bug 700376 - Support for building NSPR on Gonk. Patch by Michael Wu <mwu@mozilla.com>, r=ted
authorted.mielczarek%gmail.com
Tue, 13 Dec 2011 19:16:30 +0000
changeset 4365 091749666eac9b7b9772f33e728fdd1bb807387c
parent 4364 c92881710e73d98c30790c6d658054a196f540e0
child 4366 ebcad5a31fa64b3a17c9549e3eb70012d60da91d
push idunknown
push userunknown
push dateunknown
reviewersted
bugs700376
bug 700376 - Support for building NSPR on Gonk. Patch by Michael Wu <mwu@mozilla.com>, r=ted
configure
configure.in
--- a/configure
+++ b/configure
@@ -16,16 +16,19 @@ ac_help="$ac_help
                       location where the Android NDK can be found"
 ac_help="$ac_help
   --with-android-toolchain=DIR
                             location of the android toolchain, default NDK/build/prebuilt/HOST/arm-eabi-4.4.0"
 ac_help="$ac_help
   --with-android-platform=DIR
                            location of platform dir, default NDK/build/platforms/android-5/arch-arm"
 ac_help="$ac_help
+  --with-gonk=DIR
+               location of gonk dir"
+ac_help="$ac_help
   --with-dist-prefix=DIST_PREFIX
                           place build files in DIST_PREFIX [dist]"
 ac_help="$ac_help
   --with-dist-bindir=DIR  build execuatables in DIR [DIST_PREFIX/bin]"
 ac_help="$ac_help
   --with-dist-includedir=DIR
                           build include files in DIR [DIST_PREFIX/include/nspr]"
 ac_help="$ac_help
@@ -662,17 +665,17 @@ esac
 
 
 # Make sure we can run config.sub.
 if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
 else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:671: checking host system type" >&5
+echo "configure:674: checking host system type" >&5
 
 host_alias=$host
 case "$host_alias" in
 NONE)
   case $nonopt in
   NONE)
     if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
     else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
@@ -683,17 +686,17 @@ esac
 
 host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
 host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
 host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
 host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$host" 1>&6
 
 echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:692: checking target system type" >&5
+echo "configure:695: checking target system type" >&5
 
 target_alias=$target
 case "$target_alias" in
 NONE)
   case $nonopt in
   NONE) target_alias=$host_alias ;;
   *) target_alias=$nonopt ;;
   esac ;;
@@ -701,17 +704,17 @@ esac
 
 target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
 target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
 target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
 target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$target" 1>&6
 
 echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:710: checking build system type" >&5
+echo "configure:713: checking build system type" >&5
 
 build_alias=$build
 case "$build_alias" in
 NONE)
   case $nonopt in
   NONE) build_alias=$host_alias ;;
   *) build_alias=$nonopt ;;
   esac ;;
@@ -777,17 +780,17 @@ case "$target" in
 *-cygwin*|*-mingw*)
     # Check to see if we are really running in a msvc environemnt
     _WIN32_MSVC=
     for ac_prog in cl
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:786: checking for $ac_word" >&5
+echo "configure:789: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -869,25 +872,53 @@ arm-android-eabi)
 i?86-*android*)
     android_tool_prefix="i686-android-linux"
     ;;
 *)
     android_tool_prefix="$target_os"
     ;;
 esac
 
+
+# Check whether --with-gonk or --without-gonk was given.
+if test "${with_gonk+set}" = set; then
+  withval="$with_gonk"
+  gonkdir=$withval
+fi
+
+
+if test -n "$gonkdir" ; then
+    
+        if test -z "$HOST_CPPFLAGS" ; then
+        HOST_CPPFLAGS=" "
+    fi
+    if test -z "$HOST_CFLAGS" ; then
+        HOST_CFLAGS=" "
+    fi
+    if test -z "$HOST_CXXFLAGS" ; then
+        HOST_CXXFLAGS=" "
+    fi
+    if test -z "$HOST_LDFLAGS" ; then
+        HOST_LDFLAGS=" "
+    fi
+
+    cat >> confdefs.h <<\EOF
+#define ANDROID 1
+EOF
+
+else
 case "$target" in
 *-android*|*-linuxandroid*)
     if test -z "$android_ndk" ; then
        { echo "configure: error: You must specify --with-android-ndk=/path/to/ndk when targeting Android." 1>&2; exit 1; }
     fi
 
     if test -z "$android_toolchain" ; then
         echo $ac_n "checking for android toolchain directory""... $ac_c" 1>&6
-echo "configure:886: checking for android toolchain directory" >&5
+echo "configure:917: checking for android toolchain directory" >&5
 
         kernel_name=`uname -s | tr "[:upper:]" "[:lower:]"`
 
         android_toolchain="$android_ndk"/build/prebuilt/$kernel_name-x86/arm-eabi-4.4.0
 
         # With newer NDK, the toolchain path has changed.
         if ! test -d "$android_toolchain" ; then
             android_toolchain="$android_ndk"/toolchains/arm-$kernel_name-androideabi-4.4.3/prebuilt/$kernel_name-x86
@@ -897,17 +928,17 @@ echo "configure:886: checking for androi
             echo "$ac_t""$android_toolchain" 1>&6
         else
             { echo "configure: error: not found. You have to specify --with-android-toolchain=/path/to/ndk/toolchain." 1>&2; exit 1; }
         fi
     fi
 
     if test -z "$android_platform" ; then
         echo $ac_n "checking for android platform directory""... $ac_c" 1>&6
-echo "configure:906: checking for android platform directory" >&5
+echo "configure:937: checking for android platform directory" >&5
 
         android_platform="$android_ndk"/build/platforms/android-5/arch-arm
 
         # With newer NDK, the platform path has changed.
         if ! test -d "$android_platform" ; then
             android_platform="$android_ndk"/platforms/android-5/arch-arm
         fi
 
