PrimaryEmail,c,@V)(DisplayName,c,@V)(FirstName,c,@V)(LastName,c,@V)(PhoneticFirstName,c,@V)(PhoneticLastName,c,@V))"
#
mail.addr_book.quicksearchquery.format=?(or(PrimaryEmail,c,@V)(DisplayName,c,@V)(FirstName,c,@V)(LastName,c,@V))

# valid mail.addr_book.show_phonetic_fields are: true or false
mail.addr_book.show_phonetic_fields=false

# valid format options are:
# 1: yyyy/mm/dd
# 2: yyyy/dd/mm
# 3: mm/dd/yyyy
# 4: mm/yyyy/dd
# 5: dd/mm/yyyy
# 6: dd/yyyy/mm
#
# 0: auto-detect the current locale format
#    a separator has to be either '/', '-', '.' and the year in Chistian year
#    otherwise mm/dd/yyyy (option 3) is used
#
mailnews.search_date_format=0
# separator for search date (e.g. "/", "-"), or empty when search_date_format is zero
mailnews.search_date_separator=
# leading zeros for day and month values, not used if mailnews.search_date_format is not zero
mailnews.search_date_leading_zeros=true

# offline msg 
nocachedbodybody=The body of this message has not been downloaded from \
the server for reading offline. To read this message, \
you must reconnect to the network, choose Offline from \
the File menu and then uncheck Work Offline. \
In the future, you can select which messages or folders to read offline. To do \
this, choose Offline from the file menu and then select Synchronize. You can \
adjust the Disk Space preference to prevent the downloading of large messages.

# accountCentral
mailnews.account_central_page.url=chrome://messenger/content/msgAccountCentral.xul
# LOCALIZATION NOTE(acctCentralTitleFormat): %1$S is brand, %2$S is account type, %3$S is account name
acctCentralTitleFormat=%1$S %2$S - %3$S
mailAcctType=Mail
newsAcctType=News

# LOCALIZATION NOTE(nocachedbodytitle): Do not translate "<TITLE>" or "</TITLE>" in the line below
nocachedbodytitle=<TITLE>Go Online to View This Message</TITLE>\n

# mailWindowOverlay.js
confirmUnsubscribeTitle=Confirm Unsubscribe
confirmUnsubscribeText=Are you sure you want to unsubscribe from %S?
confirmUnsubscribeManyText=Are you sure you want to unsubscribe from these newsgroups?

# msgHdrViewOverlay.js
openLabel=Open
openLabelAccesskey=O
saveLabel=Save As…
saveLabelAccesskey=A
detachLabel=Detach…
detachLabelAccesskey=D
deleteLabel=Delete
deleteLabelAccesskey=E
deleteAttachments=The following attachments will be permanently deleted from this message:\n%S\nThis action cannot be undone. Do you wish to continue?
detachAttachments=The following attachments have been successfully saved and will now be permanently deleted from this message:\n%S\nThis action cannot be undone. Do you wish to continue?
deleteAttachmentFailure=Failed to delete the selected attachments.
emptyAttachment=This attachment appears to be empty.\nPlease check with the person who sent this.\nOften company firewalls or antivirus programs will destroy attachments.

# This is the format for prepending accesskeys to the
# each of the attachments in the file|attachments menu:
#   ie: 1 file.txt
#       2 another file.txt
attachmentDisplayNameFormat=%S %S

# Connection Error Messages
101=Unknown Error 
102=Failed to connect to server %S.
103=Could not connect to server %S; the connection was refused.
104=Connection to server %S timed out.

recipientSearchCriteria=Subject or Recipient contains:
fromSearchCriteria=Subject or From contains:

# LOCALIZATION NOTE(biffNotification): %1$S is the number of new messages  
biffNotification_message=has %1$S new message
biffNotification_messages=has %1$S new messages

# LOCALIZATION NOTE(biffNotification): %1$S is the name of the account %2$S is the number of new messages  
newBiffNotification_message=%1$S has %2$S new message
newBiffNotification_messages=%1$S has %2$S new messages

