--- a/nsprpub/TAG-INFO
+++ b/nsprpub/TAG-INFO
@@ -1,1 +1,1 @@
-NSPR_4_9_1_BETA1
+NSPR_4_9_1_BETA2

--- a/nsprpub/config/Makefile.in
+++ b/nsprpub/config/Makefile.in
@@ -15,17 +15,17 @@ include $(MOD_DEPTH)/config/autoconf.mk
 INTERNAL_TOOLS	= 1
 
 # For sanity's sake, we compile nsinstall without the wrapped system
 # headers, so that we can use it to set up the wrapped system headers.
 VISIBILITY_FLAGS =
 
 # autoconf.mk must be deleted last (from the top-level directory)
 # because it is included by every makefile.
-DIST_GARBAGE	= nsprincl.mk nsprincl.sh nspr-config
+DIST_GARBAGE	= nsprincl.mk nsprincl.sh nspr-config nspr.pc
 
 RELEASE_BINS	= nspr-config
 
 include $(topsrcdir)/config/config.mk
 
 CSRCS	= now.c
 
 # This version hasn't been ported for us; the one in mozilla/config has
@@ -113,8 +113,12 @@ endif
 
 $(OBJDIR)/%$(PROG_SUFFIX): $(OBJDIR)/%.$(OBJ_SUFFIX)
 	@$(MAKE_OBJDIR)
 	$(CC) $(XCFLAGS) $< $(LDFLAGS) $(XLDOPTS) $(OUTOPTION)$@
 
 install:: nspr.m4
 	$(NSINSTALL) -D $(DESTDIR)$(datadir)/aclocal
 	$(NSINSTALL) -t -m 0644 $< $(DESTDIR)$(datadir)/aclocal
+
+install:: nspr.pc
+	$(NSINSTALL) -D $(DESTDIR)$(libdir)/pkgconfig
+	$(NSINSTALL) -t -m 0644 $< $(DESTDIR)$(libdir)/pkgconfig

--- a/nsprpub/config/prdepend.h
+++ b/nsprpub/config/prdepend.h
@@ -5,8 +5,9 @@
 
 /*
  * A dummy header file that is a dependency for all the object files.
  * Used to force a full recompilation of NSPR in Mozilla's Tinderbox
  * depend builds.  See comments in rules.mk.
  */
 
 #error "Do not include this header file."
+

--- a/nsprpub/configure
+++ b/nsprpub/configure
@@ -11,23 +11,23 @@
 ac_help=
 ac_default_prefix=/usr/local
 # Any additions from configure.in:
 ac_help="$ac_help
   --with-android-ndk=DIR
                           location where the Android NDK can be found"
 ac_help="$ac_help
   --with-android-toolchain=DIR
-                          location of the Android toolchain, default NDK/build/prebuilt/HOST/arm-eabi-4.4.0"
+                          location of the Android toolchain"
 ac_help="$ac_help
   --with-android-version=VER
                           Android platform version, default 5"
 ac_help="$ac_help
   --with-android-platform=DIR
-                          location of platform dir, default NDK/build/platforms/android-5/arch-arm"
+                          location of platform dir"
 ac_help="$ac_help
   --with-gonk=DIR         location of gonk dir"
 ac_help="$ac_help
   --with-dist-prefix=DIST_PREFIX
                           place build files in DIST_PREFIX [dist]"
 ac_help="$ac_help
   --with-dist-bindir=DIR  build execuatables in DIR [DIST_PREFIX/bin]"
 ac_help="$ac_help
@@ -872,22 +872,22 @@ if test "${with_android_platform+set}" =
   android_platform=$withval
 fi
 
 
 case "$target" in
 arm-linux*-android*|*-linuxandroid*)
     android_tool_prefix="arm-linux-androideabi"
     ;;
-arm-android-eabi)
-    android_tool_prefix="arm-eabi"
-    ;;
 i?86-*android*)
     android_tool_prefix="i686-android-linux"
     ;;
+mipsel-*android*)
+    android_tool_prefix="mipsel-linux-android"
+    ;;
 *)
     android_tool_prefix="$target_os"
     ;;
 esac
 
 
 # Check whether --with-gonk or --without-gonk was given.
 if test "${with_gonk+set}" = set; then
@@ -923,40 +923,53 @@ case "$target" in
     fi
 
     if test -z "$android_toolchain" ; then
         echo $ac_n "checking for android toolchain directory""... $ac_c" 1>&6
 echo "configure:928: checking for android toolchain directory" >&5
 
         kernel_name=`uname -s | tr "[:upper:]" "[:lower:]"`
 
-        android_toolchain="$android_ndk"/build/prebuilt/$kernel_name-x86/arm-eabi-4.4.0
-
-        # With newer NDK, the toolchain path has changed.
-        if ! test -d "$android_toolchain" ; then
-            android_toolchain="$android_ndk"/toolchains/arm-$kernel_name-androideabi-4.4.3/prebuilt/$kernel_name-x86
-        fi
+        case "$target_cpu" in
+        arm)
+            target_name=arm-linux-androideabi-4.4.3
+            ;;
+        i?86)
+            target_name=x86-4.4.3
+            ;;
+        mipsel)
+            target_name=mipsel-linux-android-4.4.3
+            ;;
+        esac
+        android_toolchain="$android_ndk"/toolchains/$target_name/prebuilt/$kernel_name-x86
 
         if test -d "$android_toolchain" ; then
             echo "$ac_t""$android_toolchain" 1>&6
         else
             { echo "configure: error: not found. You have to specify --with-android-toolchain=/path/to/ndk/toolchain." 1>&2; exit 1; }
         fi
     fi
 
     if test -z "$android_platform" ; then
         echo $ac_n "checking for android platform directory""... $ac_c" 1>&6
-echo "configure:948: checking for android platform directory" >&5
-
-        android_platform="$android_ndk"/build/platforms/android-"$android_version"/arch-"$target_cpu"
-
-        # With newer NDK, the platform path has changed.
-        if ! test -d "$android_platform" ; then
-            android_platform="$android_ndk"/platforms/android-"$android_version"/arch-"$target_cpu"
-        fi
+echo "configure:954: checking for android platform directory" >&5
+
+        case "$target_cpu" in
+        arm)
+            target_name=arm
+            ;;
+        i?86)
+            target_name=x86
+            ;;
+        mipsel)
+            target_name=mips
+            ;;
+        esac
+
+        android_platform="$android_ndk"/platforms/android-"$android_version"/arch-"$target_name"
 
         if test -d "$android_platform" ; then
             echo "$ac_t""$android_platform" 1>&6
         else
             { echo "configure: error: not found. You have to specify --with-android-platform=/path/to/ndk/platform." 1>&2; exit 1; }
         fi
     fi
 
