Make the autoconf build use the same defines under Linux as the non-autoconf NSPR build.
authorcls%seawood.org
Sat, 04 Dec 1999 23:49:35 +0000
changeset 991 28a75bc2bce74ccbafc999cbd98a07d653167045
parent 990 dacc5e98c590c84f31940fbef01537bec45d7d5f
child 992 e34f21fd1a3cc265eb866d751ec11c582144b245
push idunknown
push userunknown
push dateunknown
Make the autoconf build use the same defines under Linux as the non-autoconf NSPR build.
configure
configure.in
--- a/configure
+++ b/configure
@@ -2754,18 +2754,30 @@ EOF
     esac
     ;;
 
 *-linux*)
     cat >> confdefs.h <<\EOF
 #define XP_UNIX 1
 EOF
 
-    CFLAGS="$CFLAGS -pipe"
-    CXXFLAGS="$CXXFLAGS -pipe"
+    cat >> confdefs.h <<\EOF
+#define _POSIX_SOURCE 1
+EOF
+
+    cat >> confdefs.h <<\EOF
+#define _BSD_SOURCE 1
+EOF
+
+    cat >> confdefs.h <<\EOF
+#define _SVID_SOURCE 1
+EOF
+
+    CFLAGS="$CFLAGS -pipe -ansi"
+    CXXFLAGS="$CXXFLAGS -pipe -ansi"
     MDCPUCFG_H=_linux.cfg
     PR_MD_CSRCS=linux.c
     MKSHLIB='$(LD) $(DSO_LDOPTS) -soname $(notdir $@) -o $@'
     DSO_CFLAGS=-fPIC
     DSO_LDOPTS=-shared
     case "${target_cpu}" in
     alpha)
         cat >> confdefs.h <<\EOF
@@ -2987,72 +2999,72 @@ esac
 if test "$enable_shared" = no; then
     MKSHLIB=
 fi
 
 
 
 
 echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:2996: checking how to run the C preprocessor" >&5
+echo "configure:3008: checking how to run the C preprocessor" >&5
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
 fi
 if test -z "$CPP"; then
 if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
     # This must be in double quotes, not single quotes, because CPP may get
   # substituted into the Makefile and "${CC-cc}" will confuse make.
   CPP="${CC-cc} -E"
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp.
   cat > conftest.$ac_ext <<EOF
-#line 3011 "configure"
+#line 3023 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3017: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3029: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
 else
   echo "$ac_err" >&5
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
   rm -rf conftest*
   CPP="${CC-cc} -E -traditional-cpp"
   cat > conftest.$ac_ext <<EOF
-#line 3028 "configure"
+#line 3040 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3034: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3046: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
 else
   echo "$ac_err" >&5
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
   rm -rf conftest*
   CPP="${CC-cc} -nologo -E"
   cat > conftest.$ac_ext <<EOF
-#line 3045 "configure"
+#line 3057 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3051: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3063: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
 else
   echo "$ac_err" >&5
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
   rm -rf conftest*
@@ -3068,23 +3080,23 @@ fi
   CPP="$ac_cv_prog_CPP"
 else
   ac_cv_prog_CPP="$CPP"
 fi
 echo "$ac_t""$CPP" 1>&6
 
 if test $ac_cv_prog_gcc = yes; then
     echo $ac_n "checking whether ${CC-cc} needs -traditional""... $ac_c" 1>&6
-echo "configure:3077: checking whether ${CC-cc} needs -traditional" >&5
+echo "configure:3089: checking whether ${CC-cc} needs -traditional" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc_traditional'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
     ac_pattern="Autoconf.*'x'"
   cat > conftest.$ac_ext <<EOF
-#line 3083 "configure"
+#line 3095 "configure"
 #include "confdefs.h"
 #include <sgtty.h>
 Autoconf TIOCGETP
 EOF
 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
   egrep "$ac_pattern" >/dev/null 2>&1; then
   rm -rf conftest*
   ac_cv_prog_gcc_traditional=yes
@@ -3092,17 +3104,17 @@ else
   rm -rf conftest*
   ac_cv_prog_gcc_traditional=no
 fi
 rm -f conftest*
 
 
   if test $ac_cv_prog_gcc_traditional = no; then
     cat > conftest.$ac_ext <<EOF
-#line 3101 "configure"
+#line 3113 "configure"
 #include "confdefs.h"
 #include <termio.h>
 Autoconf TCGETA
 EOF
 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
   egrep "$ac_pattern" >/dev/null 2>&1; then
   rm -rf conftest*
   ac_cv_prog_gcc_traditional=yes
@@ -3116,22 +3128,22 @@ echo "$ac_t""$ac_cv_prog_gcc_traditional
   if test $ac_cv_prog_gcc_traditional = yes; then
     CC="$CC -traditional"
   fi
 fi
 
 for ac_func in lchown strerror
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3125: checking for $ac_func" >&5
+echo "configure:3137: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3130 "configure"
+#line 3142 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
 #include <assert.h>
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char $ac_func();
@@ -3144,17 +3156,17 @@ int main() {
 #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
 choke me
 #else
 $ac_func();
 #endif
 
