build/upload.py
author Ted Mielczarek <ted.mielczarek@gmail.com>
Thu, 13 Nov 2008 17:50:27 +0100
changeset 21615 b9926411d750d5803770c64290d54844802a6eea
parent 21611 f3d9ccfea0a3425a23d5217cb3cd7a6673cc8f83
child 22680 26413234cbfa76eda82e6ce0172f51dd3532a88c
permissions -rw-r--r--
Followup fix for bug 454594 (need a makefile target that can upload files via ssh). r=bsmedberg, NPOB

#!/usr/bin/python
#
# ***** BEGIN LICENSE BLOCK *****
# Version: MPL 1.1/GPL 2.0/LGPL 2.1
#
# The contents of this file are subject to the Mozilla Public License Version
# 1.1 (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
# http://www.mozilla.org/MPL/
#
# Software distributed under the License is distributed on an "AS IS" basis,
# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
# for the specific language governing rights and limitations under the
# License.
#
# The Original Code is mozilla.org code.
#
# The Initial Developer of the Original Code is
# The Mozilla Foundation 
# Portions created by the Initial Developer are Copyright (C) 2008
# the Initial Developer. All Rights Reserved.
#
# Contributor(s):
#  Ted Mielczarek <ted.mielczarek@gmail.com>
#
# Alternatively, the contents of this file may be used under the terms of
# either the GNU General Public License Version 2 or later (the "GPL"), or
# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
# in which case the provisions of the GPL or the LGPL are applicable instead
# of those above. If you wish to allow use of your version of this file only
# under the terms of either the GPL or the LGPL, and not to allow others to
# use your version of this file under the terms of the MPL, indicate your
# decision by deleting the provisions above and replace them with the notice
# and other provisions required by the GPL or the LGPL. If you do not delete
# the provisions above, a recipient may use your version of this file under
# the terms of any one of the MPL, the GPL or the LGPL.
#
# ***** END LICENSE BLOCK *****
#
# When run directly, this script expects the following environment variables
# to be set:
# UPLOAD_HOST    : host to upload files to
# UPLOAD_USER    : username on that host
# UPLOAD_PATH    : path on that host to put the files in
#
# And will use the following optional environment variables if set:
# UPLOAD_SSH_KEY : path to a ssh private key to use
# UPLOAD_PORT    : port to use for ssh
# POST_UPLOAD_CMD: a commandline to run on the remote host after uploading.
#                  UPLOAD_PATH and the full paths of all files uploaded will
#                  be appended to the commandline.
#
# All files to be uploaded should be passed as commandline arguments to this
# script. The script takes one other parameter, --base-path, which you can use
# to indicate that files should be uploaded including their paths relative
# to the base path.

import sys, os
from optparse import OptionParser
from util import check_call

def RequireEnvironmentVariable(v):
    """Return the value of the environment variable named v, or print
    an error and exit if it's unset (or empty)."""
    if not v in os.environ or os.environ[v] == "":
        print "Error: required environment variable %s not set" % v
        sys.exit(1)
    return os.environ[v]

def OptionalEnvironmentVariable(v):
    """Return the value of the environment variable named v, or None
    if it's unset (or empty)."""
    if v in os.environ and os.environ[v] != "":
        return os.environ[v]
    return None

def FixupMsysPath(path):
    """MSYS helpfully translates absolute pathnames in environment variables
    and commandline arguments into Windows native paths. This sucks if you're
    trying to pass an absolute path on a remote server. This function attempts
    to un-mangle such paths."""
    if 'OSTYPE' in os.environ and os.environ['OSTYPE'] == 'msys':
        # sort of awful, find out where our shell is (should be in msys/bin)
        # and strip the first part of that path out of the other path
        if 'SHELL' in os.environ:
            sh = os.environ['SHELL']
            msys = sh[:sh.find('/bin')]
            if path.startswith(msys):
                path = path[len(msys):]
    return path

def WindowsPathToMsysPath(path):
    """Translate a Windows pathname to an MSYS pathname.
    Necessary because we call out to ssh/scp, which are MSYS binaries
    and expect MSYS paths."""
    if sys.platform != 'win32':
        return path
    (drive, path) = os.path.splitdrive(os.path.abspath(path))     
    return "/" + drive[0] + path.replace('\\','/')