@@ -1286,17 +1299,17 @@ if test -z "$CXX"; then
 
     esac
 fi
 
 if test -z "$SKIP_PATH_CHECKS"; then
     # Extract the first word of "$WHOAMI whoami", so it can be a program name with args.
 set dummy $WHOAMI whoami; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1295: checking for $ac_word" >&5
+echo "configure:1308: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_WHOAMI'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$WHOAMI" in
   /*)
   ac_cv_path_WHOAMI="$WHOAMI" # Let the user override the test with a path.
   ;;
   ?:/*)			 
@@ -1358,23 +1371,23 @@ if test "$target" != "$host" -o -n "$CRO
     echo "cross compiling from $host to $target"
     cross_compiling=yes
 
     _SAVE_CC="$CC"
     _SAVE_CFLAGS="$CFLAGS"
     _SAVE_LDFLAGS="$LDFLAGS"
 
     echo $ac_n "checking for $host compiler""... $ac_c" 1>&6
-echo "configure:1367: checking for $host compiler" >&5
+echo "configure:1380: checking for $host compiler" >&5
     for ac_prog in $HOST_CC gcc cc /usr/ucb/cc
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1373: checking for $ac_word" >&5
+echo "configure:1386: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_HOST_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$HOST_CC"; then
   ac_cv_prog_HOST_CC="$HOST_CC" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -1410,26 +1423,26 @@ test -n "$HOST_CC" || HOST_CC=""""
         HOST_LDFLAGS="$LDFLAGS"
     fi
 
     CC="$HOST_CC"
     CFLAGS="$HOST_CFLAGS"
     LDFLAGS="$HOST_LDFLAGS"
 
     echo $ac_n "checking whether the $host compiler ($HOST_CC $HOST_CFLAGS $HOST_LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1419: checking whether the $host compiler ($HOST_CC $HOST_CFLAGS $HOST_LDFLAGS) works" >&5
+echo "configure:1432: checking whether the $host compiler ($HOST_CC $HOST_CFLAGS $HOST_LDFLAGS) works" >&5
     cat > conftest.$ac_ext <<EOF
-#line 1421 "configure"
+#line 1434 "configure"
 #include "confdefs.h"
 
 int main() {
 return(0);
 ; return 0; }
 EOF
-if { (eval echo configure:1428: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1441: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_prog_host_cc_works=1 echo "$ac_t""yes" 1>&6
 else
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
   rm -rf conftest*
   { echo "configure: error: installation or configuration problem: $host compiler $HOST_CC cannot create executables." 1>&2; exit 1; } 
 fi
@@ -1454,17 +1467,17 @@ rm -f conftest*
         ;;
     esac
 
     for ac_prog in $CC "${target_alias}-gcc" "${target}-gcc"
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1463: checking for $ac_word" >&5
+echo "configure:1476: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -1488,17 +1501,17 @@ fi
 test -n "$CC" && break
 done
 test -n "$CC" || CC="echo"
 
     unset ac_cv_prog_CC
     # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1497: checking for $ac_word" >&5
+echo "configure:1510: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -1518,17 +1531,17 @@ if test -n "$CC"; then
 else
   echo "$ac_t""no" 1>&6
 fi
 
 if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1527: checking for $ac_word" >&5
+echo "configure:1540: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_prog_rejected=no
@@ -1569,17 +1582,17 @@ else
 fi
 
   if test -z "$CC"; then
     case "`uname -s`" in
     *win32* | *WIN32*)
       # Extract the first word of "cl", so it can be a program name with args.
 set dummy cl; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1578: checking for $ac_word" >&5
+echo "configure:1591: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -1601,33 +1614,33 @@ else
 fi
  ;;
     esac
   fi
   test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1610: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1623: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
 ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
 cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 1621 "configure"
+#line 1634 "configure"
 #include "confdefs.h"
 
 main(){return(0);}
 EOF
-if { (eval echo configure:1626: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1639: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
     ac_cv_prog_cc_cross=no
   else
     ac_cv_prog_cc_cross=yes
   fi
 else
@@ -1643,31 +1656,31 @@ ac_compile='${CC-cc} -c $CFLAGS $CPPFLAG
 ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
 if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1652: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1665: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1657: checking whether we are using GNU C" >&5
+echo "configure:1670: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.c <<EOF
 #ifdef __GNUC__
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1666: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1679: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
 fi
 fi
 
 echo "$ac_t""$ac_cv_prog_gcc" 1>&6
 
@@ -1676,17 +1689,17 @@ if test $ac_cv_prog_gcc = yes; then
 else
   GCC=
 fi
 
 ac_test_CFLAGS="${CFLAGS+set}"
 ac_save_CFLAGS="$CFLAGS"
 CFLAGS=
 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1685: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1698: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   echo 'void f(){}' > conftest.c
 if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
   ac_cv_prog_cc_g=yes
 else
   ac_cv_prog_cc_g=no
@@ -1713,17 +1726,17 @@ else
 fi
 
     if test -n "$USE_CPLUS"; then
         for ac_prog in $CXX "${target_alias}-g++" "${target}-g++"
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1722: checking for $ac_word" >&5
+echo "configure:1735: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CXX"; then
   ac_cv_prog_CXX="$CXX" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -1749,17 +1762,17 @@ done
 test -n "$CXX" || CXX="echo"
 
         unset ac_cv_prog_CXX
         for ac_prog in $CCC c++ g++ gcc CC cxx cc++ cl
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1758: checking for $ac_word" >&5
+echo "configure:1771: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CXX"; then
   ac_cv_prog_CXX="$CXX" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -1781,33 +1794,33 @@ else
 fi
 
 test -n "$CXX" && break
 done
 test -n "$CXX" || CXX="gcc"
 
 
 echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1790: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
+echo "configure:1803: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
 
 ac_ext=C
 # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
 ac_cpp='$CXXCPP $CPPFLAGS'
 ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
 ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
 cross_compiling=$ac_cv_prog_cxx_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 1801 "configure"
+#line 1814 "configure"
 #include "confdefs.h"
 