 ; return 0; }
 EOF
-if { (eval echo configure:3153: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3165: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=no"
 fi
@@ -3172,36 +3184,36 @@ else
   echo "$ac_t""no" 1>&6
 fi
 done
 
 
 
 
 echo $ac_n "checking for pthread_attr_init in -lpthread""... $ac_c" 1>&6
-echo "configure:3181: checking for pthread_attr_init in -lpthread" >&5
+echo "configure:3193: checking for pthread_attr_init in -lpthread" >&5
 ac_lib_var=`echo pthread'_'pthread_attr_init | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_save_LIBS="$LIBS"
 LIBS="-lpthread  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 3189 "configure"
+#line 3201 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char pthread_attr_init();
 
 int main() {
 pthread_attr_init()
 ; return 0; }
 EOF
-if { (eval echo configure:3200: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3212: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=no"
 fi
@@ -3210,36 +3222,36 @@ LIBS="$ac_save_LIBS"
 
 fi
 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
   echo "$ac_t""yes" 1>&6
   _HAVE_PTHREADS=1 _PTHREAD_LDFLAGS="-lpthread"
 else
   echo "$ac_t""no" 1>&6
 echo $ac_n "checking for pthread_attr_init in -lc_r""... $ac_c" 1>&6
-echo "configure:3219: checking for pthread_attr_init in -lc_r" >&5
+echo "configure:3231: checking for pthread_attr_init in -lc_r" >&5
 ac_lib_var=`echo c_r'_'pthread_attr_init | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_save_LIBS="$LIBS"
 LIBS="-lc_r  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 3227 "configure"
+#line 3239 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char pthread_attr_init();
 
 int main() {
 pthread_attr_init()
 ; return 0; }
 EOF
-if { (eval echo configure:3238: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3250: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=no"
 fi
@@ -3248,36 +3260,36 @@ LIBS="$ac_save_LIBS"
 
 fi
 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
   echo "$ac_t""yes" 1>&6
   _HAVE_PTHREADS=1 _PTHREAD_LDFLAGS="-lc_r"
 else
   echo "$ac_t""no" 1>&6
 echo $ac_n "checking for pthread_attr_init in -lc""... $ac_c" 1>&6
-echo "configure:3257: checking for pthread_attr_init in -lc" >&5
+echo "configure:3269: checking for pthread_attr_init in -lc" >&5
 ac_lib_var=`echo c'_'pthread_attr_init | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_save_LIBS="$LIBS"
 LIBS="-lc  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 3265 "configure"
+#line 3277 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char pthread_attr_init();
 
 int main() {
 pthread_attr_init()
 ; return 0; }
 EOF
-if { (eval echo configure:3276: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3288: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=no"
 fi
@@ -3394,17 +3406,17 @@ if test "${enable_ipv6+set}" = set; then
       fi
 fi
 
 
 if test -n "$USE_PTHREADS"; then
       rm -f conftest*
    ac_cv_have_dash_pthread=no
    echo $ac_n "checking whether ${CC-cc} accepts -pthread""... $ac_c" 1>&6
-echo "configure:3403: checking whether ${CC-cc} accepts -pthread" >&5
+echo "configure:3415: checking whether ${CC-cc} accepts -pthread" >&5
    echo 'int main() { return 0; }' | cat > conftest.c
    ${CC-cc} -pthread -o conftest conftest.c > conftest.out 2>&1
    if test $? -eq 0; then
 	if test -z "`egrep -i '(unrecognize|unknown)' conftest.out | grep pthread`" && test -z "`egrep -i '(error|incorrect)' conftest.out`" ; then
 	    ac_cv_have_dash_pthread=yes
 	    CFLAGS="$CFLAGS -pthread"
 	    CXXFLAGS="$CXXFLAGS -pthread"
 	fi
@@ -3464,22 +3476,22 @@ EOF
 	    cat >> confdefs.h <<\EOF
 #define _REENTRANT 1
 EOF
 
