mailnews/base/public/nsIMsgIdentity.idl
author Richard Marti <richard.marti@gmail.com>
Fri, 16 Sep 2011 23:02:07 +0200
changeset 9187 8809beb3c8dd3c2f55acdc16f40248f27c6c5920
parent 7287 0347b42406e647d88d4ebfe55444f2f3c334ddd3
child 9608 8bba60eda697bca1822e06579c378349d308e894
permissions -rw-r--r--
Bug 604757 - Attendee status icon is missing r=philipp

/* -*- Mode: IDL; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
 * Version: MPL 1.1/GPL 2.0/LGPL 2.1
 *
 * The contents of this file are subject to the Mozilla Public License Version
 * 1.1 (the "License"); you may not use this file except in compliance with
 * the License. You may obtain a copy of the License at
 * http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS" basis,
 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
 * for the specific language governing rights and limitations under the
 * License.
 *
 * The Original Code is mozilla.org code.
 *
 * The Initial Developer of the Original Code is
 * Netscape Communications Corporation.
 * Portions created by the Initial Developer are Copyright (C) 1998
 * the Initial Developer. All Rights Reserved.
 *
 * Contributor(s):
 *   Eric Ballet Baz BT Global Services / Etat francais Ministere de la Defense
 *
 * Alternatively, the contents of this file may be used under the terms of
 * either of the GNU General Public License Version 2 or later (the "GPL"),
 * or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
 * in which case the provisions of the GPL or the LGPL are applicable instead
 * of those above. If you wish to allow use of your version of this file only
 * under the terms of either the GPL or the LGPL, and not to allow others to
 * use your version of this file under the terms of the MPL, indicate your
 * decision by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL or the LGPL. If you do not delete
 * the provisions above, a recipient may use your version of this file under
 * the terms of any one of the MPL, the GPL or the LGPL.
 *
 * ***** END LICENSE BLOCK ***** */

#include "nsISupports.idl"
#include "nsILocalFile.idl"

/**
 * This interface contains all the personal outgoing mail information
 * for a given person.
 * Each identity is identified by a key, which is the <id> string in
 * the identity preferences, such as in mail.identity.<id>.replyTo.
 */
[scriptable, uuid(98897ee8-42ac-11e0-94df-080027eef196)]
interface nsIMsgIdentity : nsISupports {
  /**
   * Internal preferences ID.
   */
  attribute ACString key;

  /**
   * Overriding display name for this identity. If this pref is not set
   * then this will return some composed string from the fullname and email.
   */
  attribute AString identityName;

  /**
   * User's full name, i.e. John Doe.
   */
  attribute AString fullName;

  /**
   * User's e-mail address, i.e. john@doe.com.
   */
  attribute ACString email;

  /**
   * Optional replyTo address, i.e. johnNOSPAM@doe.com.
   */
  attribute ACString replyTo;

  /**
   * Optional organization.
   */
  attribute AString organization;

  /**
   * Should we compose with HTML by default?
   */
  attribute boolean composeHtml;

  /**
   * Should we attach a signature from file?
   */
  attribute boolean attachSignature;

  /**
   * Should we attach a vcard by default?
   */
  attribute boolean attachVCard;

  /**
   * Should we automatically quote the original message?
   */
  attribute boolean autoQuote;

  /**
   * What should our quoting preference be?
   */
  attribute long replyOnTop;

  /**
   * Should our signature be at the end of the quoted text when replying
   * above it?
   */
  attribute boolean sigBottom;

  /**
   * Include a signature when forwarding a message?
   */
  attribute boolean sigOnForward;

  /**
   * Include a signature when replying to a message?
   */
  attribute boolean sigOnReply;

  /**
   * The current signature file.
   */
  attribute nsILocalFile signature;

  /**
   * Modification time of the signature file.
   */
  attribute long signatureDate;

  /**
   * Signature text if not read from file; format depends on htmlSigFormat.
   */
  attribute AString htmlSigText;