@@ -946,16 +977,17 @@ echo "configure:906: checking for androi
     fi
 
     cat >> confdefs.h <<\EOF
 #define ANDROID 1
 EOF
 
     ;;
 esac
+fi
 
 dist_prefix='${MOD_DEPTH}/dist'
 dist_bindir='${dist_prefix}/bin'
 dist_includedir='${dist_prefix}/include/nspr'
 dist_libdir='${dist_prefix}/lib'
 if test "${includedir}" = '${prefix}/include'; then
     includedir='${prefix}/include/nspr'
 fi
@@ -1239,17 +1271,17 @@ if test -z "$CXX"; then
 
     esac
 fi
 
 if test -z "$SKIP_PATH_CHECKS"; then
     # Extract the first word of "$WHOAMI whoami", so it can be a program name with args.
 set dummy $WHOAMI whoami; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1248: checking for $ac_word" >&5
+echo "configure:1280: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_WHOAMI'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$WHOAMI" in
   /*)
   ac_cv_path_WHOAMI="$WHOAMI" # Let the user override the test with a path.
   ;;
   ?:/*)			 
@@ -1311,23 +1343,23 @@ if test "$target" != "$host" -o -n "$CRO
     echo "cross compiling from $host to $target"
     cross_compiling=yes
 
     _SAVE_CC="$CC"
     _SAVE_CFLAGS="$CFLAGS"
     _SAVE_LDFLAGS="$LDFLAGS"
 
     echo $ac_n "checking for $host compiler""... $ac_c" 1>&6
-echo "configure:1320: checking for $host compiler" >&5
+echo "configure:1352: checking for $host compiler" >&5
     for ac_prog in $HOST_CC gcc cc /usr/ucb/cc
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1326: checking for $ac_word" >&5
+echo "configure:1358: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_HOST_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$HOST_CC"; then
   ac_cv_prog_HOST_CC="$HOST_CC" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -1363,26 +1395,26 @@ test -n "$HOST_CC" || HOST_CC=""""
         HOST_LDFLAGS="$LDFLAGS"
     fi
 
     CC="$HOST_CC"
     CFLAGS="$HOST_CFLAGS"
     LDFLAGS="$HOST_LDFLAGS"
 
     echo $ac_n "checking whether the $host compiler ($HOST_CC $HOST_CFLAGS $HOST_LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1372: checking whether the $host compiler ($HOST_CC $HOST_CFLAGS $HOST_LDFLAGS) works" >&5
+echo "configure:1404: checking whether the $host compiler ($HOST_CC $HOST_CFLAGS $HOST_LDFLAGS) works" >&5
     cat > conftest.$ac_ext <<EOF
-#line 1374 "configure"
+#line 1406 "configure"
 #include "confdefs.h"
 
 int main() {
 return(0);
 ; return 0; }
 EOF
-if { (eval echo configure:1381: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1413: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_prog_host_cc_works=1 echo "$ac_t""yes" 1>&6
 else
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
   rm -rf conftest*
   { echo "configure: error: installation or configuration problem: $host compiler $HOST_CC cannot create executables." 1>&2; exit 1; } 
 fi
@@ -1407,17 +1439,17 @@ rm -f conftest*
         ;;
     esac
 
     for ac_prog in $CC "${target_alias}-gcc" "${target}-gcc"
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1416: checking for $ac_word" >&5
+echo "configure:1448: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -1441,17 +1473,17 @@ fi
 test -n "$CC" && break
 done
 test -n "$CC" || CC="echo"
 
     unset ac_cv_prog_CC
     # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1450: checking for $ac_word" >&5
+echo "configure:1482: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -1471,17 +1503,17 @@ if test -n "$CC"; then
 else
   echo "$ac_t""no" 1>&6
 fi
 
 if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1480: checking for $ac_word" >&5
+echo "configure:1512: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_prog_rejected=no
@@ -1522,17 +1554,17 @@ else
 fi
 
   if test -z "$CC"; then
     case "`uname -s`" in
     *win32* | *WIN32*)
       # Extract the first word of "cl", so it can be a program name with args.
 set dummy cl; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1531: checking for $ac_word" >&5
+echo "configure:1563: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -1554,33 +1586,33 @@ else
 fi
  ;;
     esac
   fi
   test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1563: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1595: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
 ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
 cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 1574 "configure"
+#line 1606 "configure"
 #include "confdefs.h"
 
 main(){return(0);}
 EOF
-if { (eval echo configure:1579: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1611: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
     ac_cv_prog_cc_cross=no
   else
     ac_cv_prog_cc_cross=yes
   fi
 else
@@ -1596,31 +1628,31 @@ ac_compile='${CC-cc} -c $CFLAGS $CPPFLAG
 ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
 if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1605: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1637: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1610: checking whether we are using GNU C" >&5
+echo "configure:1642: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.c <<EOF
 #ifdef __GNUC__
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1619: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1651: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
 fi
 fi
 
 echo "$ac_t""$ac_cv_prog_gcc" 1>&6
 
@@ -1629,17 +1661,17 @@ if test $ac_cv_prog_gcc = yes; then
 else
   GCC=
 fi
 
 ac_test_CFLAGS="${CFLAGS+set}"
 ac_save_CFLAGS="$CFLAGS"
 CFLAGS=
 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1638: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1670: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   echo 'void f(){}' > conftest.c
 if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
   ac_cv_prog_cc_g=yes
 else
   ac_cv_prog_cc_g=no
@@ -1666,17 +1698,17 @@ else
 fi
 
