tools/jprof/stub/libmalloc.cpp
author jorendorff@mozilla.com
Mon, 19 Nov 2007 15:25:08 -0600
changeset 8097 74d4f075ce54b6e8a77a88dfaaa1d0bf2f665c58
parent 1 9b2a99adc05e53cd4010de512f50118594756650
child 69590 9968ed6b629a1b2c937e0cb1053a56c91f96c2d2
permissions -rw-r--r--
Merging from cvs-trunk-mirror to mozilla-central.

/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
// vim:cindent:sw=4:et:ts=8:
/* ***** BEGIN LICENSE BLOCK *****
 * Version: MPL 1.1/GPL 2.0/LGPL 2.1
 *
 * The contents of this file are subject to the Mozilla Public License Version
 * 1.1 (the "License"); you may not use this file except in compliance with
 * the License. You may obtain a copy of the License at
 * http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS" basis,
 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
 * for the specific language governing rights and limitations under the
 * License.
 *
 * The Original Code is mozilla.org code.
 *
 * The Initial Developer of the Original Code is Netscape Communications Corp.
 * Portions created by the Initial Developer are Copyright (C) 1998
 * the Initial Developer. All Rights Reserved.
 *
 * Contributor(s):
 *   Jim Nance
 *   L. David Baron - JP_REALTIME, JPROF_PTHREAD_HACK, and SIGUSR1 handling
 *   Mike Shaver - JP_RTC_HZ support
 *
 * Alternatively, the contents of this file may be used under the terms of
 * either the GNU General Public License Version 2 or later (the "GPL"), or
 * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
 * in which case the provisions of the GPL or the LGPL are applicable instead
 * of those above. If you wish to allow use of your version of this file only
 * under the terms of either the GPL or the LGPL, and not to allow others to
 * use your version of this file under the terms of the MPL, indicate your
 * decision by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL or the LGPL. If you do not delete
 * the provisions above, a recipient may use your version of this file under
 * the terms of any one of the MPL, the GPL or the LGPL.
 *
 * ***** END LICENSE BLOCK ***** */

// The linux glibc hides part of sigaction if _POSIX_SOURCE is defined
#if defined(linux)
#undef _POSIX_SOURCE
#undef _SVID_SOURCE
#ifndef _GNU_SOURCE
#define _GNU_SOURCE
#endif
#endif

#include <errno.h>
#if defined(linux)
#include <linux/rtc.h>
#include <pthread.h>
#endif
#include <unistd.h>
#include <fcntl.h>
#include <stdio.h>
#include <stdlib.h>
#include <signal.h>
#include <sys/time.h>
#include <sys/types.h>
#include <sys/ioctl.h>
#include <sys/stat.h>
#include <ucontext.h>

#include "libmalloc.h"
#include "jprof.h"
#include <string.h>
#include <errno.h>
#include <dlfcn.h>


#ifdef NTO
#include <sys/link.h>
extern r_debug _r_debug;
#else
#include <link.h>
#endif

static int gLogFD = -1;
static pthread_t main_thread;

static void startSignalCounter(unsigned long millisec);
static int enableRTCSignals(bool enable);


//----------------------------------------------------------------------

#if defined(i386) || defined(_i386) || defined(__x86_64__)
static void CrawlStack(malloc_log_entry* me,
                       void* stack_top, void* top_instr_ptr)
{
  void **bp;
#if defined(__i386)
  __asm__( "movl %%ebp, %0" : "=g"(bp));
#elif defined(__x86_64__)
  __asm__( "movq %%rbp, %0" : "=g"(bp));
#else
  // It would be nice if this worked uniformly, but at least on i386 and
  // x86_64, it stopped working with gcc 4.1, because it points to the
  // end of the saved registers instead of the start.
  bp = __builtin_frame_address(0);
#endif
  u_long numpcs = 0;

  me->pcs[numpcs++] = (char*) top_instr_ptr;

  while (numpcs < MAX_STACK_CRAWL) {
    void** nextbp = (void**) *bp++;
    void* pc = *bp;
    if (nextbp < bp) {
      break;
    }
    if (bp > stack_top) {
      // Skip the signal handling.
      me->pcs[numpcs++] = (char*) pc;
    }
    bp = nextbp;
  }
  me->numpcs = numpcs;
}
#endif