  /**
   * Does htmlSigText contain HTML? Use plain text if false.
   */
  attribute boolean htmlSigFormat;

  /**
   * Suppress the double-dash signature separator
   */
  attribute boolean suppressSigSep;

  /**
   * The encoded string representing the vcard.
   */
  attribute ACString escapedVCard;

  attribute boolean doFcc;
  /// URI for the fcc (Sent) folder
  attribute ACString fccFolder;
  attribute boolean fccReplyFollowsParent;

  /**
   * @{
   * these attributes control whether the special folder pickers for
   * fcc, drafts,archives, and templates are set to pick between servers
   * (e.g., Sent on accountName) or to pick any folder on any account.
   * "0" means choose between servers; "1" means use the full folder picker.
   */
  attribute ACString fccFolderPickerMode;
  attribute ACString draftsFolderPickerMode;
  attribute ACString archivesFolderPickerMode;
  attribute ACString tmplFolderPickerMode;
  /** @} */

  // Don't call bccSelf, bccOthers, and bccList directly, they are 
  // only used for migration and backward compatability. Use doBcc
  // and doBccList instead.
  attribute boolean bccSelf;
  attribute boolean bccOthers;
  attribute ACString bccList;

  attribute boolean doCc;
  attribute ACString doCcList;

  attribute boolean doBcc;
  attribute ACString doBccList;
  /**
   * @{
   * URIs for the special folders (drafts, templates, archive)
   */
  attribute ACString draftFolder;
  attribute ACString archiveFolder;
  attribute ACString stationeryFolder;
  /** @} */

  attribute boolean archiveEnabled;
  /**
   * @{
   * This attribute and constants control the granularity of sub-folders of the
   * Archives folder - either messages go in the single archive folder, or a
   * yearly archive folder, or in a monthly archive folder with a yearly
   * parent folder. If the server doesn't support folders that both contain
   * messages and have sub-folders, we will ignore this setting.
   */
  attribute long archiveGranularity;
  const long singleArchiveFolder = 0;
  const long perYearArchiveFolders = 1;
  const long perMonthArchiveFolders = 2;
  /// Maintain the source folder name when creating Archive subfolders
  attribute boolean archiveKeepFolderStructure;
  /** @} */

  attribute boolean showSaveMsgDlg;
  attribute ACString directoryServer;
  attribute boolean overrideGlobalPref;
  /**
   * If this is false, don't append the user's domain
   * to an autocomplete address with no matches
   */
   attribute boolean autocompleteToMyDomain;
  /**
   * valid determines if the UI should use this identity
   * and the wizard uses this to determine whether or not
   * to ask the user to complete all the fields
   */
  attribute boolean valid;

  /**
   * this is really dangerous. this destroys all pref values
   * do not call this unless you know what you're doing!
   */
  void clearAllValues();

  /**
   * the preferred smtp server for this identity.
   * if this is set, this the smtp server that should be used
   * for the message send
   */
  attribute ACString smtpServerKey;

  /**
   * default request for return receipt option for this identity
   * if this is set, the Return Receipt menu item on the compose
   * window will be checked
   */
  readonly attribute boolean requestReturnReceipt;
  readonly attribute long receiptHeaderType;

  /**
   * default request for DSN option for this identity
   * if this is set, the DSN menu item on the compose
   * window will be checked
   */
  readonly attribute boolean requestDSN;

  /* copy the attributes of the identity we pass in */
  void copy(in nsIMsgIdentity identity);

  /** 
   * these generic getter / setters, useful for extending mailnews 
   * note, these attributes persist across sessions
   */
  AString getUnicharAttribute(in string name);
  void setUnicharAttribute(in string name, in AString value);

  ACString getCharAttribute(in string name);
  void setCharAttribute(in string name, in ACString value);

  boolean getBoolAttribute(in string name);
  void setBoolAttribute(in string name, in boolean value);

  long getIntAttribute(in string name);
  void setIntAttribute(in string name, in long value);

  /* useful for debugging */
  AString toString();
};