     if test -n "$USE_CPLUS"; then
         for ac_prog in $CXX "${target_alias}-g++" "${target}-g++"
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1675: checking for $ac_word" >&5
+echo "configure:1707: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CXX"; then
   ac_cv_prog_CXX="$CXX" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -1702,17 +1734,17 @@ done
 test -n "$CXX" || CXX="echo"
 
         unset ac_cv_prog_CXX
         for ac_prog in $CCC c++ g++ gcc CC cxx cc++ cl
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1711: checking for $ac_word" >&5
+echo "configure:1743: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CXX"; then
   ac_cv_prog_CXX="$CXX" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -1734,33 +1766,33 @@ else
 fi
 
 test -n "$CXX" && break
 done
 test -n "$CXX" || CXX="gcc"
 
 
 echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1743: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
+echo "configure:1775: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
 
 ac_ext=C
 # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
 ac_cpp='$CXXCPP $CPPFLAGS'
 ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
 ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
 cross_compiling=$ac_cv_prog_cxx_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 1754 "configure"
+#line 1786 "configure"
 #include "confdefs.h"
 
 int main(){return(0);}
 EOF
-if { (eval echo configure:1759: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1791: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cxx_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
     ac_cv_prog_cxx_cross=no
   else
     ac_cv_prog_cxx_cross=yes
   fi
 else
@@ -1776,31 +1808,31 @@ ac_compile='${CC-cc} -c $CFLAGS $CPPFLAG
 ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo "$ac_t""$ac_cv_prog_cxx_works" 1>&6
 if test $ac_cv_prog_cxx_works = no; then
   { echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1785: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1817: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6
 cross_compiling=$ac_cv_prog_cxx_cross
 
 echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6
-echo "configure:1790: checking whether we are using GNU C++" >&5
+echo "configure:1822: checking whether we are using GNU C++" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.C <<EOF
 #ifdef __GNUC__
   yes;
 #endif
 EOF
-if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1799: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1831: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gxx=yes
 else
   ac_cv_prog_gxx=no
 fi
 fi
 
 echo "$ac_t""$ac_cv_prog_gxx" 1>&6
 
@@ -1809,17 +1841,17 @@ if test $ac_cv_prog_gxx = yes; then
 else
   GXX=
 fi
 
 ac_test_CXXFLAGS="${CXXFLAGS+set}"
 ac_save_CXXFLAGS="$CXXFLAGS"
 CXXFLAGS=
 echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
-echo "configure:1818: checking whether ${CXX-g++} accepts -g" >&5
+echo "configure:1850: checking whether ${CXX-g++} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   echo 'void f(){}' > conftest.cc
 if test -z "`${CXX-g++} -g -c conftest.cc 2>&1`"; then
   ac_cv_prog_cxx_g=yes
 else
   ac_cv_prog_cxx_g=no
@@ -1854,17 +1886,17 @@ fi
         ;;
     esac
 
     for ac_prog in $RANLIB "${target_alias}-ranlib" "${target}-ranlib"
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1863: checking for $ac_word" >&5
+echo "configure:1895: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$RANLIB"; then
   ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -1889,17 +1921,17 @@ test -n "$RANLIB" && break
 done
 test -n "$RANLIB" || RANLIB="echo"
 
     for ac_prog in $AR "${target_alias}-ar" "${target}-ar"
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1898: checking for $ac_word" >&5
+echo "configure:1930: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$AR"; then
   ac_cv_prog_AR="$AR" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -1924,17 +1956,17 @@ test -n "$AR" && break
 done
 test -n "$AR" || AR="echo"
 
     for ac_prog in $AS "${target_alias}-as" "${target}-as"
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1933: checking for $ac_word" >&5
+echo "configure:1965: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$AS"; then
   ac_cv_prog_AS="$AS" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -1959,17 +1991,17 @@ test -n "$AS" && break
 done
 test -n "$AS" || AS="echo"
 
     for ac_prog in $LD "${target_alias}-ld" "${target}-ld"
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1968: checking for $ac_word" >&5
+echo "configure:2000: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$LD"; then
   ac_cv_prog_LD="$LD" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -1994,17 +2026,17 @@ test -n "$LD" && break
 done
 test -n "$LD" || LD="echo"
 
     for ac_prog in $STRIP "${target_alias}-strip" "${target}-strip"
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2003: checking for $ac_word" >&5
+echo "configure:2035: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$STRIP"; then
   ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -2029,17 +2061,17 @@ test -n "$STRIP" && break
 done
 test -n "$STRIP" || STRIP="echo"
 
     for ac_prog in $WINDRES "${target_alias}-windres" "${target}-windres"
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2038: checking for $ac_word" >&5
+echo "configure:2070: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$WINDRES"; then
   ac_cv_prog_WINDRES="$WINDRES" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -2064,17 +2096,17 @@ test -n "$WINDRES" && break
 done
 test -n "$WINDRES" || WINDRES="echo"
 
 
 else
     # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2073: checking for $ac_word" >&5
+echo "configure:2105: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -2094,17 +2126,17 @@ if test -n "$CC"; then
 else
   echo "$ac_t""no" 1>&6
 fi
 
 if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2103: checking for $ac_word" >&5
+echo "configure:2135: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_prog_rejected=no
@@ -2145,17 +2177,17 @@ else
 fi
 
   if test -z "$CC"; then
     case "`uname -s`" in
     *win32* | *WIN32*)
       # Extract the first word of "cl", so it can be a program name with args.
 set dummy cl; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2154: checking for $ac_word" >&5
+echo "configure:2186: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -2177,33 +2209,33 @@ else
 fi
  ;;
     esac
   fi
   test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:2186: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:2218: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
 ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
 cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 2197 "configure"
+#line 2229 "configure"
 #include "confdefs.h"
 