# LOCALIZATION NOTE(macBiffNotification is Mac only):
#  %1$S is the number of new messages
#  %2$S is a list of names and/or email addresses separated by biffNotification_separator
#  %3$S is the number of new messages not displayed in the biff alert
macBiffNotification_message=%1$S new message from %2$S.
macBiffNotification_messages=%1$S new messages from %2$S.
macBiffNotification_messages_extra=%1$S new messages from %2$S and %3$S more.
# Used to separate names/email addresses in a list.  Note the trailing space ', '
macBiffNotification_separator=,\u0020

# For the Quota tab in the mail folder properties dialog
quotaUsedFree=%S of %S KB used
quotaPercentUsed=%S%% full
# for quota in main window (commandglue.js)
percent=%S%%
quotaTooltip=IMAP quota: %S KB used of %S KB total. Click for details.

# for message views
confirmViewDeleteTitle=Confirm
confirmViewDeleteMessage=Are you sure you want to delete this view?

# for virtual folders
confirmSavedSearchTitle=Confirm Delete
confirmSavedSearchDeleteMessage=Are you sure you want to delete this saved search?

## @name ENTER_PASSWORD_PROMPT
## @loc None
# LOCALIZATION NOTE (passwordPrompt): Do not translate the word %S below.
# Place the word "%S" in your translation where the email address
# or the username should appear
passwordPrompt=Enter your password for %1$S on %2$S:

## @name ENTER_PASSWORD_PROMPT_TITLE
## @loc None
passwordTitle=Mail Server Password Required

# for checking if the user really wants to open lots of messages
openWindowWarningTitle=Confirm
openWindowWarningText=Opening %S messages may be slow.  Continue?

# for warning the user that a tag they're trying to create already exists
tagExists=A tag with that name already exists.

# title of the edit tag dialog
editTagTitle=Edit Tag

# for the virtual folder list dialog title
# %S is the name of the saved search folder
editVirtualFolderPropertiesTitle=Edit Saved Search Properties for %S

#alert to inform the user to choose one or more folders to search for a saved search folder
alertNoSearchFoldersSelected=You must choose at least one folder to search for the saved search folder.

# These are displayed in the message and folder pane windows
# LOCALIZATION NOTE %.*f is the abbreviated size in the appropriate units
byteAbbreviation2=%.*f bytes
kiloByteAbbreviation2=%.*f KB
megaByteAbbreviation2=%.*f MB
gigaByteAbbreviation2=%.*f GB

# Error message if message for a message id wasn't found
errorOpenMessageForMessageIdTitle=Error opening message-id
errorOpenMessageForMessageIdMessage=Message for message-id %S not found

# Warnings to alert users about phishing urls
confirmPhishingTitle=Email Scam Alert
#LOCALIZATION NOTE %1$S is the brand name, %2$S is the host name of the url being visited
confirmPhishingUrl=%1$S thinks this message is a scam. The links in the message may be trying to impersonate web pages you want to visit. Are you sure you want to visit %2$S?

# Check for Updates
# LOCALIZATION NOTE (updatesItem_*): these are alternative labels for Check for Update item in Help menu.
# Which one is used depends on Update process state.
updatesItem_default=Check for Updates…
updatesItem_defaultFallback=Check for Updates…
updatesItem_default.accesskey=C
updatesItem_downloading=Downloading %S…
updatesItem_downloadingFallback=Downloading Update…
updatesItem_downloading.accesskey=D
updatesItem_resume=Resume Downloading %S…
updatesItem_resumeFallback=Resume Downloading Update…
updatesItem_resume.accesskey=D
updatesItem_pending=Apply Downloaded Update Now…
updatesItem_pendingFallback=Apply Downloaded Update Now…
updatesItem_pending.accesskey=D

# Folder Pane Header Title Strings
folderPaneModeHeader_all=All Folders
folderPaneModeHeader_unread=Unread Folders
folderPaneModeHeader_favorite=Favorite Folders
folderPaneModeHeader_recent=Recent Folders
folderPaneModeHeader_smart=Unified Folders
unifiedAccountName=Unified Folders