 int main(){return(0);}
 EOF
-if { (eval echo configure:1806: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1819: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cxx_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
     ac_cv_prog_cxx_cross=no
   else
     ac_cv_prog_cxx_cross=yes
   fi
 else
@@ -1823,31 +1836,31 @@ ac_compile='${CC-cc} -c $CFLAGS $CPPFLAG
 ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo "$ac_t""$ac_cv_prog_cxx_works" 1>&6
 if test $ac_cv_prog_cxx_works = no; then
   { echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1832: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1845: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6
 cross_compiling=$ac_cv_prog_cxx_cross
 
 echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6
-echo "configure:1837: checking whether we are using GNU C++" >&5
+echo "configure:1850: checking whether we are using GNU C++" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.C <<EOF
 #ifdef __GNUC__
   yes;
 #endif
 EOF
-if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1846: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1859: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gxx=yes
 else
   ac_cv_prog_gxx=no
 fi
 fi
 
 echo "$ac_t""$ac_cv_prog_gxx" 1>&6
 
@@ -1856,17 +1869,17 @@ if test $ac_cv_prog_gxx = yes; then
 else
   GXX=
 fi
 
 ac_test_CXXFLAGS="${CXXFLAGS+set}"
 ac_save_CXXFLAGS="$CXXFLAGS"
 CXXFLAGS=
 echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
-echo "configure:1865: checking whether ${CXX-g++} accepts -g" >&5
+echo "configure:1878: checking whether ${CXX-g++} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   echo 'void f(){}' > conftest.cc
 if test -z "`${CXX-g++} -g -c conftest.cc 2>&1`"; then
   ac_cv_prog_cxx_g=yes
 else
   ac_cv_prog_cxx_g=no
@@ -1901,17 +1914,17 @@ fi
         ;;
     esac
 
     for ac_prog in $RANLIB "${target_alias}-ranlib" "${target}-ranlib"
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1910: checking for $ac_word" >&5
+echo "configure:1923: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$RANLIB"; then
   ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -1936,17 +1949,17 @@ test -n "$RANLIB" && break
 done
 test -n "$RANLIB" || RANLIB="echo"
 
     for ac_prog in $AR "${target_alias}-ar" "${target}-ar"
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1945: checking for $ac_word" >&5
+echo "configure:1958: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$AR"; then
   ac_cv_prog_AR="$AR" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -1971,17 +1984,17 @@ test -n "$AR" && break
 done
 test -n "$AR" || AR="echo"
 
     for ac_prog in $AS "${target_alias}-as" "${target}-as"
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1980: checking for $ac_word" >&5
+echo "configure:1993: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$AS"; then
   ac_cv_prog_AS="$AS" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -2006,17 +2019,17 @@ test -n "$AS" && break
 done
 test -n "$AS" || AS="echo"
 
     for ac_prog in $LD "${target_alias}-ld" "${target}-ld"
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2015: checking for $ac_word" >&5
+echo "configure:2028: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$LD"; then
   ac_cv_prog_LD="$LD" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -2041,17 +2054,17 @@ test -n "$LD" && break
 done
 test -n "$LD" || LD="echo"
 
     for ac_prog in $STRIP "${target_alias}-strip" "${target}-strip"
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2050: checking for $ac_word" >&5
+echo "configure:2063: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$STRIP"; then
   ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -2076,17 +2089,17 @@ test -n "$STRIP" && break
 done
 test -n "$STRIP" || STRIP="echo"
 
     for ac_prog in $WINDRES "${target_alias}-windres" "${target}-windres"
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2085: checking for $ac_word" >&5
+echo "configure:2098: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$WINDRES"; then
   ac_cv_prog_WINDRES="$WINDRES" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -2111,17 +2124,17 @@ test -n "$WINDRES" && break
 done
 test -n "$WINDRES" || WINDRES="echo"
 
 
 else
     # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2120: checking for $ac_word" >&5
+echo "configure:2133: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -2141,17 +2154,17 @@ if test -n "$CC"; then
 else
   echo "$ac_t""no" 1>&6
 fi
 
 if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2150: checking for $ac_word" >&5
+echo "configure:2163: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_prog_rejected=no
@@ -2192,17 +2205,17 @@ else
 fi
 
   if test -z "$CC"; then
     case "`uname -s`" in
     *win32* | *WIN32*)
       # Extract the first word of "cl", so it can be a program name with args.
 set dummy cl; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2201: checking for $ac_word" >&5
+echo "configure:2214: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -2224,33 +2237,33 @@ else
 fi
  ;;
     esac
   fi
   test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:2233: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:2246: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
 ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
 cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 2244 "configure"
+#line 2257 "configure"
 #include "confdefs.h"
 
 main(){return(0);}
 EOF
-if { (eval echo configure:2249: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2262: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
     ac_cv_prog_cc_cross=no
   else
     ac_cv_prog_cc_cross=yes
   fi
 else
@@ -2266,31 +2279,31 @@ ac_compile='${CC-cc} -c $CFLAGS $CPPFLAG
 ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
 if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2275: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:2288: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:2280: checking whether we are using GNU C" >&5
+echo "configure:2293: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.c <<EOF
 #ifdef __GNUC__
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2289: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2302: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
 fi
 fi
 
 echo "$ac_t""$ac_cv_prog_gcc" 1>&6
 
@@ -2299,17 +2312,17 @@ if test $ac_cv_prog_gcc = yes; then
 else
   GCC=
 fi
 
 ac_test_CFLAGS="${CFLAGS+set}"
 ac_save_CFLAGS="$CFLAGS"
 CFLAGS=
 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2308: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:2321: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   echo 'void f(){}' > conftest.c
 if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
   ac_cv_prog_cc_g=yes
 else
   ac_cv_prog_cc_g=no
@@ -2339,17 +2352,17 @@ fi
         if test "$CC" = "cl" -a -z "$CXX"; then
             CXX=$CC
         else        
             for ac_prog in $CCC c++ g++ gcc CC cxx cc++ cl
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2348: checking for $ac_word" >&5
+echo "configure:2361: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CXX"; then
   ac_cv_prog_CXX="$CXX" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -2371,33 +2384,33 @@ else
 fi
 
 test -n "$CXX" && break
 done
 test -n "$CXX" || CXX="gcc"
 
 
 echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:2380: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
+echo "configure:2393: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
 
 ac_ext=C
 # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
 ac_cpp='$CXXCPP $CPPFLAGS'
 ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
 ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
 cross_compiling=$ac_cv_prog_cxx_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 2391 "configure"
+#line 2404 "configure"
 #include "confdefs.h"
 