 main(){return(0);}
 EOF
-if { (eval echo configure:2202: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2234: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
     ac_cv_prog_cc_cross=no
   else
     ac_cv_prog_cc_cross=yes
   fi
 else
@@ -2219,31 +2251,31 @@ ac_compile='${CC-cc} -c $CFLAGS $CPPFLAG
 ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
 if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2228: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:2260: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:2233: checking whether we are using GNU C" >&5
+echo "configure:2265: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.c <<EOF
 #ifdef __GNUC__
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2242: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2274: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
 fi
 fi
 
 echo "$ac_t""$ac_cv_prog_gcc" 1>&6
 
@@ -2252,17 +2284,17 @@ if test $ac_cv_prog_gcc = yes; then
 else
   GCC=
 fi
 
 ac_test_CFLAGS="${CFLAGS+set}"
 ac_save_CFLAGS="$CFLAGS"
 CFLAGS=
 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2261: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:2293: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   echo 'void f(){}' > conftest.c
 if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
   ac_cv_prog_cc_g=yes
 else
   ac_cv_prog_cc_g=no
@@ -2292,17 +2324,17 @@ fi
         if test "$CC" = "cl" -a -z "$CXX"; then
             CXX=$CC
         else        
             for ac_prog in $CCC c++ g++ gcc CC cxx cc++ cl
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2301: checking for $ac_word" >&5
+echo "configure:2333: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CXX"; then
   ac_cv_prog_CXX="$CXX" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -2324,33 +2356,33 @@ else
 fi
 
 test -n "$CXX" && break
 done
 test -n "$CXX" || CXX="gcc"
 
 
 echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:2333: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
+echo "configure:2365: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
 
 ac_ext=C
 # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
 ac_cpp='$CXXCPP $CPPFLAGS'
 ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
 ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
 cross_compiling=$ac_cv_prog_cxx_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 2344 "configure"
+#line 2376 "configure"
 #include "confdefs.h"
 
 int main(){return(0);}
 EOF
-if { (eval echo configure:2349: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2381: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cxx_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
     ac_cv_prog_cxx_cross=no
   else
     ac_cv_prog_cxx_cross=yes
   fi
 else
@@ -2366,31 +2398,31 @@ ac_compile='${CC-cc} -c $CFLAGS $CPPFLAG
 ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo "$ac_t""$ac_cv_prog_cxx_works" 1>&6
 if test $ac_cv_prog_cxx_works = no; then
   { echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2375: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:2407: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6
 cross_compiling=$ac_cv_prog_cxx_cross
 
 echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6
-echo "configure:2380: checking whether we are using GNU C++" >&5
+echo "configure:2412: checking whether we are using GNU C++" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.C <<EOF
 #ifdef __GNUC__
   yes;
 #endif
 EOF
-if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:2389: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:2421: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gxx=yes
 else
   ac_cv_prog_gxx=no
 fi
 fi
 
 echo "$ac_t""$ac_cv_prog_gxx" 1>&6
 
@@ -2399,17 +2431,17 @@ if test $ac_cv_prog_gxx = yes; then
 else
   GXX=
 fi
 
 ac_test_CXXFLAGS="${CXXFLAGS+set}"
 ac_save_CXXFLAGS="$CXXFLAGS"
 CXXFLAGS=
 echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
-echo "configure:2408: checking whether ${CXX-g++} accepts -g" >&5
+echo "configure:2440: checking whether ${CXX-g++} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   echo 'void f(){}' > conftest.cc
 if test -z "`${CXX-g++} -g -c conftest.cc 2>&1`"; then
   ac_cv_prog_cxx_g=yes
 else
   ac_cv_prog_cxx_g=no
@@ -2433,72 +2465,72 @@ else
   else
     CXXFLAGS=
   fi
 fi
 
         fi
     fi
     echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:2442: checking how to run the C preprocessor" >&5
+echo "configure:2474: checking how to run the C preprocessor" >&5
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
 fi
 if test -z "$CPP"; then
 if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
     # This must be in double quotes, not single quotes, because CPP may get
   # substituted into the Makefile and "${CC-cc}" will confuse make.
   CPP="${CC-cc} -E"
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp.
   cat > conftest.$ac_ext <<EOF
-#line 2457 "configure"
+#line 2489 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2463: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2495: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
 else
   echo "$ac_err" >&5
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
   rm -rf conftest*
   CPP="${CC-cc} -E -traditional-cpp"
   cat > conftest.$ac_ext <<EOF
-#line 2474 "configure"
+#line 2506 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2480: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2512: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
 else
   echo "$ac_err" >&5
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
   rm -rf conftest*
   CPP="${CC-cc} -nologo -E"
   cat > conftest.$ac_ext <<EOF
-#line 2491 "configure"
+#line 2523 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2497: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2529: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
 else
   echo "$ac_err" >&5
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
   rm -rf conftest*
@@ -2515,17 +2547,17 @@ fi
 else
   ac_cv_prog_CPP="$CPP"
 fi
 echo "$ac_t""$CPP" 1>&6
 
     # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2524: checking for $ac_word" >&5
+echo "configure:2556: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$RANLIB"; then
   ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -2547,17 +2579,17 @@ else
   echo "$ac_t""no" 1>&6
 fi
 
     for ac_prog in as
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2556: checking for $ac_word" >&5
+echo "configure:2588: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$AS" in
   /*)
   ac_cv_path_AS="$AS" # Let the user override the test with a path.
   ;;
   ?:/*)			 
@@ -2588,17 +2620,17 @@ test -n "$AS" && break
 done
 test -n "$AS" || AS="$CC"
 
     for ac_prog in ar
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2597: checking for $ac_word" >&5
+echo "configure:2629: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$AR" in
   /*)
   ac_cv_path_AR="$AR" # Let the user override the test with a path.
   ;;
   ?:/*)			 
@@ -2629,17 +2661,17 @@ test -n "$AR" && break
 done
 test -n "$AR" || AR="echo not_ar"
 
     for ac_prog in ld link
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2638: checking for $ac_word" >&5
+echo "configure:2670: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$LD" in
   /*)
   ac_cv_path_LD="$LD" # Let the user override the test with a path.
   ;;
   ?:/*)			 
@@ -2670,17 +2702,17 @@ test -n "$LD" && break
 done
 test -n "$LD" || LD="echo not_ld"
 
     for ac_prog in strip
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2679: checking for $ac_word" >&5
+echo "configure:2711: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_STRIP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$STRIP" in
   /*)
   ac_cv_path_STRIP="$STRIP" # Let the user override the test with a path.
   ;;
   ?:/*)			 
@@ -2711,17 +2743,17 @@ test -n "$STRIP" && break
 done
 test -n "$STRIP" || STRIP="echo not_strip"
 
     for ac_prog in windres
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2720: checking for $ac_word" >&5
+echo "configure:2752: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$WINDRES" in
   /*)
   ac_cv_path_WINDRES="$WINDRES" # Let the user override the test with a path.
   ;;
   ?:/*)			 
@@ -2779,39 +2811,39 @@ esac
 
 if test "$cross_compiling"  = "yes"; then
     CROSS_COMPILE=1
 else
     CROSS_COMPILE=
 fi
 
 echo $ac_n "checking for gcc -pipe support""... $ac_c" 1>&6
-echo "configure:2788: checking for gcc -pipe support" >&5
+echo "configure:2820: checking for gcc -pipe support" >&5
 if test -n "$GNU_CC" && test -n "$GNU_CXX" && test -n "$GNU_AS"; then
     echo '#include <stdio.h>' > dummy-hello.c
     echo 'int main() { printf("Hello World\n"); return 0; }' >> dummy-hello.c
     ${CC} -S dummy-hello.c -o dummy-hello.s 2>&5
     cat dummy-hello.s | ${AS} -o dummy-hello.S - 2>&5
     if test $? = 0; then
         _res_as_stdin="yes"
     else
         _res_as_stdin="no"
     fi
     if test "$_res_as_stdin" = "yes"; then
         _SAVE_CFLAGS=$CFLAGS
         CFLAGS="$CFLAGS -pipe"
         cat > conftest.$ac_ext <<EOF
-#line 2803 "configure"
+#line 2835 "configure"
 #include "confdefs.h"
  #include <stdio.h> 
 int main() {
 printf("Hello World\n");
 ; return 0; }
 EOF
-if { (eval echo configure:2810: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2842: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   _res_gcc_pipe="yes"
 else
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
   rm -rf conftest*
   _res_gcc_pipe="no" 
 fi
@@ -2831,26 +2863,26 @@ else
     echo "$ac_t""no" 1>&6
 fi
 
 
 _SAVE_CFLAGS="$CFLAGS"
 CFLAGS="$CFLAGS -fprofile-generate -fprofile-correction"
 
 echo $ac_n "checking whether C compiler supports -fprofile-generate""... $ac_c" 1>&6
-echo "configure:2840: checking whether C compiler supports -fprofile-generate" >&5
+echo "configure:2872: checking whether C compiler supports -fprofile-generate" >&5
 cat > conftest.$ac_ext <<EOF
-#line 2842 "configure"
+#line 2874 "configure"
 #include "confdefs.h"
 
 int main() {
 return 0;
 ; return 0; }
 EOF
-if { (eval echo configure:2849: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2881: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
    PROFILE_GEN_CFLAGS="-fprofile-generate"
                  result="yes" 
 else
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
   rm -rf conftest*
   result="no"
@@ -2863,17 +2895,17 @@ if test $result = "yes"; then
    PROFILE_USE_CFLAGS="-fprofile-use -fprofile-correction -Wcoverage-mismatch"
    PROFILE_USE_LDFLAGS="-fprofile-use"
 fi
 
 CFLAGS="$_SAVE_CFLAGS"
 
 if test "$GNU_CC"; then
     echo $ac_n "checking for visibility(hidden) attribute""... $ac_c" 1>&6
-echo "configure:2872: checking for visibility(hidden) attribute" >&5
+echo "configure:2904: checking for visibility(hidden) attribute" >&5
 if eval "test \"`echo '$''{'ac_cv_visibility_hidden'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.c <<EOF
         int foo __attribute__ ((visibility ("hidden"))) = 1;
 EOF
         ac_cv_visibility_hidden=no
         if ${CC-cc} -Werror -S conftest.c -o conftest.s >/dev/null 2>&1; then
@@ -2887,17 +2919,17 @@ fi
 
 echo "$ac_t""$ac_cv_visibility_hidden" 1>&6
     if test "$ac_cv_visibility_hidden" = "yes"; then
         cat >> confdefs.h <<\EOF
 #define HAVE_VISIBILITY_HIDDEN_ATTRIBUTE 1
 EOF
 
         echo $ac_n "checking for visibility pragma support""... $ac_c" 1>&6
-echo "configure:2896: checking for visibility pragma support" >&5
+echo "configure:2928: checking for visibility pragma support" >&5
 if eval "test \"`echo '$''{'ac_cv_visibility_pragma'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.c <<EOF
 #pragma GCC visibility push(hidden)
             int foo_hidden = 1;
 #pragma GCC visibility push(default)
             int foo_default = 1;
@@ -2940,17 +2972,17 @@ fi # GNU_CC
 fi # SKIP_COMPILER_CHECKS
 
