gfx/layers/ReadbackLayer.h
author Jeff Muizelaar <jmuizelaar@mozilla.com>
Fri, 13 Apr 2012 14:56:51 -0400
changeset 91758 773b2db48d0cbb43eb33896b2073e27cf8dfbecb
parent 77799 e7854b4d29ba905ae3994f821b160c989bac4260
child 94475 f4157e8c410708d76703f19e4dfb61859bfe32d8
child 105226 cad26d2fb5af799dfe030fd2a8948d617eac2f52
permissions -rw-r--r--
Bug 735262. Make leaf address printing saner. r=bgirard We don't need to store an mLeafAddress field for each profile entry. Instead just add a 'l' tag for the leaf entries.

/* -*- Mode: C++; tab-width: 20; indent-tabs-mode: nil; c-basic-offset: 2 -*-
 * ***** BEGIN LICENSE BLOCK *****
 * Version: MPL 1.1/GPL 2.0/LGPL 2.1
 *
 * The contents of this file are subject to the Mozilla Public License Version
 * 1.1 (the "License"); you may not use this file except in compliance with
 * the License. You may obtain a copy of the License at
 * http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS" basis,
 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
 * for the specific language governing rights and limitations under the
 * License.
 *
 * The Original Code is Mozilla Corporation code.
 *
 * The Initial Developer of the Original Code is Mozilla Foundation.
 * Portions created by the Initial Developer are Copyright (C) 2011
 * the Initial Developer. All Rights Reserved.
 *
 * Contributor(s):
 *   Robert O'Callahan <robert@ocallahan.org>
 *
 * Alternatively, the contents of this file may be used under the terms of
 * either the GNU General Public License Version 2 or later (the "GPL"), or
 * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
 * in which case the provisions of the GPL or the LGPL are applicable instead
 * of those above. If you wish to allow use of your version of this file only
 * under the terms of either the GPL or the LGPL, and not to allow others to
 * use your version of this file under the terms of the MPL, indicate your
 * decision by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL or the LGPL. If you do not delete
 * the provisions above, a recipient may use your version of this file under
 * the terms of any one of the MPL, the GPL or the LGPL.
 *
 * ***** END LICENSE BLOCK ***** */

#ifndef GFX_READBACKLAYER_H
#define GFX_READBACKLAYER_H

#include "Layers.h"

namespace mozilla {
namespace layers {

class ReadbackProcessor;

/**
 * A ReadbackSink receives a stream of updates to a rectangle of pixels.
 * These update callbacks are always called on the main thread, either during
 * EndTransaction or from the event loop.
 */
class THEBES_API ReadbackSink {
public:
  ReadbackSink() {}
  virtual ~ReadbackSink() {}

  /**
   * Sends an update to indicate that the background is currently unknown.
   */
  virtual void SetUnknown(PRUint64 aSequenceNumber) = 0;
  /**
   * Called by the layer system to indicate that the contents of part of
   * the readback area are changing.
   * @param aRect is the rectangle of content that is being updated,
   * in the coordinate system of the ReadbackLayer.
   * @param aSequenceNumber updates issued out of order should be ignored.
   * Only use updates whose sequence counter is greater than all other updates
   * seen so far. Return null when a non-fresh sequence value is given.
   * @return a context into which the update should be drawn. This should be
   * set up to clip to aRect. Zero should never be passed as a sequence number.
   * If this returns null, EndUpdate should NOT be called. If it returns
   * non-null, EndUpdate must be called.
   *
   * We don't support partially unknown backgrounds. Therefore, the
   * first BeginUpdate after a SetUnknown will have the complete background.
   */
  virtual already_AddRefed<gfxContext>
      BeginUpdate(const nsIntRect& aRect, PRUint64 aSequenceNumber) = 0;
  /**
   * EndUpdate must be called immediately after BeginUpdate, without returning
   * to the event loop.
   * @param aContext the context returned by BeginUpdate
   * Implicitly Restore()s the state of aContext.
   */
  virtual void EndUpdate(gfxContext* aContext, const nsIntRect& aRect) = 0;
};