# Copy / Move to Folder Again
#LOCALIZATION NOTE %1$S is the name of the folder we will move to. moveToFolderAgainAccessKey
# should have the same value as copyToFolderAgainAccessKey as they are the same menu item in the UI
# moveToFolderAgainAccessKey should also be a letter that occurs before %1$S
moveToFolderAgain=Move to "%1$S" Again
moveToFolderAgainAccessKey=t
#LOCALIZATION NOTE %1$S is the name of the folder we will copy to
# copyToFolderAgainAccessKey
# should have the same value as moveToFolderAgainAccessKey as they are the same menu item in the UI
# copyToFolderAgainAccessKey should also be a letter that occurs before %1$S
copyToFolderAgain=Copy to "%1$S" Again
copyToFolderAgainAccessKey=t

#LOCALIZATION NOTE %1$S is the e-mail address of the person we will allow remote content for
alwaysLoadRemoteContentForSender2= Always load remote content from %1$S 

# Strings for growl notifications on Mac OS X
growlNotification=New Mail

# mailCommands.js
emptyJunkTitle=Confirm
emptyJunkMessage=Are you sure you want to permanently delete all messages and subfolders in the Junk folder?
emptyJunkDontAsk=Don't ask me again.
emptyTrashTitle=Confirm
emptyTrashMessage=Are you sure you want to permanently delete all messages and subfolders in the Trash folder?
emptyTrashDontAsk=Don't ask me again.

# junkCommands.js
junkAnalysisPercentComplete=Junk analysis %S complete
processingJunkMessages=Processing Junk Messages

# Messenger bootstrapping messages
fileNotFoundTitle = File Not Found
#LOCALIZATION NOTE(fileNotFoundMsg): %S is the filename
fileNotFoundMsg = The file %S does not exist.

fileEmptyTitle = File Empty
#LOCALIZATION NOTE(fileEmptyMsg): %S is the filename
fileEmptyMsg = The file %S is empty.

# LOCALIZATION NOTE (headerMoreAddrs): semicolon separated list of plural
# forms of the word "more" as used after the number of addresses
# currently hidden while displaying a header such as "to", "cc", or "bcc"
# in the message header box.  English has two identical forms here, so it will
# construct strings that look like (for example) "1 more" or "20 more".
# <http://developer.mozilla.org/en/Localization_and_Plurals> has details
# on this mechanism.
headerMoreAddrs=#1 more;#1 more

# LOCALIZATION NOTE (headertoFieldYou): second person prepositional object
# pronoun used in the "to" header of the message header pane.  This is also
# used for the fallback case if a header-specific localization is not
# available.
headertoFieldYou=You

# LOCALIZATION NOTE (headerfromFieldYou): second person prepositional object
# pronoun used in the "from" header of the message header pane.
headerfromFieldYou=You

# LOCALIZATION NOTE (headerreply-toFieldYou): second person prepositional
# object pronoun used in the "reply-to" header of the message header pane.
headerreply-toFieldYou=You

# LOCALIZATION NOTE (headerccFieldYou): second person prepositional object
# pronoun used in the "cc" header of the message header pane.
headerccFieldYou=You

# LOCALIZATION NOTE (headerbccFieldYou): second person prepositional object
# pronoun used in the "bcc" header of the message header pane.
headerbccFieldYou=You