 if test -z "$SKIP_PATH_CHECKS"; then
     for ac_prog in perl5 perl
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2949: checking for $ac_word" >&5
+echo "configure:2981: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_PERL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$PERL" in
   /*)
   ac_cv_path_PERL="$PERL" # Let the user override the test with a path.
   ;;
   ?:/*)			 
@@ -3261,24 +3293,24 @@ yes)
 no)
     MOZ_THUMB2=
     thumb_flag="-marm"
     ;;
 *)
     _SAVE_CFLAGS="$CFLAGS"
     CFLAGS="$arch_flag"
     cat > conftest.$ac_ext <<EOF
-#line 3270 "configure"
+#line 3302 "configure"
 #include "confdefs.h"
 
 int main() {
 return sizeof(__thumb2__);
 ; return 0; }
 EOF
-if { (eval echo configure:3277: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3309: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   MOZ_THUMB2=1
 else
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
   rm -rf conftest*
   MOZ_THUMB2=
 fi
@@ -3330,26 +3362,26 @@ no)
     ;;
 esac
 
 all_flags=`echo $arch_flag $thumb_flag $thumb_interwork_flag $fpu_flag $float_abi_flag $soft_float_flag`
 if test -n "$all_flags"; then
     _SAVE_CFLAGS="$CFLAGS"
     CFLAGS="$all_flags"
     echo $ac_n "checking whether the chosen combination of compiler flags ($all_flags) works""... $ac_c" 1>&6
-echo "configure:3339: checking whether the chosen combination of compiler flags ($all_flags) works" >&5
+echo "configure:3371: checking whether the chosen combination of compiler flags ($all_flags) works" >&5
     cat > conftest.$ac_ext <<EOF
-#line 3341 "configure"
+#line 3373 "configure"
 #include "confdefs.h"
 
 int main() {
 return 0;
 ; return 0; }
 EOF
-if { (eval echo configure:3348: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3380: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   echo "$ac_t""yes" 1>&6
 else
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
   rm -rf conftest*
   { echo "configure: error: no" 1>&2; exit 1; }
 fi
@@ -3396,27 +3428,27 @@ EOF
 
     cat >> confdefs.h <<\EOF
 #define SYSV 1
 EOF
 
     DSO_LDOPTS='-brtl -bnortllib -bM:SRE -bnoentry -bexpall -blibpath:/usr/lib:/lib'
     ac_safe=`echo "sys/atomic_op.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for sys/atomic_op.h""... $ac_c" 1>&6
-echo "configure:3405: checking for sys/atomic_op.h" >&5
+echo "configure:3437: checking for sys/atomic_op.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3410 "configure"
+#line 3442 "configure"
 #include "confdefs.h"
 #include <sys/atomic_op.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3415: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3447: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
   eval "ac_cv_header_$ac_safe=yes"
 else
   echo "$ac_err" >&5
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
@@ -3602,36 +3634,36 @@ EOF
     PR_MD_ARCH_DIR=beos
     RESOLVE_LINK_SYMBOLS=1
     case "${target_cpu}" in
     i*86)
         _OPTIMIZE_FLAGS=-O2
         _DEBUG_FLAGS='-gdwarf-2 -O0'
         MKSHLIB='$(CCC) $(DSO_LDOPTS) -o $@'
         echo $ac_n "checking for gethostbyaddr in -lbind""... $ac_c" 1>&6
-echo "configure:3611: checking for gethostbyaddr in -lbind" >&5
+echo "configure:3643: checking for gethostbyaddr in -lbind" >&5
 ac_lib_var=`echo bind'_'gethostbyaddr | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_save_LIBS="$LIBS"
 LIBS="-lbind  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 3619 "configure"
+#line 3651 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char gethostbyaddr();
 
 int main() {
 gethostbyaddr()
 ; return 0; }
 EOF
-if { (eval echo configure:3630: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3662: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=no"
 fi
@@ -3830,27 +3862,27 @@ EOF
             CPU_ARCH=ppc
             ;;
     esac
     if test "`echo $CC | grep -c '\-arch '`" = "0"; then
         CC="$CC -arch $CPU_ARCH"
     fi
     ac_safe=`echo "crt_externs.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for crt_externs.h""... $ac_c" 1>&6
-echo "configure:3839: checking for crt_externs.h" >&5
+echo "configure:3871: checking for crt_externs.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3844 "configure"
+#line 3876 "configure"
 #include "confdefs.h"
 #include <crt_externs.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3849: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3881: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
   eval "ac_cv_header_$ac_safe=yes"
 else
   echo "$ac_err" >&5
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
@@ -5014,27 +5046,27 @@ EOF
     if test -z "$GNU_CC"; then
         CC="$CC -std1 -ieee_with_inexact"
         if test "$OS_RELEASE" != "V2.0"; then
             CC="$CC -readonly_strings"
         fi
         _OPTIMIZE_FLAGS="$_OPTIMIZE_FLAGS -Olimit 4000"
         ac_safe=`echo "machine/builtins.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for machine/builtins.h""... $ac_c" 1>&6
-echo "configure:5023: checking for machine/builtins.h" >&5
+echo "configure:5055: checking for machine/builtins.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5028 "configure"
+#line 5060 "configure"
 #include "confdefs.h"
 #include <machine/builtins.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5033: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5065: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
   eval "ac_cv_header_$ac_safe=yes"
 else
   echo "$ac_err" >&5
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
@@ -5673,63 +5705,63 @@ if test -z "$SKIP_LIBRARY_CHECKS"; then
 