 int main(){return(0);}
 EOF
-if { (eval echo configure:2396: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2409: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cxx_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
     ac_cv_prog_cxx_cross=no
   else
     ac_cv_prog_cxx_cross=yes
   fi
 else
@@ -2413,31 +2426,31 @@ ac_compile='${CC-cc} -c $CFLAGS $CPPFLAG
 ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo "$ac_t""$ac_cv_prog_cxx_works" 1>&6
 if test $ac_cv_prog_cxx_works = no; then
   { echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2422: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:2435: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6
 cross_compiling=$ac_cv_prog_cxx_cross
 
 echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6
-echo "configure:2427: checking whether we are using GNU C++" >&5
+echo "configure:2440: checking whether we are using GNU C++" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.C <<EOF
 #ifdef __GNUC__
   yes;
 #endif
 EOF
-if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:2436: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:2449: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gxx=yes
 else
   ac_cv_prog_gxx=no
 fi
 fi
 
 echo "$ac_t""$ac_cv_prog_gxx" 1>&6
 
@@ -2446,17 +2459,17 @@ if test $ac_cv_prog_gxx = yes; then
 else
   GXX=
 fi
 
 ac_test_CXXFLAGS="${CXXFLAGS+set}"
 ac_save_CXXFLAGS="$CXXFLAGS"
 CXXFLAGS=
 echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
-echo "configure:2455: checking whether ${CXX-g++} accepts -g" >&5
+echo "configure:2468: checking whether ${CXX-g++} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   echo 'void f(){}' > conftest.cc
 if test -z "`${CXX-g++} -g -c conftest.cc 2>&1`"; then
   ac_cv_prog_cxx_g=yes
 else
   ac_cv_prog_cxx_g=no
@@ -2480,72 +2493,72 @@ else
   else
     CXXFLAGS=
   fi
 fi
 
         fi
     fi
     echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:2489: checking how to run the C preprocessor" >&5
+echo "configure:2502: checking how to run the C preprocessor" >&5
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
 fi
 if test -z "$CPP"; then
 if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
     # This must be in double quotes, not single quotes, because CPP may get
   # substituted into the Makefile and "${CC-cc}" will confuse make.
   CPP="${CC-cc} -E"
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp.
   cat > conftest.$ac_ext <<EOF
-#line 2504 "configure"
+#line 2517 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2510: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2523: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
 else
   echo "$ac_err" >&5
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
   rm -rf conftest*
   CPP="${CC-cc} -E -traditional-cpp"
   cat > conftest.$ac_ext <<EOF
-#line 2521 "configure"
+#line 2534 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2527: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2540: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
 else
   echo "$ac_err" >&5
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
   rm -rf conftest*
   CPP="${CC-cc} -nologo -E"
   cat > conftest.$ac_ext <<EOF
-#line 2538 "configure"
+#line 2551 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2544: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2557: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
 else
   echo "$ac_err" >&5
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
   rm -rf conftest*
@@ -2562,17 +2575,17 @@ fi
 else
   ac_cv_prog_CPP="$CPP"
 fi
 echo "$ac_t""$CPP" 1>&6
 
     # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2571: checking for $ac_word" >&5
+echo "configure:2584: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$RANLIB"; then
   ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
@@ -2594,17 +2607,17 @@ else
   echo "$ac_t""no" 1>&6
 fi
 
     for ac_prog in as
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2603: checking for $ac_word" >&5
+echo "configure:2616: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$AS" in
   /*)
   ac_cv_path_AS="$AS" # Let the user override the test with a path.
   ;;
   ?:/*)			 
@@ -2635,17 +2648,17 @@ test -n "$AS" && break
 done
 test -n "$AS" || AS="$CC"
 
     for ac_prog in ar
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2644: checking for $ac_word" >&5
+echo "configure:2657: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$AR" in
   /*)
   ac_cv_path_AR="$AR" # Let the user override the test with a path.
   ;;
   ?:/*)			 
@@ -2676,17 +2689,17 @@ test -n "$AR" && break
 done
 test -n "$AR" || AR="echo not_ar"
 
     for ac_prog in ld link
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2685: checking for $ac_word" >&5
+echo "configure:2698: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$LD" in
   /*)
   ac_cv_path_LD="$LD" # Let the user override the test with a path.
   ;;
   ?:/*)			 
@@ -2717,17 +2730,17 @@ test -n "$LD" && break
 done
 test -n "$LD" || LD="echo not_ld"
 
     for ac_prog in strip
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2726: checking for $ac_word" >&5
+echo "configure:2739: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_STRIP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$STRIP" in
   /*)
   ac_cv_path_STRIP="$STRIP" # Let the user override the test with a path.
   ;;
   ?:/*)			 
@@ -2758,17 +2771,17 @@ test -n "$STRIP" && break
 done
 test -n "$STRIP" || STRIP="echo not_strip"
 
     for ac_prog in windres
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2767: checking for $ac_word" >&5
+echo "configure:2780: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$WINDRES" in
   /*)
   ac_cv_path_WINDRES="$WINDRES" # Let the user override the test with a path.
   ;;
   ?:/*)			 
@@ -2826,39 +2839,39 @@ esac
 
 if test "$cross_compiling"  = "yes"; then
     CROSS_COMPILE=1
 else
     CROSS_COMPILE=
 fi
 
 echo $ac_n "checking for gcc -pipe support""... $ac_c" 1>&6
-echo "configure:2835: checking for gcc -pipe support" >&5
+echo "configure:2848: checking for gcc -pipe support" >&5
 if test -n "$GNU_CC" && test -n "$GNU_CXX" && test -n "$GNU_AS"; then
     echo '#include <stdio.h>' > dummy-hello.c
     echo 'int main() { printf("Hello World\n"); return 0; }' >> dummy-hello.c
     ${CC} -S dummy-hello.c -o dummy-hello.s 2>&5
     cat dummy-hello.s | ${AS} -o dummy-hello.S - 2>&5
     if test $? = 0; then
         _res_as_stdin="yes"
     else
         _res_as_stdin="no"
     fi
     if test "$_res_as_stdin" = "yes"; then
         _SAVE_CFLAGS=$CFLAGS
         CFLAGS="$CFLAGS -pipe"
         cat > conftest.$ac_ext <<EOF
-#line 2850 "configure"
+#line 2863 "configure"
 #include "confdefs.h"
  #include <stdio.h> 
 int main() {
 printf("Hello World\n");
 ; return 0; }
 EOF
-if { (eval echo configure:2857: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2870: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   _res_gcc_pipe="yes"
 else
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
   rm -rf conftest*
   _res_gcc_pipe="no" 
 fi
@@ -2878,26 +2891,26 @@ else
     echo "$ac_t""no" 1>&6
 fi
 