/**
 * A ReadbackLayer never renders anything. It enables clients to extract
 * the rendered contents of the layer tree below the ReadbackLayer.
 * The rendered contents are delivered asynchronously via calls to a
 * ReadbackSink object supplied by the client.
 *
 * This is a "best effort" API; it is possible for the layer system to tell
 * the ReadbackSink that the contents of the readback area are unknown.
 *
 * This API exists to work around the limitations of transparent windowless
 * plugin rendering APIs. It should not be used for anything else.
 */
class THEBES_API ReadbackLayer : public Layer {
public:
  MOZ_LAYER_DECL_NAME("ReadbackLayer", TYPE_READBACK)

  virtual void ComputeEffectiveTransforms(const gfx3DMatrix& aTransformToSurface)
  {
    // Snap our local transform first, and snap the inherited transform as well.
    // This makes our snapping equivalent to what would happen if our content
    // was drawn into a ThebesLayer (gfxContext would snap using the local
    // transform, then we'd snap again when compositing the ThebesLayer).
    mEffectiveTransform =
        SnapTransform(GetLocalTransform(), gfxRect(0, 0, mSize.width, mSize.height),
                      nsnull)*
        SnapTransform(aTransformToSurface, gfxRect(0, 0, 0, 0), nsnull);
  }

  /**
   * CONSTRUCTION PHASE ONLY
   * Set the callback object to which readback updates will be delivered.
   * This also resets the "needed rectangle" so that on the next layer tree
   * transaction we will try to deliver the full contents of the readback
   * area to the sink.
   * This layer takes ownership of the sink. It will be deleted when the
   * layer is destroyed or when a new sink is set.
   * Initially the contents of the readback area are completely unknown.
   */
  void SetSink(ReadbackSink* aSink)
  {
    SetUnknown();
    mSink = aSink;
  }
  ReadbackSink* GetSink() { return mSink; }

  /**
   * CONSTRUCTION PHASE ONLY
   * Set the size of content that should be read back. The readback area
   * has its top-left at 0,0 and has size aSize.
   * Can only be called while the sink is null!
   */
  void SetSize(const nsIntSize& aSize)
  {
    NS_ASSERTION(!mSink, "Should have no sink while changing size!");
    mSize = aSize;
  }
  const nsIntSize& GetSize() { return mSize; }
  nsIntRect GetRect() { return nsIntRect(nsIntPoint(0, 0), mSize); }

  bool IsBackgroundKnown()
  {
    return mBackgroundLayer || mBackgroundColor.a == 1.0;
  }

  void NotifyRemoved() {
    SetUnknown();
    mSink = nsnull;
  }

  void NotifyThebesLayerRemoved(ThebesLayer* aLayer)
  {
    if (mBackgroundLayer == aLayer) {
      mBackgroundLayer = nsnull;
    }
  }

  const nsIntPoint& GetBackgroundLayerOffset() { return mBackgroundLayerOffset; }

  PRUint64 AllocateSequenceNumber() { return ++mSequenceCounter; }

  void SetUnknown()
  {
    if (IsBackgroundKnown()) {
      if (mSink) {
        mSink->SetUnknown(AllocateSequenceNumber());
      }
      mBackgroundLayer = nsnull;
      mBackgroundColor = gfxRGBA(0,0,0,0);
    }
  }

protected:
  friend class ReadbackProcessor;

  ReadbackLayer(LayerManager* aManager, void* aImplData) :
    Layer(aManager, aImplData),
    mSequenceCounter(0),
    mSize(0,0),
    mBackgroundLayer(nsnull),
    mBackgroundLayerOffset(0, 0),
    mBackgroundColor(gfxRGBA(0,0,0,0))
  {}

  // Print interesting information about this into aTo.  Internally
  // used to implement Dump*() and Log*().
  virtual nsACString& PrintInfo(nsACString& aTo, const char* aPrefix);

  PRUint64 mSequenceCounter;
  nsAutoPtr<ReadbackSink> mSink;
  nsIntSize mSize;

  // This can refer to any (earlier) sibling ThebesLayer. That ThebesLayer
  // must have mUsedForReadback set on it. If the ThebesLayer is removed
  // for the container, this will be set to null by NotifyThebesLayerRemoved.
  // This ThebesLayer contains the contents which have previously been reported
  // to mSink. The ThebesLayer had only an integer translation transform,
  // and it covered the entire readback area. This layer also had only an
  // integer translation transform.
  ThebesLayer* mBackgroundLayer;
  // When mBackgroundLayer is non-null, this is the offset to add to
  // convert from the coordinates of mBackgroundLayer to the coordinates
  // of this layer.
  nsIntPoint   mBackgroundLayerOffset;
  // When mBackgroundColor is opaque, this is the color of the ColorLayer
  // that contained the contents we reported to mSink, which covered the
  // entire readback area.
  gfxRGBA      mBackgroundColor;
};

}
}
#endif /* GFX_READBACKLAYER_H */