//----------------------------------------------------------------------

static int rtcHz;
static int rtcFD = -1;

#if defined(linux) || defined(NTO)
static void DumpAddressMap()
{
  // Turn off the timer so we don't get interrupts during shutdown
#if defined(linux)
  if (rtcHz) {
    enableRTCSignals(false);
  } else
#endif
  {
    startSignalCounter(0);
  }

  int mfd = open(M_MAPFILE, O_CREAT|O_WRONLY|O_TRUNC, 0666);
  if (mfd >= 0) {
    malloc_map_entry mme;
    link_map* map = _r_debug.r_map;
    while (NULL != map) {
      if (map->l_name && *map->l_name) {
	mme.nameLen = strlen(map->l_name);
	mme.address = map->l_addr;
	write(mfd, &mme, sizeof(mme));
	write(mfd, map->l_name, mme.nameLen);
#if 0
	write(1, map->l_name, mme.nameLen);
	write(1, "\n", 1);
#endif
      }
      map = map->l_next;
    }
    close(mfd);
  }
}
#endif

static void EndProfilingHook(int signum)
{
    DumpAddressMap();
    puts("Jprof: profiling paused.");
}

//----------------------------------------------------------------------

static void
Log(u_long aTime, void* stack_top, void* top_instr_ptr)
{
  // Static is simply to make debugging tollerable
  static malloc_log_entry me;

  me.delTime = aTime;

  CrawlStack(&me, stack_top, top_instr_ptr);

#ifndef NTO
  write(gLogFD, &me, offsetof(malloc_log_entry, pcs) + me.numpcs*sizeof(char*));
#else
  printf("Neutrino is missing the pcs member of malloc_log_entry!! \n");
#endif
}

static int realTime;

/* Lets interrupt at 10 Hz.  This is so my log files don't get too large.
 * This can be changed to a faster value latter.  This timer is not
 * programmed to reset, even though it is capable of doing so.  This is
 * to keep from getting interrupts from inside of the handler.
*/
static void startSignalCounter(unsigned long millisec)
{
    struct itimerval tvalue;

    tvalue.it_interval.tv_sec = 0;
    tvalue.it_interval.tv_usec = 0;
    tvalue.it_value.tv_sec = millisec/1000;
    tvalue.it_value.tv_usec = (millisec%1000)*1000;

    if (realTime) {
	setitimer(ITIMER_REAL, &tvalue, NULL);
    } else {
    	setitimer(ITIMER_PROF, &tvalue, NULL);
    }
}

static long timerMiliSec = 50;

#if defined(linux)
static int setupRTCSignals(int hz, struct sigaction *sap)
{
    /* global */ rtcFD = open("/dev/rtc", O_RDONLY);
    if (rtcFD < 0) {
        perror("JPROF_RTC setup: open(\"/dev/rtc\", O_RDONLY)");
        return 0;
    }

    if (sigaction(SIGIO, sap, NULL) == -1) {
        perror("JPROF_RTC setup: sigaction(SIGIO)");
        return 0;
    }

    if (ioctl(rtcFD, RTC_IRQP_SET, hz) == -1) {
        perror("JPROF_RTC setup: ioctl(/dev/rtc, RTC_IRQP_SET, $JPROF_RTC_HZ)");
        return 0;
    }

    if (ioctl(rtcFD, RTC_PIE_ON, 0) == -1) {
        perror("JPROF_RTC setup: ioctl(/dev/rtc, RTC_PIE_ON)");
        return 0;
    }

    if (fcntl(rtcFD, F_SETSIG, 0) == -1) {
        perror("JPROF_RTC setup: fcntl(/dev/rtc, F_SETSIG, 0)");
        return 0;
    }