 
 _SAVE_CFLAGS="$CFLAGS"
 CFLAGS="$CFLAGS -fprofile-generate -fprofile-correction"
 
 echo $ac_n "checking whether C compiler supports -fprofile-generate""... $ac_c" 1>&6
-echo "configure:2887: checking whether C compiler supports -fprofile-generate" >&5
+echo "configure:2900: checking whether C compiler supports -fprofile-generate" >&5
 cat > conftest.$ac_ext <<EOF
-#line 2889 "configure"
+#line 2902 "configure"
 #include "confdefs.h"
 
 int main() {
 return 0;
 ; return 0; }
 EOF
-if { (eval echo configure:2896: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2909: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
    PROFILE_GEN_CFLAGS="-fprofile-generate"
                  result="yes" 
 else
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
   rm -rf conftest*
   result="no"
@@ -2910,17 +2923,17 @@ if test $result = "yes"; then
    PROFILE_USE_CFLAGS="-fprofile-use -fprofile-correction -Wcoverage-mismatch"
    PROFILE_USE_LDFLAGS="-fprofile-use"
 fi
 
 CFLAGS="$_SAVE_CFLAGS"
 
 if test "$GNU_CC"; then
     echo $ac_n "checking for visibility(hidden) attribute""... $ac_c" 1>&6
-echo "configure:2919: checking for visibility(hidden) attribute" >&5
+echo "configure:2932: checking for visibility(hidden) attribute" >&5
 if eval "test \"`echo '$''{'ac_cv_visibility_hidden'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.c <<EOF
         int foo __attribute__ ((visibility ("hidden"))) = 1;
 EOF
         ac_cv_visibility_hidden=no
         if ${CC-cc} -Werror -S conftest.c -o conftest.s >/dev/null 2>&1; then
@@ -2934,17 +2947,17 @@ fi
 
 echo "$ac_t""$ac_cv_visibility_hidden" 1>&6
     if test "$ac_cv_visibility_hidden" = "yes"; then
         cat >> confdefs.h <<\EOF
 #define HAVE_VISIBILITY_HIDDEN_ATTRIBUTE 1
 EOF
 
         echo $ac_n "checking for visibility pragma support""... $ac_c" 1>&6
-echo "configure:2943: checking for visibility pragma support" >&5
+echo "configure:2956: checking for visibility pragma support" >&5
 if eval "test \"`echo '$''{'ac_cv_visibility_pragma'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.c <<EOF
 #pragma GCC visibility push(hidden)
             int foo_hidden = 1;
 #pragma GCC visibility push(default)
             int foo_default = 1;
@@ -2987,17 +3000,17 @@ fi # GNU_CC
 fi # SKIP_COMPILER_CHECKS
 
 if test -z "$SKIP_PATH_CHECKS"; then
     for ac_prog in perl5 perl
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2996: checking for $ac_word" >&5
+echo "configure:3009: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_PERL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$PERL" in
   /*)
   ac_cv_path_PERL="$PERL" # Let the user override the test with a path.
   ;;
   ?:/*)			 
@@ -3309,24 +3322,24 @@ yes)
 no)
     MOZ_THUMB2=
     thumb_flag="-marm"
     ;;
 *)
     _SAVE_CFLAGS="$CFLAGS"
     CFLAGS="$arch_flag"
     cat > conftest.$ac_ext <<EOF
-#line 3318 "configure"
+#line 3331 "configure"
 #include "confdefs.h"
 
 int main() {
 return sizeof(__thumb2__);
 ; return 0; }
 EOF
-if { (eval echo configure:3325: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3338: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   MOZ_THUMB2=1
 else
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
   rm -rf conftest*
   MOZ_THUMB2=
 fi
@@ -3378,26 +3391,26 @@ no)
     ;;
 esac
 
 all_flags=`echo $arch_flag $thumb_flag $thumb_interwork_flag $fpu_flag $float_abi_flag $soft_float_flag`
 if test -n "$all_flags"; then
     _SAVE_CFLAGS="$CFLAGS"
     CFLAGS="$all_flags"
     echo $ac_n "checking whether the chosen combination of compiler flags ($all_flags) works""... $ac_c" 1>&6
-echo "configure:3387: checking whether the chosen combination of compiler flags ($all_flags) works" >&5
+echo "configure:3400: checking whether the chosen combination of compiler flags ($all_flags) works" >&5
     cat > conftest.$ac_ext <<EOF
-#line 3389 "configure"
+#line 3402 "configure"
 #include "confdefs.h"
 
 int main() {
 return 0;
 ; return 0; }
 EOF
-if { (eval echo configure:3396: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3409: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   echo "$ac_t""yes" 1>&6
 else
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
   rm -rf conftest*
   { echo "configure: error: no" 1>&2; exit 1; }
 fi
@@ -3444,27 +3457,27 @@ EOF
 
     cat >> confdefs.h <<\EOF
 #define SYSV 1
 EOF
 
     DSO_LDOPTS='-brtl -bnortllib -bM:SRE -bnoentry -bexpall -blibpath:/usr/lib:/lib'
     ac_safe=`echo "sys/atomic_op.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for sys/atomic_op.h""... $ac_c" 1>&6
-echo "configure:3453: checking for sys/atomic_op.h" >&5
+echo "configure:3466: checking for sys/atomic_op.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3458 "configure"
+#line 3471 "configure"
 #include "confdefs.h"
 #include <sys/atomic_op.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3463: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3476: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
   eval "ac_cv_header_$ac_safe=yes"
 else
   echo "$ac_err" >&5
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
@@ -3611,36 +3624,36 @@ EOF
     PR_MD_ARCH_DIR=beos
     RESOLVE_LINK_SYMBOLS=1
     case "${target_cpu}" in
     i*86)
         _OPTIMIZE_FLAGS=-O2
         _DEBUG_FLAGS='-gdwarf-2 -O0'
         MKSHLIB='$(CCC) $(DSO_LDOPTS) -o $@'
         echo $ac_n "checking for gethostbyaddr in -lbind""... $ac_c" 1>&6
-echo "configure:3620: checking for gethostbyaddr in -lbind" >&5
+echo "configure:3633: checking for gethostbyaddr in -lbind" >&5
 ac_lib_var=`echo bind'_'gethostbyaddr | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_save_LIBS="$LIBS"
 LIBS="-lbind  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 3628 "configure"
+#line 3641 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char gethostbyaddr();
 