def AppendOptionalArgsToSSHCommandline(cmdline, port, ssh_key):
    """Given optional port and ssh key values, append valid OpenSSH
    commandline arguments to the list cmdline if the values are not None."""
    if port is not None:
        cmdline.append("-P%d" % port)
    if ssh_key is not None:
        cmdline.extend(["-i", WindowsPathToMsysPath(ssh_key)])

def DoSSHCommand(command, user, host, port=None, ssh_key=None):
    """Execute command on user@host using ssh. Optionally use
    port and ssh_key, if provided."""
    cmdline = ["ssh"]
    AppendOptionalArgsToSSHCommandline(cmdline, port, ssh_key)
    cmdline.extend(["%s@%s" % (user, host), command])
    check_call(cmdline)

def DoSCPFile(file, remote_path, user, host, port=None, ssh_key=None):
    """Upload file to user@host:remote_path using scp. Optionally use
    port and ssh_key, if provided."""
    cmdline = ["scp"]
    AppendOptionalArgsToSSHCommandline(cmdline, port, ssh_key)
    cmdline.extend([WindowsPathToMsysPath(file),
                    "%s@%s:%s" % (user, host, remote_path)])
    check_call(cmdline)

def GetRemotePath(path, local_file, base_path):
    """Given a remote path to upload to, a full path to a local file, and an
    optional full path that is a base path of the local file, construct the
    full remote path to place the file in. If base_path is not None, include
    the relative path from base_path to file."""
    if base_path is None or not local_file.startswith(base_path):
        return path
    dir = os.path.dirname(local_file)
    # strip base_path + extra slash and make it unixy
    dir = dir[len(base_path)+1:].replace('\\','/')
    return path + dir

def UploadFiles(user, host, path, files, verbose=False, port=None, ssh_key=None, base_path=None, post_upload_command=None):
    """Upload each file in the list files to user@host:path. Optionally pass
    port and ssh_key to the ssh commands. If base_path is not None, upload
    files including their path relative to base_path. If post_upload_command
    is not None, execute that command on the remote host after uploading
    all files, passing it the upload path, and the full paths to all files
    uploaded. If verbose is True, print status updates while working."""
    if not path.endswith("/"):
        path += "/"
    if base_path is not None:
        base_path = os.path.abspath(base_path)
    remote_files = []
    for file in files:
        file = os.path.abspath(file)
        if not os.path.isfile(file):
            raise IOError("File not found: %s" % file)
        # first ensure that path exists remotely
        remote_path = GetRemotePath(path, file, base_path)
        DoSSHCommand("mkdir -p " + remote_path, user, host, port=port, ssh_key=ssh_key)
        if verbose:
            print "Uploading " + file
        DoSCPFile(file, remote_path, user, host, port=port, ssh_key=ssh_key)
        remote_files.append(remote_path + '/' + os.path.basename(file))
    if post_upload_command is not None:
        if verbose:
            print "Running post-upload command: " + post_upload_command
        file_list = '"' + '" "'.join(remote_files) + '"'
        DoSSHCommand('%s "%s" %s' % (post_upload_command, path, file_list), user, host, port=port, ssh_key=ssh_key)
    if verbose:
        print "Upload complete"

if __name__ == '__main__':
    host = RequireEnvironmentVariable('UPLOAD_HOST')
    user = RequireEnvironmentVariable('UPLOAD_USER')
    path = RequireEnvironmentVariable('UPLOAD_PATH')
    port = int(OptionalEnvironmentVariable('UPLOAD_PORT'))
    key = OptionalEnvironmentVariable('UPLOAD_SSH_KEY')
    post_upload_command = OptionalEnvironmentVariable('POST_UPLOAD_CMD')
    if sys.platform == 'win32':
        path = FixupMsysPath(path)
        post_upload_command = FixupMsysPath(post_upload_command)

    parser = OptionParser(usage="usage: %prog [options] <files>")
    parser.add_option("-b", "--base-path",
                      action="store", dest="base_path",
                      help="Preserve file paths relative to this path when uploading. If unset, all files will be uploaded directly to UPLOAD_PATH.")
    (options, args) = parser.parse_args()
    if len(args) < 1:
        print "You must specify at least one file to upload"
        sys.exit(1)
    try:
        UploadFiles(user, host, path, args, base_path=options.base_path,
                    port=port, ssh_key=key, post_upload_command=post_upload_command,
                    verbose=True)
    except IOError, (strerror):
        print strerror
    except Exception, (err):
        print err