 
 
 case $target in
 *-darwin*|*-beos*|*-os2*)
     ;;
 *)
     echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
-echo "configure:5682: checking for dlopen in -ldl" >&5
+echo "configure:5714: checking for dlopen in -ldl" >&5
 ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_save_LIBS="$LIBS"
 LIBS="-ldl  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 5690 "configure"
+#line 5722 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char dlopen();
 
 int main() {
 dlopen()
 ; return 0; }
 EOF
-if { (eval echo configure:5701: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5733: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=no"
 fi
 rm -f conftest*
 LIBS="$ac_save_LIBS"
 
 fi
 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
   echo "$ac_t""yes" 1>&6
   ac_safe=`echo "dlfcn.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for dlfcn.h""... $ac_c" 1>&6
-echo "configure:5718: checking for dlfcn.h" >&5
+echo "configure:5750: checking for dlfcn.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5723 "configure"
+#line 5755 "configure"
 #include "confdefs.h"
 #include <dlfcn.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5728: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5760: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
   eval "ac_cv_header_$ac_safe=yes"
 else
   echo "$ac_err" >&5
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
@@ -5752,23 +5784,23 @@ fi
     ;;
 esac
 
 
 
 
 if test $ac_cv_prog_gcc = yes; then
     echo $ac_n "checking whether ${CC-cc} needs -traditional""... $ac_c" 1>&6
-echo "configure:5761: checking whether ${CC-cc} needs -traditional" >&5
+echo "configure:5793: checking whether ${CC-cc} needs -traditional" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc_traditional'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
     ac_pattern="Autoconf.*'x'"
   cat > conftest.$ac_ext <<EOF
-#line 5767 "configure"
+#line 5799 "configure"
 #include "confdefs.h"
 #include <sgtty.h>
 Autoconf TIOCGETP
 EOF
 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
   egrep "$ac_pattern" >/dev/null 2>&1; then
   rm -rf conftest*
   ac_cv_prog_gcc_traditional=yes
@@ -5776,17 +5808,17 @@ else
   rm -rf conftest*
   ac_cv_prog_gcc_traditional=no
 fi
 rm -f conftest*
 
 
   if test $ac_cv_prog_gcc_traditional = no; then
     cat > conftest.$ac_ext <<EOF
-#line 5785 "configure"
+#line 5817 "configure"
 #include "confdefs.h"
 #include <termio.h>
 Autoconf TCGETA
 EOF
 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
   egrep "$ac_pattern" >/dev/null 2>&1; then
   rm -rf conftest*
   ac_cv_prog_gcc_traditional=yes
@@ -5800,22 +5832,22 @@ echo "$ac_t""$ac_cv_prog_gcc_traditional
   if test $ac_cv_prog_gcc_traditional = yes; then
     CC="$CC -traditional"
   fi
 fi
 
 for ac_func in lchown strerror
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5809: checking for $ac_func" >&5
+echo "configure:5841: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5814 "configure"
+#line 5846 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
 #include <assert.h>
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char $ac_func();
@@ -5828,17 +5860,17 @@ int main() {
 #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
 choke me
 #else
 $ac_func();
 #endif
 
 ; return 0; }
 EOF
-if { (eval echo configure:5837: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5869: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=no"
 fi
@@ -5879,17 +5911,17 @@ if test "$CCACHE" != "no"; then
             fi
         fi
     fi
     for ac_prog in $CCACHE ccache
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5888: checking for $ac_word" >&5
+echo "configure:5920: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_CCACHE'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$CCACHE" in
   /*)
   ac_cv_path_CCACHE="$CCACHE" # Let the user override the test with a path.
   ;;
   ?:/*)			 
@@ -5938,17 +5970,17 @@ if test "${enable_strip+set}" = set; the
 fi
 
 
 case "${target_os}" in
 hpux*)
 if test -z "$GNU_CC"; then
 
     echo $ac_n "checking for +Olit support""... $ac_c" 1>&6
-echo "configure:5947: checking for +Olit support" >&5
+echo "configure:5979: checking for +Olit support" >&5
 if eval "test \"`echo '$''{'ac_cv_hpux_usable_olit_option'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
                   ac_cv_hpux_usable_olit_option=no
         rm -f conftest*
         echo 'int main() { return 0; }' | cat > conftest.c
         ${CC-cc} ${CFLAGS} +Olit=all -o conftest conftest.c > conftest.out 2>&1
         if test $? -eq 0; then
@@ -5980,17 +6012,17 @@ darwin*)
     _HAVE_PTHREADS=1
     ;;
 wince*)
     _HAVE_PTHREADS=
     ;;
 *)
     
 echo $ac_n "checking for pthread_create in -lpthreads""... $ac_c" 1>&6
-echo "configure:5989: checking for pthread_create in -lpthreads" >&5
+echo "configure:6021: checking for pthread_create in -lpthreads" >&5
 echo "
     #include <pthread.h> 
     void *foo(void *v) { return v; } 
     int main() { 
         pthread_t t;
         if (!pthread_create(&t, 0, &foo, 0)) {
             pthread_join(t, 0);
         }
@@ -6002,17 +6034,17 @@ echo "
     rm -f dummy.c dummy${ac_exeext} ;
     if test "$_res" = "0"; then
         echo "$ac_t""yes" 1>&6
         _HAVE_PTHREADS=1 _PTHREAD_LDFLAGS="-lpthreads"
     else
         echo "$ac_t""no" 1>&6
         
 echo $ac_n "checking for pthread_create in -lpthread""... $ac_c" 1>&6
-echo "configure:6011: checking for pthread_create in -lpthread" >&5
+echo "configure:6043: checking for pthread_create in -lpthread" >&5
 echo "
     #include <pthread.h> 
     void *foo(void *v) { return v; } 
     int main() { 
         pthread_t t;
         if (!pthread_create(&t, 0, &foo, 0)) {
             pthread_join(t, 0);
         }
@@ -6024,17 +6056,17 @@ echo "
     rm -f dummy.c dummy${ac_exeext} ;
     if test "$_res" = "0"; then
         echo "$ac_t""yes" 1>&6
         _HAVE_PTHREADS=1 _PTHREAD_LDFLAGS="-lpthread"
     else
         echo "$ac_t""no" 1>&6
         