 int main() {
 gethostbyaddr()
 ; return 0; }
 EOF
-if { (eval echo configure:3639: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3652: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=no"
 fi
@@ -3839,27 +3852,27 @@ EOF
             CPU_ARCH=ppc
             ;;
     esac
     if test "`echo $CC | grep -c '\-arch '`" = "0"; then
         CC="$CC -arch $CPU_ARCH"
     fi
     ac_safe=`echo "crt_externs.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for crt_externs.h""... $ac_c" 1>&6
-echo "configure:3848: checking for crt_externs.h" >&5
+echo "configure:3861: checking for crt_externs.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3853 "configure"
+#line 3866 "configure"
 #include "confdefs.h"
 #include <crt_externs.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3858: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3871: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
   eval "ac_cv_header_$ac_safe=yes"
 else
   echo "$ac_err" >&5
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
@@ -5030,27 +5043,27 @@ EOF
     if test -z "$GNU_CC"; then
         CC="$CC -std1 -ieee_with_inexact"
         if test "$OS_RELEASE" != "V2.0"; then
             CC="$CC -readonly_strings"
         fi
         _OPTIMIZE_FLAGS="$_OPTIMIZE_FLAGS -Olimit 4000"
         ac_safe=`echo "machine/builtins.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for machine/builtins.h""... $ac_c" 1>&6
-echo "configure:5039: checking for machine/builtins.h" >&5
+echo "configure:5052: checking for machine/builtins.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5044 "configure"
+#line 5057 "configure"
 #include "confdefs.h"
 #include <machine/builtins.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5049: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5062: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
   eval "ac_cv_header_$ac_safe=yes"
 else
   echo "$ac_err" >&5
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
@@ -5689,63 +5702,63 @@ if test -z "$SKIP_LIBRARY_CHECKS"; then
 
 
 
 case $target in
 *-darwin*|*-beos*|*-os2*)
     ;;
 *)
     echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
-echo "configure:5698: checking for dlopen in -ldl" >&5
+echo "configure:5711: checking for dlopen in -ldl" >&5
 ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_save_LIBS="$LIBS"
 LIBS="-ldl  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 5706 "configure"
+#line 5719 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char dlopen();
 
 int main() {
 dlopen()
 ; return 0; }
 EOF
-if { (eval echo configure:5717: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5730: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=no"
 fi
 rm -f conftest*
 LIBS="$ac_save_LIBS"
 
 fi
 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
   echo "$ac_t""yes" 1>&6
   ac_safe=`echo "dlfcn.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for dlfcn.h""... $ac_c" 1>&6
-echo "configure:5734: checking for dlfcn.h" >&5
+echo "configure:5747: checking for dlfcn.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5739 "configure"
+#line 5752 "configure"
 #include "confdefs.h"
 #include <dlfcn.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5744: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5757: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
   eval "ac_cv_header_$ac_safe=yes"
 else
   echo "$ac_err" >&5
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
@@ -5768,23 +5781,23 @@ fi
     ;;
 esac
 
 
 
 
 if test $ac_cv_prog_gcc = yes; then
     echo $ac_n "checking whether ${CC-cc} needs -traditional""... $ac_c" 1>&6
-echo "configure:5777: checking whether ${CC-cc} needs -traditional" >&5
+echo "configure:5790: checking whether ${CC-cc} needs -traditional" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc_traditional'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
     ac_pattern="Autoconf.*'x'"
   cat > conftest.$ac_ext <<EOF
-#line 5783 "configure"
+#line 5796 "configure"
 #include "confdefs.h"
 #include <sgtty.h>
 Autoconf TIOCGETP
 EOF
 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
   egrep "$ac_pattern" >/dev/null 2>&1; then
   rm -rf conftest*
   ac_cv_prog_gcc_traditional=yes
@@ -5792,17 +5805,17 @@ else
   rm -rf conftest*
   ac_cv_prog_gcc_traditional=no
 fi
 rm -f conftest*
 
 
   if test $ac_cv_prog_gcc_traditional = no; then
     cat > conftest.$ac_ext <<EOF
-#line 5801 "configure"
+#line 5814 "configure"
 #include "confdefs.h"
 #include <termio.h>
 Autoconf TCGETA
 EOF
 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
   egrep "$ac_pattern" >/dev/null 2>&1; then
   rm -rf conftest*
   ac_cv_prog_gcc_traditional=yes
@@ -5818,22 +5831,22 @@ echo "$ac_t""$ac_cv_prog_gcc_traditional
   fi
 fi
 
 _SAVE_LIBS="$LIBS"
 LIBS="$LIBS $OS_LIBS"
 for ac_func in lchown strerror dladdr
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5827: checking for $ac_func" >&5
+echo "configure:5840: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5832 "configure"
+#line 5845 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
 #include <assert.h>
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char $ac_func();
@@ -5846,17 +5859,17 @@ int main() {
 #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
 choke me
 #else
 $ac_func();
 #endif
 
 ; return 0; }
 EOF
-if { (eval echo configure:5855: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5868: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
   echo "configure: failed program was:" >&5
   cat conftest.$ac_ext >&5
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=no"
 fi
@@ -5898,17 +5911,17 @@ if test "$CCACHE" != "no"; then
             fi
         fi
     fi
     for ac_prog in $CCACHE ccache
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5907: checking for $ac_word" >&5
+echo "configure:5920: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_CCACHE'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$CCACHE" in
   /*)
   ac_cv_path_CCACHE="$CCACHE" # Let the user override the test with a path.
   ;;
   ?:/*)			 
@@ -5957,17 +5970,17 @@ if test "${enable_strip+set}" = set; the
 fi
 
 
 case "${target_os}" in
 hpux*)
 if test -z "$GNU_CC"; then
 
     echo $ac_n "checking for +Olit support""... $ac_c" 1>&6
-echo "configure:5966: checking for +Olit support" >&5
+echo "configure:5979: checking for +Olit support" >&5
 if eval "test \"`echo '$''{'ac_cv_hpux_usable_olit_option'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
                   ac_cv_hpux_usable_olit_option=no
         rm -f conftest*
         echo 'int main() { return 0; }' | cat > conftest.c
         ${CC-cc} ${CFLAGS} +Olit=all -o conftest conftest.c > conftest.out 2>&1
         if test $? -eq 0; then
@@ -5999,17 +6012,17 @@ darwin*)
     _HAVE_PTHREADS=1
     ;;
 wince*)
     _HAVE_PTHREADS=
     ;;
 *)
     