    if (fcntl(rtcFD, F_SETOWN, getpid()) == -1) {
        perror("JPROF_RTC setup: fcntl(/dev/rtc, F_SETOWN, getpid())");
        return 0;
    }

    return 1;
}

static int enableRTCSignals(bool enable)
{
    static bool enabled = false;
    if (enabled == enable) {
        return 0;
    }
    enabled = enable;
    
    int flags = fcntl(rtcFD, F_GETFL);
    if (flags < 0) {
        perror("JPROF_RTC setup: fcntl(/dev/rtc, F_GETFL)");
        return 0;
    }

    if (enable) {
        flags |= FASYNC;
    } else {
        flags &= ~FASYNC;
    }

    if (fcntl(rtcFD, F_SETFL, flags) == -1) {
        if (enable) {
            perror("JPROF_RTC setup: fcntl(/dev/rtc, F_SETFL, flags | FASYNC)");
        } else {
            perror("JPROF_RTC setup: fcntl(/dev/rtc, F_SETFL, flags & ~FASYNC)");
        }            
        return 0;
    }

    return 1;
}
#endif

static void StackHook(
int signum,
siginfo_t *info,
void *ucontext)
{
    static struct timeval tFirst;
    static int first=1;
    size_t millisec = 0;

#if defined(linux)
    if (rtcHz && pthread_self() != main_thread) {
      // Only collect stack data on the main thread, for now.
      return;
    }
#endif

    if(first && !(first=0)) {
        puts("Jprof: received first signal");
#if defined(linux)
        if (rtcHz) {
            enableRTCSignals(true);
        } else
#endif
        {
            gettimeofday(&tFirst, 0);
            millisec = 0;
        }
    } else {
#if defined(linux)
        if (rtcHz) {
            enableRTCSignals(true);
        } else
#endif
        {
            struct timeval tNow;
            gettimeofday(&tNow, 0);
            double usec = 1e6*(tNow.tv_sec - tFirst.tv_sec);
            usec += (tNow.tv_usec - tFirst.tv_usec);
            millisec = static_cast<size_t>(usec*1e-3);
        }
    }

    gregset_t &gregs = ((ucontext_t*)ucontext)->uc_mcontext.gregs;
#ifdef __x86_64__
    Log(millisec, (void*)gregs[REG_RSP], (void*)gregs[REG_RIP]);
#else
    Log(millisec, (void*)gregs[REG_ESP], (void*)gregs[REG_EIP]);
#endif

    if (!rtcHz)
        startSignalCounter(timerMiliSec);
}

NS_EXPORT_(void) setupProfilingStuff(void)
{
    static int gFirstTime = 1;
    if(gFirstTime && !(gFirstTime=0)) {
	int  startTimer = 1;
	int  doNotStart = 1;
	int  firstDelay = 0;
        int  append = O_TRUNC;
        char *tst  = getenv("JPROF_FLAGS");

	/* Options from JPROF_FLAGS environment variable:
	 *   JP_DEFER  -> Wait for a SIGPROF (or SIGALRM, if JP_REALTIME
	 *               is set) from userland before starting
	 *               to generate them internally
	 *   JP_START  -> Install the signal handler
	 *   JP_PERIOD -> Time between profiler ticks
	 *   JP_FIRST  -> Extra delay before starting
	 *   JP_REALTIME -> Take stack traces in intervals of real time
	 *               rather than time used by the process (and the
	 *               system for the process).  This is useful for
	 *               finding time spent by the X server.
         *   JP_APPEND -> Append to jprof-log rather than overwriting it.
         *               This is somewhat risky since it depends on the
         *               address map staying constant across multiple runs.
	*/
	if(tst) {
	    if(strstr(tst, "JP_DEFER"))
	    {
		doNotStart = 0;
		startTimer = 0;
	    }
	    if(strstr(tst, "JP_START")) doNotStart = 0;
	    if(strstr(tst, "JP_REALTIME")) realTime = 1;
	    if(strstr(tst, "JP_APPEND")) append = O_APPEND;