 	    ;;
     esac
 
     echo $ac_n "checking for pthread_create""... $ac_c" 1>&6
-echo "configure:3473: checking for pthread_create" >&5
+echo "configure:3485: checking for pthread_create" >&5
 if eval "test \"`echo '$''{'ac_cv_func_pthread_create'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3478 "configure"
+#line 3490 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char pthread_create(); below.  */
 #include <assert.h>
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char pthread_create();
@@ -3492,17 +3504,17 @@ int main() {
 #if defined (__stub_pthread_create) || defined (__stub___pthread_create)
 choke me
 #else
 pthread_create();
 #endif
 
 ; return 0; }
 EOF
-if { (eval echo configure:3501: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3513: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_pthread_create=yes"
 else
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
   rm -rf conftest*
   eval "ac_cv_func_pthread_create=no"
 fi
@@ -3511,36 +3523,36 @@ fi
 
 if eval "test \"`echo '$ac_cv_func_'pthread_create`\" = yes"; then
   echo "$ac_t""yes" 1>&6
   :
 else
   echo "$ac_t""no" 1>&6
 
        echo $ac_n "checking for pthread_create in -lpthread""... $ac_c" 1>&6
-echo "configure:3520: checking for pthread_create in -lpthread" >&5
+echo "configure:3532: checking for pthread_create in -lpthread" >&5
 ac_lib_var=`echo pthread'_'pthread_create | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_save_LIBS="$LIBS"
 LIBS="-lpthread  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 3528 "configure"
+#line 3540 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char pthread_create();
 
 int main() {
 pthread_create()
 ; return 0; }
 EOF
-if { (eval echo configure:3539: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3551: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=no"
 fi
@@ -3629,22 +3641,22 @@ EOF
                 PR_MD_ASFILES="$PR_MD_ASFILES os_SunOS_32.s"
             fi
         fi
     fi
     ;;
 esac
 
 echo $ac_n "checking for dlopen""... $ac_c" 1>&6
-echo "configure:3638: checking for dlopen" >&5
+echo "configure:3650: checking for dlopen" >&5
 if eval "test \"`echo '$''{'ac_cv_func_dlopen'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3643 "configure"
+#line 3655 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char dlopen(); below.  */
 #include <assert.h>
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char dlopen();
@@ -3657,17 +3669,17 @@ int main() {
 #if defined (__stub_dlopen) || defined (__stub___dlopen)
 choke me
 #else
 dlopen();
 #endif
 
 ; return 0; }
 EOF
-if { (eval echo configure:3666: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3678: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_dlopen=yes"
 else
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
   rm -rf conftest*
   eval "ac_cv_func_dlopen=no"
 fi
@@ -3676,36 +3688,36 @@ fi
 
 if eval "test \"`echo '$ac_cv_func_'dlopen`\" = yes"; then
   echo "$ac_t""yes" 1>&6
   :
 else
   echo "$ac_t""no" 1>&6
 
     echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
-echo "configure:3685: checking for dlopen in -ldl" >&5
+echo "configure:3697: checking for dlopen in -ldl" >&5
 ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_save_LIBS="$LIBS"
 LIBS="-ldl  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 3693 "configure"
+#line 3705 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char dlopen();
 
 int main() {
 dlopen()
 ; return 0; }
 EOF
-if { (eval echo configure:3704: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3716: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=no"
 fi
--- a/configure.in
+++ b/configure.in
@@ -538,18 +538,21 @@ case "$target" in
 	    AC_DEFINE(_POSIX_SOURCE)
 	    AC_DEFINE(_BSD_SOURCE)
 	    ;;
     esac
     ;;
 
 *-linux*)
     AC_DEFINE(XP_UNIX)
-    CFLAGS="$CFLAGS -pipe"
-    CXXFLAGS="$CXXFLAGS -pipe"
+    AC_DEFINE(_POSIX_SOURCE)
+    AC_DEFINE(_BSD_SOURCE)
+    AC_DEFINE(_SVID_SOURCE)
+    CFLAGS="$CFLAGS -pipe -ansi"
+    CXXFLAGS="$CXXFLAGS -pipe -ansi"
     MDCPUCFG_H=_linux.cfg
     PR_MD_CSRCS=linux.c
     MKSHLIB='$(LD) $(DSO_LDOPTS) -soname $(notdir $@) -o $@'
     DSO_CFLAGS=-fPIC
     DSO_LDOPTS=-shared
     case "${target_cpu}" in
     alpha)
         AC_DEFINE(_ALPHA_)