 echo $ac_n "checking for pthread_create in -lpthreads""... $ac_c" 1>&6
-echo "configure:6008: checking for pthread_create in -lpthreads" >&5
+echo "configure:6021: checking for pthread_create in -lpthreads" >&5
 echo "
     #include <pthread.h> 
     void *foo(void *v) { return v; } 
     int main() { 
         pthread_t t;
         if (!pthread_create(&t, 0, &foo, 0)) {
             pthread_join(t, 0);
         }
@@ -6021,17 +6034,17 @@ echo "
     rm -f dummy.c dummy${ac_exeext} ;
     if test "$_res" = "0"; then
         echo "$ac_t""yes" 1>&6
         _HAVE_PTHREADS=1 _PTHREAD_LDFLAGS="-lpthreads"
     else
         echo "$ac_t""no" 1>&6
         
 echo $ac_n "checking for pthread_create in -lpthread""... $ac_c" 1>&6
-echo "configure:6030: checking for pthread_create in -lpthread" >&5
+echo "configure:6043: checking for pthread_create in -lpthread" >&5
 echo "
     #include <pthread.h> 
     void *foo(void *v) { return v; } 
     int main() { 
         pthread_t t;
         if (!pthread_create(&t, 0, &foo, 0)) {
             pthread_join(t, 0);
         }
@@ -6043,17 +6056,17 @@ echo "
     rm -f dummy.c dummy${ac_exeext} ;
     if test "$_res" = "0"; then
         echo "$ac_t""yes" 1>&6
         _HAVE_PTHREADS=1 _PTHREAD_LDFLAGS="-lpthread"
     else
         echo "$ac_t""no" 1>&6
         
 echo $ac_n "checking for pthread_create in -lc_r""... $ac_c" 1>&6
-echo "configure:6052: checking for pthread_create in -lc_r" >&5
+echo "configure:6065: checking for pthread_create in -lc_r" >&5
 echo "
     #include <pthread.h> 
     void *foo(void *v) { return v; } 
     int main() { 
         pthread_t t;
         if (!pthread_create(&t, 0, &foo, 0)) {
             pthread_join(t, 0);
         }
@@ -6065,17 +6078,17 @@ echo "
     rm -f dummy.c dummy${ac_exeext} ;
     if test "$_res" = "0"; then
         echo "$ac_t""yes" 1>&6
         _HAVE_PTHREADS=1 _PTHREAD_LDFLAGS="-lc_r"
     else
         echo "$ac_t""no" 1>&6
         
 echo $ac_n "checking for pthread_create in -lc""... $ac_c" 1>&6
-echo "configure:6074: checking for pthread_create in -lc" >&5
+echo "configure:6087: checking for pthread_create in -lc" >&5
 echo "
     #include <pthread.h> 
     void *foo(void *v) { return v; } 
     int main() { 
         pthread_t t;
         if (!pthread_create(&t, 0, &foo, 0)) {
             pthread_join(t, 0);
         }
@@ -6183,17 +6196,17 @@ if test "${enable_ipv6+set}" = set; then
       fi
 fi
 
 
 if test -n "$USE_PTHREADS"; then
       rm -f conftest*
    ac_cv_have_dash_pthread=no
    echo $ac_n "checking whether ${CC-cc} accepts -pthread""... $ac_c" 1>&6
-echo "configure:6192: checking whether ${CC-cc} accepts -pthread" >&5
+echo "configure:6205: checking whether ${CC-cc} accepts -pthread" >&5
    echo 'int main() { return 0; }' | cat > conftest.c
    ${CC-cc} -pthread -o conftest conftest.c > conftest.out 2>&1
    if test $? -eq 0; then
 	if test -z "`egrep -i '(unrecognize|unknown)' conftest.out | grep pthread`" && test -z "`egrep -i '(error|incorrect)' conftest.out`" ; then
 	    ac_cv_have_dash_pthread=yes
 		case "$target_os" in
 	    freebsd*)
 # Freebsd doesn't use -pthread for compiles, it uses them for linking
@@ -6206,17 +6219,17 @@ echo "configure:6192: checking whether $
 	fi
     fi
     rm -f conftest*
     echo "$ac_t""$ac_cv_have_dash_pthread" 1>&6
 
 			    ac_cv_have_dash_pthreads=no
     if test "$ac_cv_have_dash_pthread" = "no"; then
 	    echo $ac_n "checking whether ${CC-cc} accepts -pthreads""... $ac_c" 1>&6
-echo "configure:6215: checking whether ${CC-cc} accepts -pthreads" >&5
+echo "configure:6228: checking whether ${CC-cc} accepts -pthreads" >&5
     	echo 'int main() { return 0; }' | cat > conftest.c
 	    ${CC-cc} -pthreads -o conftest conftest.c > conftest.out 2>&1
     	if test $? -eq 0; then
 	    	if test -z "`egrep -i '(unrecognize|unknown)' conftest.out | grep pthreads`" && test -z "`egrep -i '(error|incorrect)' conftest.out`" ; then
 			    ac_cv_have_dash_pthreads=yes
 			    CFLAGS="$CFLAGS -pthreads"
 			    CXXFLAGS="$CXXFLAGS -pthreads"
 		    fi
@@ -6657,16 +6670,17 @@ fi
 
 MAKEFILES="
     Makefile
     config/Makefile
     config/autoconf.mk
     config/nsprincl.mk
     config/nsprincl.sh
     config/nspr-config
+    config/nspr.pc
     lib/Makefile
     lib/ds/Makefile
     lib/libc/Makefile
     lib/libc/include/Makefile
     lib/libc/src/Makefile
     lib/tests/Makefile
     pkg/Makefile
     pr/Makefile

--- a/nsprpub/configure.in
+++ b/nsprpub/configure.in
@@ -103,40 +103,40 @@ dnl ====================================
 
 AC_ARG_WITH(android-ndk,
 [  --with-android-ndk=DIR
                           location where the Android NDK can be found],
     android_ndk=$withval)
 
 AC_ARG_WITH(android-toolchain,
 [  --with-android-toolchain=DIR
-                          location of the Android toolchain, default NDK/build/prebuilt/HOST/arm-eabi-4.4.0],
+                          location of the Android toolchain],
     android_toolchain=$withval)
 
 AC_ARG_WITH(android-version,
 [  --with-android-version=VER
                           Android platform version, default 5],
     android_version=$withval,
     android_version=5)
 
