author L. David Baron <>
Thu, 18 Nov 2010 11:06:14 -0800
changeset 57856 b80c7aadda8311e73658e0b8d2a500eef511634b
parent 56902 b5086952fc37ce26581b82665cb69bb439870a74
child 58123 9c3babe383e147c4ec8e1fb11462fd0425d49c42
permissions -rw-r--r--
Add reftests for bug 500141. a2.0=tests+blocking

/* -*- Mode: C++; tab-width: 20; indent-tabs-mode: nil; c-basic-offset: 2 -*-
 * ***** BEGIN LICENSE BLOCK *****
 * Version: MPL 1.1/GPL 2.0/LGPL 2.1
 * The contents of this file are subject to the Mozilla Public License Version
 * 1.1 (the "License"); you may not use this file except in compliance with
 * the License. You may obtain a copy of the License at
 * Software distributed under the License is distributed on an "AS IS" basis,
 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
 * for the specific language governing rights and limitations under the
 * License.
 * The Original Code is Mozilla Corporation code.
 * The Initial Developer of the Original Code is Mozilla Foundation.
 * Portions created by the Initial Developer are Copyright (C) 2010
 * the Initial Developer. All Rights Reserved.
 * Contributor(s):
 *   Robert O'Callahan <>
 * Alternatively, the contents of this file may be used under the terms of
 * either the GNU General Public License Version 2 or later (the "GPL"), or
 * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
 * in which case the provisions of the GPL or the LGPL are applicable instead
 * of those above. If you wish to allow use of your version of this file only
 * under the terms of either the GPL or the LGPL, and not to allow others to
 * use your version of this file under the terms of the MPL, indicate your
 * decision by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL or the LGPL. If you do not delete
 * the provisions above, a recipient may use your version of this file under
 * the terms of any one of the MPL, the GPL or the LGPL.
 * ***** END LICENSE BLOCK ***** */

#include "ThebesLayerBuffer.h"
#include "Layers.h"
#include "gfxContext.h"
#include "gfxPlatform.h"
#include "gfxUtils.h"

namespace mozilla {
namespace layers {

static nsIntSize
ScaledSize(const nsIntSize& aSize, float aXScale, float aYScale)
  if (aXScale == 1.0 && aYScale == 1.0) {
    return aSize;

  gfxRect rect(0, 0, aSize.width, aSize.height);
  rect.Scale(aXScale, aYScale);
  return nsIntSize(rect.size.width, rect.size.height);

ThebesLayerBuffer::GetQuadrantRectangle(XSide aXSide, YSide aYSide)
  // quadrantTranslation is the amount we translate the top-left
  // of the quadrant by to get coordinates relative to the layer
  nsIntPoint quadrantTranslation = -mBufferRotation;
  quadrantTranslation.x += aXSide == LEFT ? mBufferRect.width : 0;
  quadrantTranslation.y += aYSide == TOP ? mBufferRect.height : 0;
  return mBufferRect + quadrantTranslation;

 * @param aXSide LEFT means we draw from the left side of the buffer (which
 * is drawn on the right side of mBufferRect). RIGHT means we draw from
 * the right side of the buffer (which is drawn on the left side of
 * mBufferRect).
 * @param aYSide TOP means we draw from the top side of the buffer (which
 * is drawn on the bottom side of mBufferRect). BOTTOM means we draw from
 * the bottom side of the buffer (which is drawn on the top side of
 * mBufferRect).
ThebesLayerBuffer::DrawBufferQuadrant(gfxContext* aTarget,
                                      XSide aXSide, YSide aYSide,
                                      float aOpacity,
                                      float aXRes, float aYRes)
  // The rectangle that we're going to fill. Basically we're going to
  // render the buffer at mBufferRect + quadrantTranslation to get the
  // pixels in the right place, but we're only going to paint within
  // mBufferRect
  nsIntRect quadrantRect = GetQuadrantRectangle(aXSide, aYSide);
  nsIntRect fillRect;
  if (!fillRect.IntersectRect(mBufferRect, quadrantRect))

  aTarget->Rectangle(gfxRect(fillRect.x, fillRect.y,
                             fillRect.width, fillRect.height),

  gfxPoint quadrantTranslation(quadrantRect.x, quadrantRect.y);
  nsRefPtr<gfxPattern> pattern = new gfxPattern(mBuffer);

  gfxPattern::GraphicsFilter filter = gfxPattern::FILTER_NEAREST;

  gfxContextMatrixAutoSaveRestore saveMatrix(aTarget);