# Shown when content tabs are being loaded.
loadingTab=Loading…

# LOCALIZATION NOTE (xpinstallPromptWarning):
# %1$S is replaced by brandShortName, %2$S is replaced by the host name of the
# site.
xpinstallPromptWarning=%1$S prevented the site (%2$S) from asking you to install software on your computer.
xpinstallPromptAllowButton=Allow
# LOCALIZATION NOTE (xpinstallPromptAllowButton.accesskey):
# Accessibility Note:
# Be sure you do not choose an accesskey that is used elsewhere in the active
# context (e.g. main menu bar, submenu of the warning popup button).
# See http://www.mozilla.org/access/keyboard/accesskey for details
xpinstallPromptAllowButton.accesskey=A

xpinstallDisabledMessageLocked=Software installation has been disabled by your system administrator.
xpinstallDisabledMessage=Software installation is currently disabled. Click Enable and try again.
xpinstallDisabledButton=Enable
xpinstallDisabledButton.accesskey=n

applyToCollapsedMsgsTitle=Confirm Delete of Messages in Collapsed Thread(s)
applyToCollapsedMsgs=Warning - this will delete messages in collapsed thread(s)
applyToCollapsedAlwaysAskCheckbox=Always ask me before deleting messages in collapsed threads
applyNowButton=Apply

mailServerLoginFailedTitle=Login Failed
# LOCALIZATION NOTE (mailServerLoginFailedTitle): Insert "%S" in your
# translation where you wish to display the hostname of the server to which
# login failed.
mailServerLoginFailed=Login to server %S failed.
mailServerLoginFailedRetryButton=&Retry
mailServerLoginFailedEnterNewPasswordButton=&Enter New Password

extensions.{972ce4c6-7e08-4474-a285-3208198ce6fd}.name=Default
extensions.{972ce4c6-7e08-4474-a285-3208198ce6fd}.description=The default theme.

# LOCALIZATION NOTE (threadPane.columnPicker.confirmFolder.noChildren.title):
# When the user selects a folder to apply the currently displayed columns to
# via the "columnPicker.applyToFolder.label" menu option, this is the title of
# the confirmation dialog used to verify they selected the correct folder.  This
# is the case in which we apply the columns only to the folder and not to any of
# its children.
threadPane.columnPicker.confirmFolder.noChildren.title=Apply Changes?
# LOCALIZATION NOTE (threadPane.columnPicker.confirmFolder.noChildren.message):
# When the user selects a folder to apply the currently displayed columns to
# via the "columnPicker.applyToFolder.label" menu option, this is the text of
# the confirmation dialog used to verify they selected the correct folder.  The
# string '%S' is replaced with the name of the folder the user selected in
# order to help them confirm they picked what they thought they picked.  This
# is the case in which we apply the columns only to the folder and not to any of
# its children.
threadPane.columnPicker.confirmFolder.noChildren.message=Apply the current folder's columns to %S?

# LOCALIZATION NOTE (threadPane.columnPicker.confirmFolder.withChildren.title):
# When the user selects a folder to apply the currently displayed columns to via
# the "columnPicker.applyToFolderAndChildren.label" menu option, this is the
# title of the confirmation dialog used to verify they selected the correct
# folder.  This is the case in which we apply the columns to the folder and all
# of its children.
threadPane.columnPicker.confirmFolder.withChildren.title=Apply Changes?
# LOCALIZATION NOTE (threadPane.columnPicker.confirmFolder.withChildren.message):
# When the user selects a folder to apply the currently displayed columns to via
# the "columnPicker.applyToFolderAndChildren.label" menu option, this is the
# text of the confirmation dialog used to verify they selected the correct
# folder.  The string '%S' is replaced with the name of the folder the user
# selected in order to help them confirm they picked what they thought they
# picked.  This is the case in which we apply the columns to the folder and all
# of its children.
threadPane.columnPicker.confirmFolder.withChildren.message=Apply the current folder's columns to %S and its children?

# LOCALIZATION NOTE (lwthemeInstallRequest.message): %S will be replaced with
# the host name of the site.
lwthemeInstallRequest.message=This site (%S) attempted to install a theme.
lwthemeInstallRequest.allowButton=Allow
lwthemeInstallRequest.allowButton.accesskey=a

lwthemePostInstallNotification.message=A new theme has been installed.
lwthemePostInstallNotification.undoButton=Undo
lwthemePostInstallNotification.undoButton.accesskey=U
lwthemePostInstallNotification.manageButton=Manage Themes…
lwthemePostInstallNotification.manageButton.accesskey=M