 echo $ac_n "checking for pthread_create in -lc_r""... $ac_c" 1>&6
-echo "configure:6033: checking for pthread_create in -lc_r" >&5
+echo "configure:6065: checking for pthread_create in -lc_r" >&5
 echo "
     #include <pthread.h> 
     void *foo(void *v) { return v; } 
     int main() { 
         pthread_t t;
         if (!pthread_create(&t, 0, &foo, 0)) {
             pthread_join(t, 0);
         }
@@ -6046,17 +6078,17 @@ echo "
     rm -f dummy.c dummy${ac_exeext} ;
     if test "$_res" = "0"; then
         echo "$ac_t""yes" 1>&6
         _HAVE_PTHREADS=1 _PTHREAD_LDFLAGS="-lc_r"
     else
         echo "$ac_t""no" 1>&6
         
 echo $ac_n "checking for pthread_create in -lc""... $ac_c" 1>&6
-echo "configure:6055: checking for pthread_create in -lc" >&5
+echo "configure:6087: checking for pthread_create in -lc" >&5
 echo "
     #include <pthread.h> 
     void *foo(void *v) { return v; } 
     int main() { 
         pthread_t t;
         if (!pthread_create(&t, 0, &foo, 0)) {
             pthread_join(t, 0);
         }
@@ -6164,17 +6196,17 @@ if test "${enable_ipv6+set}" = set; then
       fi
 fi
 
 
 if test -n "$USE_PTHREADS"; then
       rm -f conftest*
    ac_cv_have_dash_pthread=no
    echo $ac_n "checking whether ${CC-cc} accepts -pthread""... $ac_c" 1>&6
-echo "configure:6173: checking whether ${CC-cc} accepts -pthread" >&5
+echo "configure:6205: checking whether ${CC-cc} accepts -pthread" >&5
    echo 'int main() { return 0; }' | cat > conftest.c
    ${CC-cc} -pthread -o conftest conftest.c > conftest.out 2>&1
    if test $? -eq 0; then
 	if test -z "`egrep -i '(unrecognize|unknown)' conftest.out | grep pthread`" && test -z "`egrep -i '(error|incorrect)' conftest.out`" ; then
 	    ac_cv_have_dash_pthread=yes
 		case "$target_os" in
 	    freebsd*)
 # Freebsd doesn't use -pthread for compiles, it uses them for linking
@@ -6187,17 +6219,17 @@ echo "configure:6173: checking whether $
 	fi
     fi
     rm -f conftest*
     echo "$ac_t""$ac_cv_have_dash_pthread" 1>&6
 
 			    ac_cv_have_dash_pthreads=no
     if test "$ac_cv_have_dash_pthread" = "no"; then
 	    echo $ac_n "checking whether ${CC-cc} accepts -pthreads""... $ac_c" 1>&6
-echo "configure:6196: checking whether ${CC-cc} accepts -pthreads" >&5
+echo "configure:6228: checking whether ${CC-cc} accepts -pthreads" >&5
     	echo 'int main() { return 0; }' | cat > conftest.c
 	    ${CC-cc} -pthreads -o conftest conftest.c > conftest.out 2>&1
     	if test $? -eq 0; then
 	    	if test -z "`egrep -i '(unrecognize|unknown)' conftest.out | grep pthreads`" && test -z "`egrep -i '(error|incorrect)' conftest.out`" ; then
 			    ac_cv_have_dash_pthreads=yes
 			    CFLAGS="$CFLAGS -pthreads"
 			    CXXFLAGS="$CXXFLAGS -pthreads"
 		    fi
--- a/configure.in
+++ b/configure.in
@@ -161,16 +161,46 @@ arm-android-eabi)
 i?86-*android*)
     android_tool_prefix="i686-android-linux"
     ;;
 *)
     android_tool_prefix="$target_os"
     ;;
 esac
 
+dnl ========================================================
+dnl = Gonk is a fork of Android used for Mozilla's B2G project.
+dnl = Configuration is done largely by the top level config
+dnl = and the specified gonk directory doesn't matter here.
+dnl ========================================================
+
+AC_ARG_WITH(gonk,
+[  --with-gonk=DIR
+               location of gonk dir],
+    gonkdir=$withval)
+
+if test -n "$gonkdir" ; then
+    dnl Most things are directly configured by env vars when building for gonk
+
+    dnl prevent cross compile section from using these flags as host flags
+    if test -z "$HOST_CPPFLAGS" ; then
+        HOST_CPPFLAGS=" "
+    fi
+    if test -z "$HOST_CFLAGS" ; then
+        HOST_CFLAGS=" "
+    fi
+    if test -z "$HOST_CXXFLAGS" ; then
+        HOST_CXXFLAGS=" "
+    fi
+    if test -z "$HOST_LDFLAGS" ; then
+        HOST_LDFLAGS=" "
+    fi
+
+    AC_DEFINE(ANDROID)
+else
 case "$target" in
 *-android*|*-linuxandroid*)
     if test -z "$android_ndk" ; then
        AC_MSG_ERROR([You must specify --with-android-ndk=/path/to/ndk when targeting Android.])
     fi
 
     if test -z "$android_toolchain" ; then
         AC_MSG_CHECKING([for android toolchain directory])
@@ -235,16 +265,17 @@ case "$target" in
     fi
     if test -z "$HOST_LDFLAGS" ; then
         HOST_LDFLAGS=" "
     fi
 
     AC_DEFINE(ANDROID)
     ;;
 esac
+fi
 
 dnl ========================================================
 dnl =
 dnl = Check options that may affect the compiler
 dnl =
 dnl ========================================================
 dist_prefix='${MOD_DEPTH}/dist'
 dist_bindir='${dist_prefix}/bin'