 AC_ARG_WITH(android-platform,
 [  --with-android-platform=DIR
-                          location of platform dir, default NDK/build/platforms/android-5/arch-arm],
+                          location of platform dir],
     android_platform=$withval)
 
 case "$target" in
 arm-linux*-android*|*-linuxandroid*)
     android_tool_prefix="arm-linux-androideabi"
     ;;
-arm-android-eabi)
-    android_tool_prefix="arm-eabi"
-    ;;
 i?86-*android*)
     android_tool_prefix="i686-android-linux"
     ;;
+mipsel-*android*)
+    android_tool_prefix="mipsel-linux-android"
+    ;;
 *)
     android_tool_prefix="$target_os"
     ;;
 esac
 
 dnl ========================================================
 dnl = Gonk is a fork of Android used for Mozilla's B2G project.
 dnl = Configuration is done largely by the top level config
@@ -172,39 +172,52 @@ case "$target" in
        AC_MSG_ERROR([You must specify --with-android-ndk=/path/to/ndk when targeting Android.])
     fi
 
     if test -z "$android_toolchain" ; then
         AC_MSG_CHECKING([for android toolchain directory])
 
         kernel_name=`uname -s | tr "[[:upper:]]" "[[:lower:]]"`
 
-        android_toolchain="$android_ndk"/build/prebuilt/$kernel_name-x86/arm-eabi-4.4.0
-
-        # With newer NDK, the toolchain path has changed.
-        if ! test -d "$android_toolchain" ; then
-            android_toolchain="$android_ndk"/toolchains/arm-$kernel_name-androideabi-4.4.3/prebuilt/$kernel_name-x86
-        fi
+        case "$target_cpu" in
+        arm)
+            target_name=arm-linux-androideabi-4.4.3
+            ;;
+        i?86)
+            target_name=x86-4.4.3
+            ;;
+        mipsel)
+            target_name=mipsel-linux-android-4.4.3
+            ;;
+        esac
+        android_toolchain="$android_ndk"/toolchains/$target_name/prebuilt/$kernel_name-x86
 
         if test -d "$android_toolchain" ; then
             AC_MSG_RESULT([$android_toolchain])
         else
             AC_MSG_ERROR([not found. You have to specify --with-android-toolchain=/path/to/ndk/toolchain.])
         fi
     fi
 
     if test -z "$android_platform" ; then
         AC_MSG_CHECKING([for android platform directory])
 
-        android_platform="$android_ndk"/build/platforms/android-"$android_version"/arch-"$target_cpu"
+        case "$target_cpu" in
+        arm)
+            target_name=arm
+            ;;
+        i?86)
+            target_name=x86
+            ;;
+        mipsel)
+            target_name=mips
+            ;;
+        esac
 
-        # With newer NDK, the platform path has changed.
-        if ! test -d "$android_platform" ; then
-            android_platform="$android_ndk"/platforms/android-"$android_version"/arch-"$target_cpu"
-        fi
+        android_platform="$android_ndk"/platforms/android-"$android_version"/arch-"$target_name"
 
         if test -d "$android_platform" ; then
             AC_MSG_RESULT([$android_platform])
         else
             AC_MSG_ERROR([not found. You have to specify --with-android-platform=/path/to/ndk/platform.])
         fi
     fi
 
@@ -3294,16 +3307,17 @@ dnl Generate output files.
 dnl ========================================================
 MAKEFILES="
     Makefile
     config/Makefile
     config/autoconf.mk
     config/nsprincl.mk
     config/nsprincl.sh
     config/nspr-config
+    config/nspr.pc
     lib/Makefile
     lib/ds/Makefile
     lib/libc/Makefile
     lib/libc/include/Makefile
     lib/libc/src/Makefile
     lib/tests/Makefile
     pkg/Makefile
     pr/Makefile

--- a/nsprpub/pr/include/md/_linux.cfg
+++ b/nsprpub/pr/include/md/_linux.cfg
@@ -16,16 +16,18 @@
 #endif
 
 #if !defined(LINUX) && defined(__linux__)
 #define LINUX
 #endif
 
 #ifdef __FreeBSD_kernel__
 #define PR_AF_INET6 28  /* same as AF_INET6 */
+#elif defined(__GNU__)
+#define PR_AF_INET6 26  /* same as AF_INET6 */
 #else
 #define PR_AF_INET6 10  /* same as AF_INET6 */
 #endif
 
 #ifdef __powerpc64__
 
 #undef  IS_LITTLE_ENDIAN
 #define IS_BIG_ENDIAN    1

--- a/nsprpub/pr/include/md/_pth.h
+++ b/nsprpub/pr/include/md/_pth.h
@@ -113,20 +113,16 @@
 	(!memcmp(&(t), &pt_zero_tid, sizeof(pthread_t)))
 #define _PT_PTHREAD_COPY_THR_HANDLE(st, dt)   (dt) = (st)
 #elif defined(IRIX) || defined(OSF1) || defined(AIX) || defined(SOLARIS) \
 	|| defined(LINUX) || defined(__GNU__) || defined(__GLIBC__) \
 	|| defined(HPUX) || defined(FREEBSD) \
 	|| defined(NETBSD) || defined(OPENBSD) || defined(BSDI) \
 	|| defined(NTO) || defined(DARWIN) \
 	|| defined(UNIXWARE) || defined(RISCOS)	|| defined(SYMBIAN)
-#ifdef __GNU__
-/* Hurd pthreads don't have an invalid value for pthread_t. -- rmh */
-#error Using Hurd pthreads
-#endif
 #define _PT_PTHREAD_INVALIDATE_THR_HANDLE(t)  (t) = 0
 #define _PT_PTHREAD_THR_HANDLE_IS_INVALID(t)  (t) == 0
 #define _PT_PTHREAD_COPY_THR_HANDLE(st, dt)   (dt) = (st)
 #else 
 #error "pthreads is not supported for this architecture"
 #endif
 
 #if defined(_PR_DCETHREADS)

--- a/nsprpub/pr/src/md/unix/uxrng.c
+++ b/nsprpub/pr/src/md/unix/uxrng.c
@@ -89,17 +89,17 @@ GetHighResClock(void *buf, size_t maxbyt
 static size_t
 GetHighResClock(void *buf, size_t maxbytes)
 {
     return 0;
 }
 
 #elif (defined(LINUX) || defined(FREEBSD) || defined(__FreeBSD_kernel__) \
     || defined(NETBSD) || defined(__NetBSD_kernel__) || defined(OPENBSD) \
-    || defined(SYMBIAN))
+    || defined(SYMBIAN) || defined(__GNU__))
 #include <sys/types.h>
 #include <sys/stat.h>
 #include <fcntl.h>
 
 static int      fdDevURandom;
 static PRCallOnceType coOpenDevURandom;
 
 static PRStatus OpenDevURandom( void )