	    char *delay = strstr(tst,"JP_PERIOD=");
	    if(delay) {
	        double tmp = strtod(delay+10, NULL);
		if(tmp>1e-3) {
		    timerMiliSec = static_cast<unsigned long>(1000 * tmp);
		}
	    }

	    char *first = strstr(tst, "JP_FIRST=");
	    if(first) {
	        firstDelay = atol(first+9);
	    }

            char *rtc = strstr(tst, "JP_RTC_HZ=");
            if (rtc) {
#if defined(linux)
                rtcHz = atol(rtc+10);
                timerMiliSec = 0; /* This makes JP_FIRST work right. */
                realTime = 1; /* It's the _R_TC and all.  ;) */

#define IS_POWER_OF_TWO(x) (((x) & ((x) - 1)) == 0)

                if (!IS_POWER_OF_TWO(rtcHz) || rtcHz < 2) {
                    fprintf(stderr, "JP_RTC_HZ must be power of two and >= 2, "
                            "but %d was provided; using default of 2048\n",
                            rtcHz);
                    rtcHz = 2048;
                }
#else
                fputs("JP_RTC_HZ found, but RTC profiling only supported on "
                      "Linux!\n", stderr);
                  
#endif
            }
	}

	if(!doNotStart) {

	    if(gLogFD<0) {
		gLogFD = open(M_LOGFILE, O_CREAT | O_WRONLY | append, 0666);
		if(gLogFD<0) {
		    fprintf(stderr, "Unable to create " M_LOGFILE);
		    perror(":");
		} else {
		    struct sigaction action;
		    sigset_t mset;

		    // Dump out the address map when we terminate
		    atexit(DumpAddressMap);

		    main_thread = pthread_self();

		    sigemptyset(&mset);
		    action.sa_handler = NULL;
		    action.sa_sigaction = StackHook;
		    action.sa_mask  = mset;
		    action.sa_flags = SA_RESTART | SA_SIGINFO;
#if defined(linux)
                    if (rtcHz) {
                        if (!setupRTCSignals(rtcHz, &action)) {
                            fputs("jprof: Error initializing RTC, NOT "
                                  "profiling\n", stderr);
                            return;
                        }
                    }

                    if (!rtcHz || firstDelay != 0)
#endif
                    if (realTime) {
                        sigaction(SIGALRM, &action, NULL);
                    } else {
                        sigaction(SIGPROF, &action, NULL);
                    }

		    // make it so a SIGUSR1 will stop the profiling
		    // Note:  It currently does not close the logfile.
		    // This could be configurable (so that it could
		    // later be reopened).

		    struct sigaction stop_action;
		    stop_action.sa_handler = EndProfilingHook;
		    stop_action.sa_mask  = mset;
		    stop_action.sa_flags = SA_RESTART;
		    sigaction(SIGUSR1, &stop_action, NULL);

                    printf("Jprof: Initialized signal handler and set "
                           "timer for %lu %s, %d s "
                           "initial delay\n",
                           rtcHz ? rtcHz : timerMiliSec, 
                           rtcHz ? "Hz" : "ms",
                           firstDelay);

		    if(startTimer) {
#if defined(linux)
                        /* If we have an initial delay we can just use
                           startSignalCounter to set up a timer to fire the
                           first stackHook after that delay.  When that happens
                           we'll go and switch to RTC profiling. */
                        if (rtcHz && firstDelay == 0) {
                            puts("Jprof: enabled RTC signals");
                            enableRTCSignals(true);
                        } else
#endif
                        {
                            puts("Jprof: started timer");
                            startSignalCounter(firstDelay*1000 + timerMiliSec);
                        }
		    }
		}
	    }
	}
    } else {
        printf("setupProfilingStuff() called multiple times\n");
    }
}