  // Transform from user -> buffer space.
  gfxMatrix transform;
  transform.Scale(aXRes, aYRes);

  // in common cases the matrix after scaling by 1/aRes is close to 1.0,
  // so we want to make it 1.0 in both cases
  transform.Scale(1.0 / aXRes, 1.0 / aYRes);

  gfxMatrix ctxMatrix = aTarget->CurrentMatrix();
  ctxMatrix.Scale(1.0 / aXRes, 1.0 / aYRes);


  if (aOpacity != 1.0) {
  } else {

ThebesLayerBuffer::DrawBufferWithRotation(gfxContext* aTarget, float aOpacity,
                                          float aXRes, float aYRes)
  // Draw four quadrants. We could use REPEAT_, but it's probably better
  // not to, to be performance-safe.
  DrawBufferQuadrant(aTarget, LEFT, TOP, aOpacity, aXRes, aYRes);
  DrawBufferQuadrant(aTarget, RIGHT, TOP, aOpacity, aXRes, aYRes);
  DrawBufferQuadrant(aTarget, LEFT, BOTTOM, aOpacity, aXRes, aYRes);
  DrawBufferQuadrant(aTarget, RIGHT, BOTTOM, aOpacity, aXRes, aYRes);

ThebesLayerBuffer::GetContextForQuadrantUpdate(const nsIntRect& aBounds,
                                               float aXResolution,
                                               float aYResolution)
  nsRefPtr<gfxContext> ctx = new gfxContext(mBuffer);

  // Figure out which quadrant to draw in
  PRInt32 xBoundary = mBufferRect.XMost() - mBufferRotation.x;
  PRInt32 yBoundary = mBufferRect.YMost() - mBufferRotation.y;
  XSide sideX = aBounds.XMost() <= xBoundary ? RIGHT : LEFT;
  YSide sideY = aBounds.YMost() <= yBoundary ? BOTTOM : TOP;
  nsIntRect quadrantRect = GetQuadrantRectangle(sideX, sideY);
  NS_ASSERTION(quadrantRect.Contains(aBounds), "Messed up quadrants");
  ctx->Scale(aXResolution, aYResolution);
  ctx->Translate(-gfxPoint(quadrantRect.x, quadrantRect.y));

  return ctx.forget();

static void
WrapRotationAxis(PRInt32* aRotationPoint, PRInt32 aSize)
  if (*aRotationPoint < 0) {
    *aRotationPoint += aSize;
  } else if (*aRotationPoint >= aSize) {
    *aRotationPoint -= aSize;

ThebesLayerBuffer::BeginPaint(ThebesLayer* aLayer, ContentType aContentType,
                              float aXResolution, float aYResolution)
  PaintState result;

  result.mRegionToDraw.Sub(aLayer->GetVisibleRegion(), aLayer->GetValidRegion());

  float curXRes = aLayer->GetXResolution();
  float curYRes = aLayer->GetYResolution();
  if (mBuffer &&
      (aContentType != mBuffer->GetContentType() ||
       aXResolution != curXRes || aYResolution != curYRes)) {
    // We're effectively clearing the valid region, so we need to draw
    // the entire visible region now.
    // XXX/cjones: a possibly worthwhile optimization to keep in mind
    // is to re-use buffers when the resolution and visible region
    // have changed in such a way that the buffer size stays the same.
    // It might make even more sense to allocate buffers from a
    // recyclable pool, so that we could keep this logic simple and
    // still get back the same buffer.
    result.mRegionToDraw = aLayer->GetVisibleRegion();
    result.mRegionToInvalidate = aLayer->GetValidRegion();

  if (result.mRegionToDraw.IsEmpty())
    return result;
  nsIntRect drawBounds = result.mRegionToDraw.GetBounds();

  nsIntRect visibleBounds = aLayer->GetVisibleRegion().GetBounds();
  nsIntSize destBufferDims = ScaledSize(visibleBounds.Size(),
                                        aXResolution, aYResolution);
  nsRefPtr<gfxASurface> destBuffer;
  nsIntRect destBufferRect;
  PRBool bufferDimsChanged = PR_FALSE;

  if (BufferSizeOkFor(destBufferDims)) {
    NS_ASSERTION(curXRes == aXResolution && curYRes == aYResolution,
                 "resolution changes must Clear()!");

    // The current buffer is big enough to hold the visible area.
    if (mBufferRect.Contains(visibleBounds)) {
      // We don't need to adjust mBufferRect.
      destBufferRect = mBufferRect;
    } else {
      // The buffer's big enough but doesn't contain everything that's
      // going to be visible. We'll move it.
      destBufferRect = nsIntRect(visibleBounds.TopLeft(), mBufferRect.Size());
    nsIntRect keepArea;
    if (keepArea.IntersectRect(destBufferRect, mBufferRect)) {
      // Set mBufferRotation so that the pixels currently in mBuffer
      // will still be rendered in the right place when mBufferRect
      // changes to destBufferRect.
      nsIntPoint newRotation = mBufferRotation +
        (destBufferRect.TopLeft() - mBufferRect.TopLeft());
      WrapRotationAxis(&newRotation.x, mBufferRect.width);
      WrapRotationAxis(&newRotation.y, mBufferRect.height);
      NS_ASSERTION(nsIntRect(nsIntPoint(0,0), mBufferRect.Size()).Contains(newRotation),
                   "newRotation out of bounds");
      PRInt32 xBoundary = destBufferRect.XMost() - newRotation.x;
      PRInt32 yBoundary = destBufferRect.YMost() - newRotation.y;
      if ((drawBounds.x < xBoundary && xBoundary < drawBounds.XMost()) ||
          (drawBounds.y < yBoundary && yBoundary < drawBounds.YMost())) {
        // The stuff we need to redraw will wrap around an edge of the
        // buffer, so we will need to do a self-copy
        if (mBufferRotation == nsIntPoint(0,0)) {
          destBuffer = mBuffer;
        } else {
          // We can't do a real self-copy because the buffer is rotated.
          // So allocate a new buffer for the destination.
          destBufferRect = visibleBounds;
          destBufferDims = ScaledSize(destBufferRect.Size(),
                                      aXResolution, aYResolution);
          bufferDimsChanged = PR_TRUE;
          destBuffer = CreateBuffer(aContentType, destBufferDims);
          if (!destBuffer)
            return result;
      } else {
        mBufferRect = destBufferRect;
        mBufferRotation = newRotation;
    } else {
      // No pixels are going to be kept. The whole visible region
      // will be redrawn, so we don't need to copy anything, so we don't
      // set destBuffer.
      mBufferRect = destBufferRect;
      mBufferRotation = nsIntPoint(0,0);
  } else {
    // The buffer's not big enough, so allocate a new one
    destBufferRect = visibleBounds;
    destBufferDims = ScaledSize(destBufferRect.Size(),
                                aXResolution, aYResolution);
    bufferDimsChanged = PR_TRUE;
    destBuffer = CreateBuffer(aContentType, destBufferDims);
    if (!destBuffer)
      return result;

  // If we have no buffered data already, then destBuffer will be a fresh buffer
  // and we do not need to clear it below.
  PRBool isClear = mBuffer == nsnull;

  if (destBuffer) {
    if (mBuffer) {
      // Copy the bits
      nsRefPtr<gfxContext> tmpCtx = new gfxContext(destBuffer);
      nsIntPoint offset = -destBufferRect.TopLeft();
      tmpCtx->Scale(aXResolution, aYResolution);
      tmpCtx->Translate(gfxPoint(offset.x, offset.y));
      NS_ASSERTION(curXRes == aXResolution && curYRes == aYResolution,
                   "resolution changes must Clear()!");
      DrawBufferWithRotation(tmpCtx, 1.0, aXResolution, aYResolution);

    mBuffer = destBuffer.forget();
    mBufferRect = destBufferRect;
    mBufferRotation = nsIntPoint(0,0);
  if (bufferDimsChanged) {
    mBufferDims = destBufferDims;

  nsIntRegion invalidate;
  invalidate.Sub(aLayer->GetValidRegion(), destBufferRect);
  result.mRegionToInvalidate.Or(result.mRegionToInvalidate, invalidate);

  result.mContext = GetContextForQuadrantUpdate(drawBounds,
                                                aXResolution, aYResolution);

  gfxUtils::ClipToRegion(result.mContext, result.mRegionToDraw);
  if (aContentType == gfxASurface::CONTENT_COLOR_ALPHA && !isClear) {
  return result;